ARM: ux500: delete U5500 support

This platform has been obsoleted and was only available inside of
ST-Ericsson, no users of this code are left in the world. This
deletes the core U5500 support entirely in the same manner as the
obsoleted U8500 silicon was previously deleted.

The cpu_is_u5500() macros that can read out the CPU ID is left
until the next kernel cycle, this makes it possible to merge
deletion of dependent drivers without breakage.

This also has the upside of removing the mailbox driver which was
our only driver that was outside the drivers/* hiearchy, now the
machine directory only handles machines and nothing else.

Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Jonas Aberg <jonas.aberg@stericsson.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 162 deletions

diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
deleted file mode 100644
index 0ff4be72a809..000000000000
--- a/arch/arm/mach-ux500/board-u5500.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-	/* I2C */
-	GPIO218_I2C2_SCL        | PIN_INPUT_PULLUP,
-	GPIO219_I2C2_SDA        | PIN_INPUT_PULLUP,
-
-	/* DISPLAY_ENABLE */
-	GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-	/* Backlight Enbale */
-	GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	.sm		= _sm,		\
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2,	0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
-	.mode = LM3530_BL_MODE_MANUAL,
-	.als_input_mode = LM3530_INPUT_ALS1,
-	.max_current = LM3530_FS_CURR_26mA,
-	.pwm_pol_hi = true,
-	.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
-	.brt_ramp_law = 1,      /* Linear */
-	.brt_ramp_fall = LM3530_RAMP_TIME_8s,
-	.brt_ramp_rise = LM3530_RAMP_TIME_8s,
-	.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
-	.als2_resistor_sel = LM3530_ALS_IMPD_Z,
-	.als_vmin = 730,	/* mV */
-	.als_vmax = 1020,	/* mV */
-	.brt_val = 0x7F,	/* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
-	{
-		/* Backlight */
-		I2C_BOARD_INFO("lm3530-led", 0x36),
-		.platform_data = &u5500_als_platform_data,
-	},
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
-	db5500_add_i2c2(parent, &u5500_i2c2_data);
-	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
-	.irq = {
-		.base = 0,
-		.count = 0,
-	},
-	.init_settings = NULL,
-	.init_settings_sz = 0,
-	.pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
-	.name = "ab5500-core",
-	.id = 0,
-	.dev = {
-		.platform_data = &ab5500_plf_data,
-	},
-	.num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
-	&ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
-	db5500_add_uart0(parent, NULL);
-	db5500_add_uart1(parent, NULL);
-	db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	parent = u5500_init_devices();
-	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
-	u5500_i2c_init(parent);
-	u5500_sdi_init(parent);
-	u5500_uart_init(parent);
-
-	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
-		u5500_platform_devices[i]->dev.parent = parent;
-
-	platform_add_devices(u5500_platform_devices,
-		ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.atag_offset	= 0x100,
-	.map_io		= u5500_map_io,
-	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= u5500_init_machine,
-MACHINE_END