Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...

1 files changed, 14 insertions, 27 deletions

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 4f471fa3e3c5..60838ddb8564 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -9,6 +9,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/clkdev.h>
+#include <linux/vexpress.h>
 
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void)
 	ca9x4_twd_init();
 }
 
-static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
-{
-	u32 site = v2m_get_master_site();
-
-	/*
-	 * Old firmware was using the "site" component of the command
-	 * to control the DVI muxer (while it should be always 0 ie. MB).
-	 * Newer firmware uses the data register. Keep both for compatibility.
-	 */
-	v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
-	v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
-}
-
 static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
 {
 	unsigned long framesize = 1024 * 768 * 2;
@@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = {
 	.caps		= CLCD_CAP_5551 | CLCD_CAP_565,
 	.check		= clcdfb_check,
 	.decode		= clcdfb_decode,
-	.enable		= ct_ca9x4_clcd_enable,
 	.setup		= ct_ca9x4_clcd_setup,
 	.mmap		= versatile_clcd_mmap_dma,
 	.remove		= versatile_clcd_remove_dma,
@@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
 	&gpio_device,
 };
 
-
-static struct v2m_osc ct_osc1 = {
-	.osc = 1,
-	.rate_min = 10000000,
-	.rate_max = 80000000,
-	.rate_default = 23750000,
-};
-
 static struct resource pmu_resources[] = {
 	[0] = {
 		.start	= IRQ_CT_CA9X4_PMU_CPU0,
@@ -149,10 +128,18 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
+static struct platform_device osc1_device = {
+	.name		= "vexpress-osc",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= (struct resource []) {
+		VEXPRESS_RES_FUNC(0xf, 1),
+	},
+};
+
 static void __init ct_ca9x4_init(void)
 {
 	int i;
-	struct clk *clk;
 
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
@@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void)
 	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
-	ct_osc1.site = v2m_get_master_site();
-	clk = v2m_osc_register("ct:osc1", &ct_osc1);
-	clk_register_clkdev(clk, NULL, "ct:clcd");
-
 	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
 		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
 
 	platform_device_register(&pmu_device);
+	platform_device_register(&osc1_device);
+
+	WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
+			NULL, "ct:clcd"));
 }
 
 #ifdef CONFIG_SMP