ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.

Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.

Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 177 deletions

diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
deleted file mode 100644
index e3a0279750e3..000000000000
--- a/arch/arm/mach-sa1100/lart.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/lart.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mcp_plat_data lart_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-static void __init lart_init(void)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-#ifdef LART_GREY_LCD
-	inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-	inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-	inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-	inf = &lart_kit01_info;
-#endif
-
-	if (inf)
-		sa11x0_register_lcd(inf);
-
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mcp(&lart_mcp_data);
-}
-
-static struct map_desc lart_io_desc[] __initdata = {
-	{	/* main flash memory */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}, {	/* main flash, alternative location */
-		.virtual	=  0xec000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}
-};
-
-/* LEDs */
-struct gpio_led lart_gpio_leds[] = {
-	{
-		.name			= "lart:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data lart_gpio_led_info = {
-	.leds		= lart_gpio_leds,
-	.num_leds	= ARRAY_SIZE(lart_gpio_leds),
-};
-
-static struct platform_device lart_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &lart_gpio_led_info,
-	}
-};
-static void __init lart_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(lart_io_desc, ARRAY_SIZE(lart_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-	sa1100_register_uart(2, 2);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	platform_device_register(&lart_leds);
-}
-
-MACHINE_START(LART, "LART")
-	.atag_offset	= 0x100,
-	.map_io		= lart_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_machine	= lart_init,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-	.restart	= sa11x0_restart,
-MACHINE_END