Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...

5 files changed, 45 insertions, 19 deletions

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index e16b81ec4b07..1939f521579c 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -23,6 +23,7 @@ cpu-y				:= platsmp.o headsmp.o
 # Shared SoC family objects
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
 CFLAGS_setup-rcar-gen2.o	+= -march=armv7-a
+obj-$(CONFIG_ARCH_RCAR_GEN2)	+= headsmp-apmu.o
 obj-$(CONFIG_ARCH_R8A7790)	+= regulator-quirk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)	+= regulator-quirk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7793)	+= regulator-quirk-rcar-gen2.o
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index f8fcd799d677..a8fa4f7e1f60 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,6 +2,7 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
+extern void shmobile_init_cntvoff(void);
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
@@ -12,6 +13,7 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
 			      unsigned long arg);
 extern bool shmobile_smp_cpu_can_disable(unsigned int cpu);
 extern bool shmobile_smp_init_fallback_ops(void);
+extern void shmobile_boot_apmu(void);
 extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
 					  unsigned int max_cpus);
diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S
new file mode 100644
index 000000000000..5672b5849401
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-apmu.S
@@ -0,0 +1,39 @@
+/*
+ * SMP support for APMU based systems with Cortex A7/A15
+ *
+ * Copyright (C) 2014  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(shmobile_init_cntvoff)
+	/*
+	 * CNTVOFF has to be initialized either from non-secure Hypervisor
+	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
+	 * then it should be handled by the secure code
+	 */
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
+	instr_sync
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
+	instr_sync
+	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
+	instr_sync
+	cps	#SVC_MODE
+	ret	lr
+ENDPROC(shmobile_init_cntvoff)
+
+#ifdef CONFIG_SMP
+ENTRY(shmobile_boot_apmu)
+	bl	shmobile_init_cntvoff
+	b	secondary_startup
+ENDPROC(shmobile_boot_apmu)
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 3ca2c13346f0..4422b615a6ee 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -204,7 +204,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
 int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	/* For this particular CPU register boot vector */
-	shmobile_smp_hook(cpu, __pa_symbol(secondary_startup), 0);
+	shmobile_smp_hook(cpu, __pa_symbol(shmobile_boot_apmu), 0);
 
 	return apmu_wrap(cpu, apmu_power_on);
 }
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 7ab1690fab82..5561dbed7a33 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -70,28 +70,12 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
+	shmobile_init_cntvoff();
+
 	if (of_machine_is_compatible("renesas,r8a7745") ||
 	    of_machine_is_compatible("renesas,r8a7792") ||
 	    of_machine_is_compatible("renesas,r8a7794")) {
 		freq = 260000000 / 8;	/* ZS / 8 */
-		/* CNTVOFF has to be initialized either from non-secure
-		 * Hypervisor mode or secure Monitor mode with SCR.NS==1.
-		 * If TrustZone is enabled then it should be handled by the
-		 * secure code.
-		 */
-		asm volatile(
-		"	cps	0x16\n"
-		"	mrc	p15, 0, r1, c1, c1, 0\n"
-		"	orr	r0, r1, #1\n"
-		"	mcr	p15, 0, r0, c1, c1, 0\n"
-		"	isb\n"
-		"	mov	r0, #0\n"
-		"	mcrr	p15, 4, r0, r0, c14\n"
-		"	isb\n"
-		"	mcr	p15, 0, r1, c1, c1, 0\n"
-		"	isb\n"
-		"	cps	0x13\n"
-			: : : "r0", "r1");
 	} else {
 		/* At Linux boot time the r8a7790 arch timer comes up
 		 * with the counter disabled. Moreover, it may also report