Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

1 files changed, 33 insertions, 3 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b771817..0e8fd135a57d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <plat/pincfg.h>
 #include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+	/* SSP0 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD,
+	GPIO146_SSP0_TXD,
+
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+};
+
 static void ab4500_spi_cs_control(u32 command)
 {
 	/* set the FRM signal, which is CS  - TODO */
@@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = {
 	.cs_control = ab4500_spi_cs_control,
 };
 
+static struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+};
+
 static struct spi_board_info u8500_spi_devices[] = {
 	{
 		.modalias = "ab8500",
 		.controller_data = &ab4500_chip_info,
+		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
 		.chip_select = 0,
 		.mode = SPI_MODE_0,
-		.irq = IRQ_AB4500,
+		.irq = IRQ_DB8500_AB8500,
 	},
 };
 
@@ -118,6 +146,10 @@ static void __init u8500_init_machine(void)
 {
 	int i;
 
+	u8500_init_devices();
+
+	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
 	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
 	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
 	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@ static void __init u8500_init_machine(void)
 
 	spi_register_board_info(u8500_spi_devices,
 			ARRAY_SIZE(u8500_spi_devices));
-
-	u8500_init_devices();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")