ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT

SPEAr3xx architecture includes shared/multiplexed irqs for certain set
of devices. The multiplexor provides a single interrupt to parent
interrupt controller (VIC) on behalf of a group of devices.

There can be multiple groups available on SPEAr3xx variants but not
exceeding 4. The number of devices in a group can differ, further they
may share same set of status/mask registers spanning across different
bit masks. Also in some cases the group may not have enable or other
registers. This makes software little complex.

Present implementation was non-DT and had few complex data structures to
decipher banks, number of irqs supported, mask and registers involved.

This patch simplifies the overall design and convert it in to DT.  It
also removes all registration from individual SoC files and bring them
in to common shirq.c.

Also updated the corresponding documentation for DT binding of shirq.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

1 files changed, 0 insertions, 103 deletions

diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 6ec300549960..a69cbfdb07ee 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -17,102 +17,9 @@
 #include <linux/of_platform.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
-#include <plat/shirq.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
 
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-
-
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* spear3xx shared irq */
-static struct shirq_dev_config shirq_ras1_config[] = {
-	{
-		.virq = SPEAR300_VIRQ_IT_PERS_S,
-		.enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
-		.status_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_IT_CHANGE_S,
-		.enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
-		.status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_I2S,
-		.enb_mask = SPEAR300_I2S_IRQ_MASK,
-		.status_mask = SPEAR300_I2S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_TDM,
-		.enb_mask = SPEAR300_TDM_IRQ_MASK,
-		.status_mask = SPEAR300_TDM_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_L,
-		.enb_mask = SPEAR300_CAMERA_L_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_L_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_F,
-		.enb_mask = SPEAR300_CAMERA_F_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_F_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_V,
-		.enb_mask = SPEAR300_CAMERA_V_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_V_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_KEYBOARD,
-		.enb_mask = SPEAR300_KEYBOARD_IRQ_MASK,
-		.status_mask = SPEAR300_KEYBOARD_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_GPIO1,
-		.enb_mask = SPEAR300_GPIO1_IRQ_MASK,
-		.status_mask = SPEAR300_GPIO1_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras1 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
-	.dev_config = shirq_ras1_config,
-	.dev_count = ARRAY_SIZE(shirq_ras1_config),
-	.regs = {
-		.enb_reg = SPEAR300_INT_ENB_MASK_REG,
-		.status_reg = SPEAR300_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK,
-		.clear_reg = -1,
-	},
-};
-
 /* DMAC platform data's slave info */
 struct pl08x_channel_data spear300_dma_info[] = {
 	{
@@ -285,21 +192,11 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
 
 static void __init spear300_dt_init(void)
 {
-	int ret;
-
 	pl080_plat_data.slave_channels = spear300_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			spear300_auxdata_lookup, NULL);
-
-	/* shared irq registration */
-	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
-	if (shirq_ras1.regs.base) {
-		ret = spear_shirq_register(&shirq_ras1);
-		if (ret)
-			pr_err("Error registering Shared IRQ\n");
-	}
 }
 
 static const char * const spear300_dt_board_compat[] = {