Merge commit 'linus/master' into merge-linus

Conflicts:

	arch/x86/kvm/i8254.c

93 files changed, 7367 insertions, 3662 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e8ee7ec9ff6d..f27f6b3d6e6f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -38,16 +38,23 @@ config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
 	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
@@ -114,10 +121,21 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -170,13 +188,41 @@ config MACH_E800
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
 	select PXA27x
 
-config MACH_TRIZEPS4_CONXS
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+	select PXA_SSP
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
 	bool "ConXS Eval Board"
-	depends on MACH_TRIZEPS4
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -189,6 +235,7 @@ config MACH_COLIBRI
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
+	select PXA_SSP
 	select HAVE_PWM
 
 config MACH_LITTLETON
@@ -207,20 +254,42 @@ config MACH_SAAR
 	select PXA930
 
 config MACH_ARMCORE
-	bool "CompuLab CM-X270 modules"
+	bool "CompuLab CM-X255/CM-X270 modules"
 	select PXA27x
 	select IWMMXT
+	select ZONE_DMA if PCI
+	select PXA25x
+	select PXA_SSP
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select LEDS_GPIO
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
 	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
@@ -236,6 +305,16 @@ config MACH_PALMTX
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
 
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
@@ -256,6 +335,9 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
+config MACH_AM200EPD
+	depends on MACH_GUMSTIX_F
+	bool "Enable AM200EPD board support"
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
@@ -343,4 +425,10 @@ config TOSA_BT
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on tosa.
 
+config PXA_HAVE_BOARD_IRQS
+	bool
+
+config PXA_HAVE_ISA_IRQS
+	bool
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 99ecbe7f8506..d31c9979cfa3 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -6,7 +6,12 @@
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
 				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
+
+ifeq ($(CONFIG_CPU_FREQ),y)
+obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
+endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
@@ -22,27 +27,33 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_MACH_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
-obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
-obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
-obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
-obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_MACH_E330)		+= e330.o
+obj-$(CONFIG_MACH_E350)		+= e350.o
+obj-$(CONFIG_MACH_E740)		+= e740.o
+obj-$(CONFIG_MACH_E750)		+= e750.o
+obj-$(CONFIG_MACH_E400)		+= e400.o
+obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -53,7 +64,8 @@ obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
@@ -61,12 +73,11 @@ led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
 ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
 endif
 
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
deleted file mode 100644
index 5c67b188a3ba..000000000000
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
- * (uses a Maxim MAX7310 8 Port IO Expander)
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <richard@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <mach/akita.h>
-
-/* MAX7310 Regiser Map */
-#define MAX7310_INPUT    0x00
-#define MAX7310_OUTPUT   0x01
-#define MAX7310_POLINV   0x02
-#define MAX7310_IODIR    0x03 /* 1 = Input, 0 = Output */
-#define MAX7310_TIMEOUT  0x04
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
-
-/* I2C Magic */
-I2C_CLIENT_INSMOD;
-
-static int max7310_write(struct i2c_client *client, int address, int data);
-static struct i2c_client max7310_template;
-static void akita_ioexp_work(struct work_struct *private_);
-
-static struct device *akita_ioexp_device;
-static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work);
-
-
-/*
- * MAX7310 Access
- */
-static int max7310_config(struct device *dev, int iomode, int polarity)
-{
-	int ret;
-	struct i2c_client *client = to_i2c_client(dev);
-
-	ret = max7310_write(client, MAX7310_POLINV, polarity);
-	if (ret < 0)
-		return ret;
-	ret = max7310_write(client, MAX7310_IODIR, iomode);
-	return ret;
-}
-
-static int max7310_set_ouputs(struct device *dev, int outputs)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	return max7310_write(client, MAX7310_OUTPUT, outputs);
-}
-
-/*
- * I2C Functions
- */
-static int max7310_write(struct i2c_client *client, int address, int value)
-{
-	u8 data[2];
-
-	data[0] = address & 0xff;
-	data[1] = value & 0xff;
-
-	if (i2c_master_send(client, data, 2) == 2)
-		return 0;
-	return -1;
-}
-
-static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	int err;
-
-	if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
-		return -ENOMEM;
-
-	max7310_template.adapter = adapter;
-	max7310_template.addr = address;
-
-	memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
-
-	if ((err = i2c_attach_client(new_client))) {
-		kfree(new_client);
-		return err;
-	}
-
-	max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
-	akita_ioexp_device = &new_client->dev;
-	schedule_work(&akita_ioexp);
-
-	return 0;
-}
-
-static int max7310_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, max7310_detect);
-}
-
-static int max7310_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	akita_ioexp_device = NULL;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
-	kfree(client);
-	return 0;
-}
-
-static struct i2c_driver max7310_i2c_driver = {
-	.driver = {
-		.name	= "akita-max7310",
-	},
-	.id		= I2C_DRIVERID_AKITAIOEXP,
-	.attach_adapter	= max7310_attach_adapter,
-	.detach_client	= max7310_detach_client,
-};
-
-static struct i2c_client max7310_template = {
-	name:   "akita-max7310",
-	driver: &max7310_i2c_driver,
-};
-
-void akita_set_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value |= bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-void akita_reset_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value &= ~bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-EXPORT_SYMBOL(akita_set_ioexp);
-EXPORT_SYMBOL(akita_reset_ioexp);
-
-static void akita_ioexp_work(struct work_struct *private_)
-{
-	if (akita_ioexp_device)
-		max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
-}
-
-
-#ifdef CONFIG_PM
-static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	flush_scheduled_work();
-	return 0;
-}
-
-static int akita_ioexp_resume(struct platform_device *pdev)
-{
-	schedule_work(&akita_ioexp);
-	return 0;
-}
-#else
-#define akita_ioexp_suspend NULL
-#define akita_ioexp_resume NULL
-#endif
-
-static int __init akita_ioexp_probe(struct platform_device *pdev)
-{
-	return i2c_add_driver(&max7310_i2c_driver);
-}
-
-static int akita_ioexp_remove(struct platform_device *pdev)
-{
-	i2c_del_driver(&max7310_i2c_driver);
-	return 0;
-}
-
-static struct platform_driver akita_ioexp_driver = {
-	.probe		= akita_ioexp_probe,
-	.remove		= akita_ioexp_remove,
-	.suspend	= akita_ioexp_suspend,
-	.resume		= akita_ioexp_resume,
-	.driver		= {
-		.name	= "akita-ioexp",
-	},
-};
-
-static int __init akita_ioexp_init(void)
-{
-	return platform_driver_register(&akita_ioexp_driver);
-}
-
-static void __exit akita_ioexp_exit(void)
-{
-	platform_driver_unregister(&akita_ioexp_driver);
-}
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Akita IO-Expander driver");
-MODULE_LICENSE("GPL");
-
-fs_initcall(akita_ioexp_init);
-module_exit(akita_ioexp_exit);
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 000000000000..b965085a37b9
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,374 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/pxafb.h>
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+	.pixclock	= 40000,
+	.xres		= 1200,
+	.yres		= 842,
+	.bpp		= 16,
+	.hsync_len	= 2,
+	.left_margin	= 2,
+	.right_margin	= 2,
+	.vsync_len	= 1,
+	.upper_margin	= 2,
+	.lower_margin	= 25,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+	.pixclock	= 40000,
+	.xres		= 1088,
+	.yres		= 791,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 8,
+	.right_margin	= 30,
+	.vsync_len	= 8,
+	.upper_margin	= 10,
+	.lower_margin	= 8,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+	.pixclock	= 40189,
+	.xres		= 832,
+	.yres		= 622,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 34,
+	.right_margin	= 34,
+	.vsync_len	= 25,
+	.upper_margin	= 0,
+	.lower_margin	= 2,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+	.modes		= &am200_fb_mode_6inch,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am200_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	gpio_direction_output(LED_GPIO_PIN, 0);
+	gpio_direction_output(STDBY_GPIO_PIN, 0);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(ERR_GPIO_PIN);
+
+	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+	return 0;
+
+err_req_gpio:
+	while (i > 0)
+		gpio_free(gpios[i--]);
+
+	return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+	int i;
+
+	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+	/* rough check if this is our desired fb and not something else */
+	if ((info->var.xres != am200_fb_info.modes->xres)
+		|| (info->var.yres != am200_fb_info.modes->yres))
+		return 0;
+
+	/* we've now been notified that we have our new fb */
+	am200_board.metromem = info->screen_base;
+	am200_board.host_fbinfo = info;
+
+	/* try to refcount host drv since we are the consumer after this */
+	if (!try_module_get(info->fbops->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (info != am200_board.host_fbinfo)
+		return 0;
+
+	module_put(am200_board.host_fbinfo->fbops->owner);
+	return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+				 unsigned long event, void *data)
+{
+	struct fb_event *evdata = data;
+	struct fb_info *info = evdata->info;
+
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (event == FB_EVENT_FB_REGISTERED)
+		return am200_share_video_mem(info);
+	else if (event == FB_EVENT_FB_UNREGISTERED)
+		return am200_unshare_video_mem(info);
+
+	return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+	.notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init am200_presetup_fb(void)
+{
+	int fw;
+	int fh;
+	int padding_size;
+	int totalsize;
+
+	switch (panel_type) {
+	case 6:
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	case 8:
+		am200_fb_info.modes = &am200_fb_mode_8inch;
+		break;
+	case 97:
+		am200_fb_info.modes = &am200_fb_mode_9inch7;
+		break;
+	default:
+		dev_err(&am200_device->dev, "invalid panel_type selection,"
+						" setting to 6\n");
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	}
+
+	/* the frame buffer is divided as follows:
+	command | CRC | padding
+	16kb waveform data | CRC | padding
+	image data | CRC
+	*/
+
+	fw = am200_fb_info.modes->xres;
+	fh = am200_fb_info.modes->yres;
+
+	/* waveform must be 16k + 2 for checksum */
+	am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+	padding_size = PAGE_SIZE + (4 * fw);
+
+	/* total is 1 cmd , 1 wfm, padding and image */
+	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+	/* save this off because we're manipulating fw after this and
+	 * we'll need it when we're ready to setup the framebuffer */
+	am200_board.fw = fw;
+	am200_board.fh = fh;
+
+	/* the reason we do this adjustment is because we want to acquire
+	 * more framebuffer memory without imposing custom awareness on the
+	 * underlying pxafb driver */
+	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+	/* we divide since we told the LCD controller we're 16bpp */
+	am200_fb_info.modes->xres /= 2;
+
+	set_pxa_fb_info(&am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+	int fw;
+	int fh;
+
+	fw = am200_board.fw;
+	fh = am200_board.fh;
+
+	/* metromem was set up by the notifier in share_video_mem so now
+	 * we can use its value to calculate the other entries */
+	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+	par->metromem_wfm = am200_board.metromem + fw;
+	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+	return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+	struct metronomefb_par *par = dev_id;
+
+	wake_up_interruptible(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
+				"AM200", info->par);
+	if (ret)
+		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+	return wait_event_interruptible_timeout(par->waitq,
+					gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+	.owner			= THIS_MODULE,
+	.setup_irq		= am200_setup_irq,
+	.setup_io		= am200_init_gpio_regs,
+	.setup_fb		= am200_setup_fb,
+	.set_rst		= am200_set_rst,
+	.set_stdby		= am200_set_stdby,
+	.met_wait_event		= am200_wait_event,
+	.met_wait_event_intr	= am200_wait_event_intr,
+	.get_panel_type		= am200_get_panel_type,
+	.cleanup		= am200_cleanup,
+};
+
+static int __init am200_init(void)
+{
+	int ret;
+
+	/* before anything else, we request notification for any fb
+	 * creation events */
+	fb_register_client(&am200_fb_notif);
+
+	/* request our platform independent driver */
+	request_module("metronomefb");
+
+	am200_device = platform_device_alloc("metronomefb", -1);
+	if (!am200_device)
+		return -ENOMEM;
+
+	/* the am200_board that will be seen by metronomefb is a copy */
+	platform_device_add_data(am200_device, &am200_board,
+					sizeof(am200_board));
+
+	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+	ret = platform_device_add(am200_device);
+
+	if (ret) {
+		platform_device_put(am200_device);
+		fb_unregister_client(&am200_fb_notif);
+		return ret;
+	}
+
+	am200_presetup_fb();
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+module_init(am200_init);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 000000000000..83a4cdf08176
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+#define GPIO_NAND_CS	(5)
+#define GPIO_NAND_ALE	(4)
+#define GPIO_NAND_CLE	(3)
+#define GPIO_NAND_RB	(10)
+
+static unsigned long cmx255_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO81_SSP2_CLK_OUT,
+	GPIO82_SSP2_FRM_OUT,
+	GPIO83_SSP2_TXD,
+	GPIO84_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO9_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
+	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
+	GPIO10_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO22_GPIO,	/* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "rtc-max6902",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+};
+
+static void __init cmx255_init_rtc(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+	{
+		.name		= "ARMmon",
+		.size		= 0x00030000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "ARMmon setup block",
+		.size		= 0x00010000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "kernel",
+		.size		= 0x00160000,
+		.offset		= MTDPART_OFS_APPEND,
+	} , {
+		.name		= "ramdisk",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= cmx255_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
+	}
+};
+
+static struct resource cmx255_nor_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.dev	= {
+		.platform_data = cmx255_nor_flash_data,
+	},
+	.resource = &cmx255_nor_resource,
+	.num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+	platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+	[0] = {
+		.start = PXA_CS1_PHYS,
+		.end   = PXA_CS1_PHYS + 11,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+	[0] = {
+		.name	= "cmx255-nand",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= 0,
+	},
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+	.gpio_nce = GPIO_NAND_CS,
+	.gpio_cle = GPIO_NAND_CLE,
+	.gpio_ale = GPIO_NAND_ALE,
+	.gpio_rdy = GPIO_NAND_RB,
+	.gpio_nwp = -1,
+	.parts = cmx255_nand_parts,
+	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
+	.chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+	.name		= "gpio-nand",
+	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
+	.resource	= cmx255_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx255_nand_platdata,
+	}
+};
+
+static void __init cmx255_init_nand(void)
+{
+	platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+	cmx255_init_rtc();
+	cmx255_init_nor();
+	cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
deleted file mode 100644
index 48f532f4cb51..000000000000
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx270_pci_init_irq(int irq_gpio);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
-#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
-#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
-#else
-#define cmx270_pci_init_irq(x) do {} while (0)
-#define cmx270_pci_suspend(x) do {} while (0)
-#define cmx270_pci_resume(x) do {} while (0)
-#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index af003a269534..df83b97f303f 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,46 +14,22 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
-#include <linux/leds.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/bitfield.h>
-
-#include <asm/hardware/it8152.h>
 
 #include "generic.h"
-#include "cm-x270-pci.h"
-
-/* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE	(0xe8000000)
-#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
 
+/* physical address if local-bus attached devices */
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
 /* GPIO IRQ usage */
-#define GPIO10_ETHIRQ		(10)
-#define GPIO22_IT8152_IRQ	(22)
 #define GPIO83_MMC_IRQ		(83)
-#define GPIO95_GFXIRQ		(95)
 
-#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
 #define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
-#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
 
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
@@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO83_GPIO,	/* MMC card detect */
 };
 
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx270_dm9000_resource[] = {
-	[0] = {
-		.start = DM9000_PHYS_BASE,
-		.end   = DM9000_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DM9000_PHYS_BASE + 8,
-		.end   = DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device cmx270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.resource	= cmx270_dm9000_resource,
-	.dev		= {
-		.platform_data = &cmx270_dm9000_platdata,
-	}
-};
-
-static void __init cmx270_init_dm9000(void)
-{
-	platform_device_register(&cmx270_dm9000_device);
-}
-#else
-static inline void cmx270_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
-	.name		= "ucb1400_ts",
-	.id		= -1,
-};
-
-static void __init cmx270_init_touchscreen(void)
-{
-	platform_device_register(&cmx270_ts_device);
-}
-#else
-static inline void cmx270_init_touchscreen(void) {}
-#endif
-
 /* V3020 RTC */
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
@@ -245,44 +165,6 @@ static void __init cmx270_init_rtc(void)
 static inline void cmx270_init_rtc(void) {}
 #endif
 
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
-	[0] = {
-		.name = "cm-x270:red",
-		.default_trigger = "nand-disk",
-		.gpio = 93,
-		.active_low = 1,
-	},
-	[1] = {
-		.name = "cm-x270:green",
-		.default_trigger = "heartbeat",
-		.gpio = 94,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx270_leds),
-	.leds = cmx270_leds,
-};
-
-static struct platform_device cmx270_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx270_gpio_led_pdata,
-	},
-};
-
-static void __init cmx270_init_leds(void)
-{
-	platform_device_register(&cmx270_led_device);
-}
-#else
-static inline void cmx270_init_leds(void) {}
-#endif
-
 /* 2700G graphics */
 #if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
@@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void)
 static inline void cmx270_init_2700G(void) {}
 #endif
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x03) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x06) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
-{
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx270_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx270_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx270_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx270_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx270_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx270_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx270_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
-}
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
-
-static void __init cmx270_init_display(void)
-{
-	set_pxa_fb_info(cmx270_display);
-}
-#else
-static inline void cmx270_init_display(void) {}
-#endif
-
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cmx270_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= cmx270_ohci_init,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 };
 
 static void __init cmx270_init_ohci(void)
@@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void)
 static inline void cmx270_init_mmc(void) {}
 #endif
 
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
-	cmx270_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
-	cmx270_pci_resume();
-
-	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
-
-	return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
-	.name = "pm",
-	.resume = cmx270_resume,
-	.suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
-	.cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
-{
-	int error;
-	error = sysdev_class_register(&cmx270_pm_sysclass);
-	if (error == 0)
-		error = sysdev_register(&cmx270_pm_device);
-	return error;
-}
-#else
-static int __init cmx270_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx270_init_ac97(void) {}
-#endif
-
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
 {
-	cmx270_pm_init();
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
-	cmx270_init_dm9000();
 	cmx270_init_rtc();
-	cmx270_init_display();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
-	cmx270_init_ac97();
-	cmx270_init_touchscreen();
-	cmx270_init_leds();
 	cmx270_init_2700G();
 }
-
-static void __init cmx270_init_irq(void)
-{
-	pxa27x_init_irq();
-
-	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-
-	it8152_base_address = CMX270_IT8152_VIRT;
-}
-#else
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
-	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= cmx270_map_io,
-	.init_irq	= cmx270_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx270_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 2d5bcea1e520..3156b25f6e9d 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
  *
  * PCI bios-type initialisation for PCI machines
  *
@@ -28,7 +28,7 @@
 #include <asm/hardware/it8152.h>
 
 unsigned long it8152_base_address;
-static int cmx270_it8152_irq_gpio;
+static int cmx2xx_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -36,13 +36,13 @@ static int cmx270_it8152_irq_gpio;
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-X270\n");
+		pr_info("Adjusting zones for CM-X2XX\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -57,29 +57,29 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	}
 }
 
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
+	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(int irq_gpio)
+void __cmx2xx_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
 
-	cmx270_it8152_irq_gpio = irq_gpio;
+	cmx2xx_it8152_irq_gpio = irq_gpio;
 
 	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
 
-	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
 static unsigned long sleep_save_ite[10];
 
-void __cmx270_pci_suspend(void)
+void __cmx2xx_pci_suspend(void)
 {
 	/* save ITE state */
 	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
@@ -91,7 +91,7 @@ void __cmx270_pci_suspend(void)
 	__raw_writel((0), IT8152_INTC_LPCNIRR);
 }
 
-void __cmx270_pci_resume(void)
+void __cmx2xx_pci_resume(void)
 {
 	/* restore IT8152 state */
 	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
@@ -99,12 +99,12 @@ void __cmx270_pci_resume(void)
 	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
 }
 #else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
 #endif
 
 /* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
@@ -116,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-X270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
+	  but defining a platform for each possible base of CM-X2XX is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
 		return IT8152_PCI_INTA;
 
-	/* ATXBase/SB-x270 CardBus */
+	/* ATXBase/SB-X2XX CardBus */
 	if (slot == 8 || slot == 0)
 		return IT8152_PCI_INTB;
 
@@ -131,7 +131,11 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	if (slot == 9)
 		return IT8152_PCI_INTA;
 
-	/* SB-x270 Ethernet */
+	/* CM-x255 Onboard Ethernet */
+	if (slot == 15)
+		return IT8152_PCI_INTC;
+
+	/* SB-x2xx Ethernet */
 	if (slot == 16)
 		return IT8152_PCI_INTA;
 
@@ -144,9 +148,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	return(0);
 }
 
-static void cmx270_pci_preinit(void)
+static void cmx2xx_pci_preinit(void)
 {
-	pr_info("Initializing CM-X270 PCI subsystem\n");
+	pr_info("Initializing CM-X2XX PCI subsystem\n");
 
 	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
 	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
@@ -200,21 +204,21 @@ static void cmx270_pci_preinit(void)
 	}
 }
 
-static struct hw_pci cmx270_pci __initdata = {
+static struct hw_pci cmx2xx_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx270_pci_map_irq,
+	.map_irq	= cmx2xx_pci_map_irq,
 	.nr_controllers	= 1,
 	.setup		= it8152_pci_setup,
 	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx270_pci_preinit,
+	.preinit	= cmx2xx_pci_preinit,
 };
 
-static int __init cmx270_init_pci(void)
+static int __init cmx2xx_init_pci(void)
 {
 	if (machine_is_armcore())
-		pci_common_init(&cmx270_pci);
+		pci_common_init(&cmx2xx_pci);
 
 	return 0;
 }
 
-subsys_initcall(cmx270_init_pci);
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 000000000000..e24aad2e3ad7
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 000000000000..0b3ce3b6d896
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,531 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE	(0xe8000000)
+#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED		(27)
+#define CMX255_GPIO_GREEN	(32)
+#define CMX270_GPIO_RED		(93)
+#define CMX270_GPIO_GREEN	(94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ		(22)
+#define GPIO10_ETHIRQ		(10)
+#define CMX255_GPIO_IT8152_IRQ	(0)
+#define CMX270_GPIO_IT8152_IRQ	(22)
+
+#define CMX255_ETHIRQ		IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+	[0] = {
+		.start = CMX255_DM9000_PHYS_BASE,
+		.end   = CMX255_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX255_DM9000_PHYS_BASE + 4,
+		.end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX255_ETHIRQ,
+		.end   = CMX255_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+	[0] = {
+		.start = CMX270_DM9000_PHYS_BASE,
+		.end   = CMX270_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX270_DM9000_PHYS_BASE + 8,
+		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX270_ETHIRQ,
+		.end   = CMX270_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.dev		= {
+		.platform_data = &cmx270_dm9000_platdata,
+	}
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+	if (cpu_is_pxa25x())
+		cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+	else
+		cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+	platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+	.name		= "ucb1400_ts",
+	.id		= -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+	platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+	[0] = {
+		.name = "cm-x2xx:red",
+		.default_trigger = "nand-disk",
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x2xx:green",
+		.default_trigger = "heartbeat",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx2xx_leds),
+	.leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx2xx_gpio_led_pdata,
+	},
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+	if (cpu_is_pxa25x()) {
+		cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+	} else {
+		cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+	}
+	platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+  Display definitions
+  keep these for backwards compatibility, although symbolic names (as
+  e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240	0
+#define MTYPE_TFT640x480	1
+#define MTYPE_CRT640x480	2
+#define MTYPE_CRT800x600	3
+#define MTYPE_TFT320x240	6
+#define MTYPE_STN640x480	7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+	.pixclock	= 76923,
+	.bpp		= 8,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 3,
+	.vsync_len	= 2,
+	.left_margin	= 3,
+	.upper_margin	= 0,
+	.right_margin	= 3,
+	.lower_margin	= 0,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+	.modes		= &generic_stn_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x03) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 60,
+	.vsync_len	= 2,
+	.left_margin	= 70,
+	.upper_margin	= 10,
+	.right_margin	= 70,
+	.lower_margin	= 5,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+	.modes		= &generic_tft_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 81,
+	.upper_margin	= 33,
+	.right_margin	= 16,
+	.lower_margin	= 10,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+	.modes		= &generic_crt_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+	.pixclock	= 28846,
+	.bpp		= 8,
+	.xres		= 800,
+	.yres	  	= 600,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 26,
+	.upper_margin	= 21,
+	.right_margin	= 26,
+	.lower_margin	= 11,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+	.modes		= &generic_crt_800x600_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+	.pixclock	= 134615,
+	.bpp		= 16,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 63,
+	.vsync_len	= 7,
+	.left_margin	= 75,
+	.upper_margin	= 0,
+	.right_margin	= 15,
+	.lower_margin	= 15,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+	.modes		= &generic_tft_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x06) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+	.pixclock	= 57692,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 4,
+	.vsync_len	= 2,
+	.left_margin	= 10,
+	.upper_margin	= 5,
+	.right_margin	= 10,
+	.lower_margin	= 5,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+	.modes		= &generic_stn_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+	int disp_type = simple_strtol(str, NULL, 0);
+	switch (disp_type) {
+	case MTYPE_STN320x240:
+		cmx2xx_display = &generic_stn_320x240;
+		break;
+	case MTYPE_TFT640x480:
+		cmx2xx_display = &generic_tft_640x480;
+		break;
+	case MTYPE_CRT640x480:
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	case MTYPE_CRT800x600:
+		cmx2xx_display = &generic_crt_800x600;
+		break;
+	case MTYPE_TFT320x240:
+		cmx2xx_display = &generic_tft_320x240;
+		break;
+	case MTYPE_STN640x480:
+		cmx2xx_display = &generic_stn_640x480;
+		break;
+	default: /* fallback to CRT 640x480 */
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	}
+	return 1;
+}
+
+/*
+   This should be done really early to get proper configuration for
+   frame buffer.
+   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+   has limitied line length for kernel command line, and also it will
+   break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+	set_pxa_fb_info(cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+{
+	cmx2xx_pci_suspend();
+
+	/* save MSC registers */
+	sleep_save_msc[0] = MSC0;
+	sleep_save_msc[1] = MSC1;
+	sleep_save_msc[2] = MSC2;
+
+	/* setup power saving mode registers */
+	PCFR = 0x0;
+	PSLR = 0xff400000;
+	PMCR  = 0x00000005;
+	PWER  = 0x80000000;
+	PFER  = 0x00000000;
+	PRER  = 0x00000000;
+	PGSR0 = 0xC0018800;
+	PGSR1 = 0x004F0002;
+	PGSR2 = 0x6021C000;
+	PGSR3 = 0x00020000;
+
+	return 0;
+}
+
+static int cmx2xx_resume(struct sys_device *dev)
+{
+	cmx2xx_pci_resume();
+
+	/* restore MSC registers */
+	MSC0 = sleep_save_msc[0];
+	MSC1 = sleep_save_msc[1];
+	MSC2 = sleep_save_msc[2];
+
+	return 0;
+}
+
+static struct sysdev_class cmx2xx_pm_sysclass = {
+	.name = "pm",
+	.resume = cmx2xx_resume,
+	.suspend = cmx2xx_suspend,
+};
+
+static struct sys_device cmx2xx_pm_device = {
+	.cls = &cmx2xx_pm_sysclass,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+	int error;
+	error = sysdev_class_register(&cmx2xx_pm_sysclass);
+	if (error == 0)
+		error = sysdev_register(&cmx2xx_pm_device);
+	return error;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+	cmx2xx_pm_init();
+
+	if (cpu_is_pxa25x())
+		cmx255_init();
+	else
+		cmx270_init();
+
+	cmx2xx_init_dm9000();
+	cmx2xx_init_display();
+	cmx2xx_init_ac97();
+	cmx2xx_init_touchscreen();
+	cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+	pxa27x_init_irq();
+
+	if (cpu_is_pxa25x()) {
+		pxa25x_init_irq();
+		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+	} else {
+		pxa27x_init_irq();
+		cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+	}
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX2XX_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+	it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= cmx2xx_map_io,
+	.init_irq	= cmx2xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cmx2xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 000000000000..deb46cd144bf
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa300.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+#include <mach/pxa3xx_nand.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+#define CM_X300_ETH_PHYS	0x08000010
+
+#define GPIO82_MMC2_IRQ		(82)
+#define GPIO85_MMC2_WP		(85)
+
+#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+
+static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* BTUART */
+	GPIO111_UART2_RTS,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+	GPIO113_UART2_TXD,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+	/* STUART */
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+	/* AC97 */
+	GPIO23_AC97_nACRESET,
+	GPIO24_AC97_SYSCLK,
+	GPIO29_AC97_BITCLK,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+
+	/* Keypad */
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO4_2_KP_MKOUT_5,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
+
+	/* FFUART */
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+	GPIO31_UART1_TXD,
+	GPIO32_UART1_CTS,
+	GPIO37_UART1_RTS,
+	GPIO33_UART1_DCD,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+	GPIO35_UART1_RI,
+	GPIO36_UART1_DTR,
+
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
+	GPIO85_GPIO,			/* MMC WP */
+	GPIO99_GPIO,			/* Ethernet IRQ */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= CM_X300_ETH_PHYS,
+		.end	= CM_X300_ETH_PHYS + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CM_X300_ETH_PHYS + 0x4,
+		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &cm_x300_dm9000_platdata,
+	}
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+	platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38000,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 0,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.cmap_greyscale	= 0,
+	},
+	[1] = {
+		.pixclock	= 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.cmap_greyscale	= 0,
+	},
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+	.modes			= cm_x300_lcd_modes,
+	.num_modes		= 2,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+	set_pxa_fb_info(&cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+	[0] = {
+		.name        = "OBM",
+		.offset      = 0,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "U-Boot",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Environment",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+	},
+	[3] = {
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K + SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[4] = {
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+	},
+	[5] = {
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+	pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+   no detection/ro pins */
+static int cm_x300_mci_init(struct device *dev,
+			    irq_handler_t cm_x300_detect_int,
+			    void *data)
+{
+	return 0;
+}
+
+static void cm_x300_mci_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci_init,
+	.exit		= cm_x300_mci_exit,
+};
+
+static int cm_x300_mci2_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO85_MMC2_WP);
+}
+
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+			     void *data)
+{
+	int err;
+
+	/*
+	 * setup GPIO for CM-X300 MMC controller
+	 */
+	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+	gpio_direction_input(GPIO82_MMC2_IRQ);
+
+	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
+	if (err)
+		goto err_request_wp;
+	gpio_direction_input(GPIO85_MMC2_WP);
+
+	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: MMC/SD/SDIO: "
+				"can't request card detect IRQ\n", __func__);
+		goto err_request_irq;
+	}
+
+	return 0;
+
+err_request_irq:
+	gpio_free(GPIO85_MMC2_WP);
+err_request_wp:
+	gpio_free(GPIO82_MMC2_IRQ);
+err_request_cd:
+	return err;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+	free_irq(CM_X300_MMC2_IRQ, data);
+	gpio_free(GPIO82_MMC2_IRQ);
+	gpio_free(GPIO85_MMC2_WP);
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci2_init,
+	.exit		= cm_x300_mci2_exit,
+	.get_ro		= cm_x300_mci2_ro,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+	pxa_set_mci_info(&cm_x300_mci_platform_data);
+	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+	[0] = {
+		.name = "cm-x300:green",
+		.default_trigger = "heartbeat",
+		.gpio = 79,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cm_x300_leds),
+	.leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_gpio_led_pdata,
+	},
+};
+
+static void __init cm_x300_init_leds(void)
+{
+	platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+	.gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+	.gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+	[0] = {
+		I2C_BOARD_INFO("pca9555", 0x24),
+		.platform_data = &cm_x300_gpio_ext_pdata_0,
+	},
+	[1] = {
+		I2C_BOARD_INFO("pca9555", 0x25),
+		.platform_data = &cm_x300_gpio_ext_pdata_1,
+	},
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, cm_x300_gpio_ext_info,
+				ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+static void __init cm_x300_init(void)
+{
+	/* board-processor specific GPIO initialization */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+
+	cm_x300_init_dm9000();
+	cm_x300_init_lcd();
+	cm_x300_init_ohci();
+	cm_x300_init_mmc();
+	cm_x300_init_nand();
+	cm_x300_init_leds();
+	cm_x300_init_i2c();
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cm_x300_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index abce13c846c5..e8473624427e 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -29,12 +29,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long colibri_pin_config[] __initdata = {
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+};
+
 /*
  * Flash
  */
@@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = {
 
 static void __init colibri_init(void)
 {
-	/* DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e703a8d209e2..65558d6aa220 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,7 +20,12 @@
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
+#include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -28,7 +33,6 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,11 +41,12 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl.h>
 
@@ -52,6 +57,61 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long corgi_pin_config[] __initdata = {
+	/* Static Memory I/O */
+	GPIO78_nCS_2,	/* w100fb */
+	GPIO80_nCS_4,	/* scoop */
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
+	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
+	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
+	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 /*
  * Corgi SCOOP Device
@@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
 static struct scoop_config corgi_scoop_setup = {
 	.io_dir 	= CORGI_SCOOP_IO_DIR,
 	.io_out		= CORGI_SCOOP_IO_OUT,
+	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
 };
 
 struct platform_device corgiscoop_device = {
@@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = {
 	.resource	= corgi_scoop_resources,
 };
 
-static void corgi_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.devs         = &corgi_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = corgi_pcmcia_init,
 };
 
 EXPORT_SYMBOL(corgiscoop_device);
 
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &corgiscoop_device.dev,
-	},
-	.id		= -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= CORGI_GPIO_LCDCON_CS,
-	.cs_ads7846	= CORGI_GPIO_ADS7846_CS,
-	.cs_max1111	= CORGI_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 76,
-	.clk_ads7846	= 2,
-	.clk_max1111	= 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-	corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-	corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-	.change  = w100_lcdtg_init,
-	.suspend = w100_lcdtg_suspend,
-	.resume  = w100_lcdtg_init,
-};
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
@@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
 };
 
 static struct w100fb_mach_info corgi_fb_info = {
-	.tg         = &corgi_lcdtg_info,
 	.init_mode  = INIT_MODE_ROTATED,
 	.mem        = &corgi_fb_mem,
 	.regs       = &corgi_fb_regs,
@@ -268,60 +259,10 @@ static struct platform_device corgifb_device = {
 	.resource	= corgi_fb_resources,
 	.dev            = {
 		.platform_data = &corgi_fb_info,
-		.parent = &corgissp_device.dev,
 	},
 
 };
 
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
-	.name = "corgi-bl",
-	.max_intensity = 0x2f,
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.set_bl_intensity = corgi_bl_set_intensity,
-	.kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.parent = &corgifb_device.dev,
-		.platform_data	= &corgi_bl_machinfo,
-	},
-	.id		= -1,
-};
-
-
 /*
  * Corgi Keyboard Device
  */
@@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = {
 	.id		= -1,
 };
 
-
 /*
  * Corgi LEDs
  */
-static struct platform_device corgiled_device = {
-	.name		= "corgi-led",
-	.id		= -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
-	if (!get_hsync_invperiod)
-		return 0;
-
-	return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
-	if (get_hsync_invperiod)
-		symbol_put(w100fb_get_hsynclen);
-	get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
-	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
-	[0] = {
-		.start		= CORGI_IRQ_GPIO_TP_INT,
-		.end		= CORGI_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+	{
+		.name			= "corgi:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= CORGI_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "corgi:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= CORGI_GPIO_LED_GREEN,
 	},
 };
 
-static struct corgits_machinfo  corgi_ts_machinfo = {
-	.get_hsync_invperiod = corgi_get_hsync_invperiod,
-	.put_hsync           = corgi_put_hsync,
-	.wait_hsync          = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+	.leds		= corgi_gpio_leds,
+	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
 };
 
-static struct platform_device corgits_device = {
-	.name		= "corgi-ts",
+static struct platform_device corgiled_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
- 		.parent = &corgissp_device.dev,
-		.platform_data	= &corgi_ts_machinfo,
+		.platform_data = &corgi_gpio_leds_info,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(corgits_resources),
-	.resource	= corgits_resources,
 };
 
-
 /*
  * MMC/SD Device
  *
@@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
 
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
 
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
 	if (err)
-		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		goto err_free_2;
 
+	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+	gpio_direction_input(CORGI_GPIO_nSD_WP);
+	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING,
+				"MMC card detect", data);
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_3;
+	}
+	return 0;
+
+err_free_3:
+	gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	else
-		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
 }
 
 static int corgi_mci_get_ro(struct device *dev)
 {
-	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+	return gpio_get_value(CORGI_GPIO_nSD_WP);
 }
 
 static void corgi_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(CORGI_GPIO_SD_PWR);
+	gpio_free(CORGI_GPIO_nSD_WP);
+	gpio_free(CORGI_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
  */
 static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
-	else
-		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static int corgi_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+	gpio_free(CORGI_GPIO_IR_ON);
+}
+
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = corgi_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= corgi_irda_transceiver_mode,
+	.startup		= corgi_irda_startup,
+	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+	.cs_control	= corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+	void (*kick_batt)(void);
+
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
+	}
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= -1,
+	.kick_battery		= corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+	.cs_control	= corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+	.cs_control	= corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.platform_data	= &corgi_ads7846_info,
+		.controller_data= &corgi_ads7846_chip,
+		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.platform_data	= &corgi_lcdcon_info,
+		.controller_data= &corgi_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.controller_data= &corgi_max1111_chip,
+	},
+};
+
+static void __init corgi_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
 
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
-	&corgissp_device,
 	&corgifb_device,
 	&corgikbd_device,
-	&corgibl_device,
-	&corgits_device,
 	&corgiled_device,
 };
 
@@ -498,7 +552,8 @@ static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
 	arm_machine_restart('h');
 }
 
@@ -506,7 +561,8 @@ static void corgi_restart(char mode)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
 	arm_machine_restart('h');
 }
 
@@ -515,20 +571,12 @@ static void __init corgi_init(void)
 	pm_power_off = corgi_poweroff;
 	arm_pm_restart = corgi_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
-	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
deleted file mode 100644
index 311baf149b07..000000000000
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- *   Corgi - LCD to ATI Imageon w100 (Wallaby)
- *   Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/akita.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/sharpsl.h>
-#include <mach/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS     0x00
-#define PHACTRL_ADRS    0x01
-#define DUTYCTRL_ADRS   0x02
-#define POWERREG0_ADRS  0x03
-#define POWERREG1_ADRS  0x04
-#define GPOR3_ADRS      0x05
-#define PICTRL_ADRS     0x06
-#define POLCTRL_ADRS    0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA     0x01
-#define RESCTL_VGA      0x00
-
-#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
-#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
-#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE      0x01
-#define PICTRL_INIOFF          0x02
-#define PICTRL_POWER_DOWN      0x04
-#define PICTRL_COM_SIGNAL_OFF  0x08
-#define PICTRL_DAC_SIGNAL_OFF  0x10
-
-#define POLCTRL_SYNC_POL_FALL  0x01
-#define POLCTRL_EN_POL_FALL    0x02
-#define POLCTRL_DATA_POL_FALL  0x04
-#define POLCTRL_SYNC_ACT_H     0x08
-#define POLCTRL_EN_ACT_L       0x10
-
-#define POLCTRL_SYNC_POL_RISE  0x00
-#define POLCTRL_EN_POL_RISE    0x00
-#define POLCTRL_DATA_POL_RISE  0x00
-#define POLCTRL_SYNC_ACT_L     0x00
-#define POLCTRL_EN_ACT_H       0x00
-
-#define PHACTRL_PHASE_MANUAL   0x01
-#define DEFAULT_PHAD_QVGA     (9)
-#define DEFAULT_COMADJ        (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
-	udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
-	lcdtg_ssp_i2c_send(data);
-	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
-	lcdtg_ssp_i2c_send(base);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
-	int i;
-	for (i = 0; i < 8; i++) {
-		if (data & 0x80)
-			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
-		else
-			lcdtg_i2c_send_bit(base);
-		data <<= 1;
-	}
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
-	lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
-	/* Set Common Voltage to M62332FP via I2C */
-	lcdtg_i2c_send_start(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x9c);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x00);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, data);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
-	int adj;
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Setting for VGA */
-			adj = sharpsl_param.phadadj;
-			if (adj < 0) {
-				adj = PHACTRL_PHASE_MANUAL;
-			} else {
-				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
-			}
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Setting for QVGA */
-			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
-			break;
-	}
-
-	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
-	if (!lcd_inited) {
-		int comadj;
-
-		/* Initialize Internal Logic & Port */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
-	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-		/* VDD(+8V), SVSS(-4V) ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-		mdelay(3);
-
-		/* DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		/* INIB = H, INI = L  */
-		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
-		/* Set Common Voltage */
-		comadj = sharpsl_param.comadj;
-		if (comadj < 0)
-			comadj = DEFAULT_COMADJ;
-		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
-		/* VCC5 ON, DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
-				POWER0_COM_OFF | POWER0_VCC5_ON);
-
-		/* GVSS(-8V) ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-		mdelay(2);
-
-		/* COM SIGNAL ON (PICTL[3] = L) */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
-		/* COM ON, DAC ON, VCC5_ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_ON | POWER0_VCC5_ON);
-
-		/* VW ON, GVSS ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-		/* Signals output enable */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
-		/* Set Phase Adjust */
-		lcdtg_set_phadadj(mode);
-
-		/* Initialize for Input Signals from ATI */
-		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
-				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
-		udelay(1000);
-
-		lcd_inited=1;
-	} else {
-		lcdtg_set_phadadj(mode);
-	}
-
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Set Lcd Resolution (VGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Set Lcd Resolution (QVGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
-			break;
-	}
-}
-
-void corgi_lcdtg_suspend(void)
-{
-	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
-	mdelay(34);
-
-	/* (1)VW OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-	/* (2)COM OFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
-	/* (3)Set Common Voltage Bias 0V */
-	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
-	/* (4)GVSS OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
-	/* (5)VCC5 OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (6)Set PDWN, INIOFF, DACOFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
-			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
-	/* (7)DAC OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (8)VDD OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-	lcd_inited = 0;
-}
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 35bbfccd2df3..eb7d6c94aa42 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
 
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
deleted file mode 100644
index 8e2f2215c4ba..000000000000
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  SSP control code for Sharp Corgi devices
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- *   1. A touchscreen controller (TI ADS7846 compatible)
- *   2. An LCD controller (with some Backlight functionality)
- *   3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- *  ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
-	unsigned long flag;
-	u32 ret = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
-	ssp_write_word(&corgi_ssp_dev,data);
- 	ssp_read_word(&corgi_ssp_dev, &ret);
-
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
-	spin_lock(&corgi_ssp_lock);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
-	ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
-	u32 ret = 0;
-	ssp_read_word(&corgi_ssp_dev, &ret);
-	return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- *  LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
-	unsigned long flag, sscr1 = SSCR1_SPH;
-	u32 tmp;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-
-	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
-		sscr1 = 0;
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
-	ssp_enable(&corgi_ssp_dev);
-
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-	ssp_write_word(&corgi_ssp_dev,data);
-	/* Read null data back from device to prevent SSP overflow */
-	ssp_read_word(&corgi_ssp_dev, &tmp);
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
-	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
-	corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- *  Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
-	unsigned long flag;
-	long voltage = 0, voltage1 = 0, voltage2 = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
-	ssp_enable(&corgi_ssp_dev);
-
-	udelay(1);
-
-	/* TB1/RB1 */
-	ssp_write_word(&corgi_ssp_dev,data);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
-	/* TB12/RB2 */
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
-	/* TB13/RB3*/
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	if (voltage1 & 0xc0 || voltage2 & 0x3f)
-		voltage = -1;
-	else
-		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
-	return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- *  Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
-	ssp_machinfo = machinfo;
-}
-
-static int __init corgi_ssp_probe(struct platform_device *dev)
-{
-	int ret;
-
-	/* Chip Select - Disable All */
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_max1111 >= 0)
-	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
-	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
-	if (ret)
-		printk(KERN_ERR "Unable to register SSP handler!\n");
-	else {
-		ssp_disable(&corgi_ssp_dev);
-		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-		ssp_enable(&corgi_ssp_dev);
-	}
-
-	return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
-	ssp_exit(&corgi_ssp_dev);
-	return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
-	ssp_flush(&corgi_ssp_dev);
-	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
-	return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-	ssp_enable(&corgi_ssp_dev);
-
-	return 0;
-}
-
-static struct platform_driver corgissp_driver = {
-	.probe		= corgi_ssp_probe,
-	.remove		= corgi_ssp_remove,
-	.suspend	= corgi_ssp_suspend,
-	.resume		= corgi_ssp_resume,
-	.driver		= {
-		.name	= "corgi-ssp",
-	},
-};
-
-int __init corgi_ssp_init(void)
-{
-	return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 6f5569bac131..1f272ea83f36 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-pxa/cpu-pxa.c
+ *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
  *
  *  Copyright (C) 2002,2003 Intrinsyc Software
  *
@@ -335,9 +335,6 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 		pxa27x_guess_max_freq();
 
 	/* set default policy and cpuinfo */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	if (cpu_is_pxa25x())
-		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
 	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
 	policy->min = policy->max = policy->cur;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
new file mode 100644
index 000000000000..968c8309ec37
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -0,0 +1,257 @@
+/*
+ * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+
+#define HSS_104M	(0)
+#define HSS_156M	(1)
+#define HSS_208M	(2)
+#define HSS_312M	(3)
+
+#define SMCFS_78M	(0)
+#define SMCFS_104M	(2)
+#define SMCFS_208M	(5)
+
+#define SFLFS_104M	(0)
+#define SFLFS_156M	(1)
+#define SFLFS_208M	(2)
+#define SFLFS_312M	(3)
+
+#define XSPCLK_156M	(0)
+#define XSPCLK_NONE	(3)
+
+#define DMCFS_26M	(0)
+#define DMCFS_260M	(3)
+
+struct pxa3xx_freq_info {
+	unsigned int cpufreq_mhz;
+	unsigned int core_xl : 5;
+	unsigned int core_xn : 3;
+	unsigned int hss : 2;
+	unsigned int dmcfs : 2;
+	unsigned int smcfs : 3;
+	unsigned int sflfs : 2;
+	unsigned int df_clkdiv : 3;
+
+	int	vcc_core;	/* in mV */
+	int	vcc_sram;	/* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{									\
+	.cpufreq_mhz	= cpufreq,					\
+	.core_xl	= _xl,						\
+	.core_xn	= _xn,						\
+	.hss		= HSS_##_hss##M,				\
+	.dmcfs		= DMCFS_##_dmc##M,				\
+	.smcfs		= SMCFS_##_smc##M,				\
+	.sflfs		= SFLFS_##_sfl##M,				\
+	.df_clkdiv	= _dfi,						\
+	.vcc_core	= vcore,					\
+	.vcc_sram	= vsram,					\
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+			     struct pxa3xx_freq_info *freqs, int num)
+{
+	struct cpufreq_frequency_table *table;
+	int i;
+
+	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+	if (table == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		table[i].index = i;
+		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+	}
+	table[num].frequency = i;
+	table[num].frequency = CPUFREQ_TABLE_END;
+
+	pxa3xx_freqs = freqs;
+	pxa3xx_freqs_num = num;
+	pxa3xx_freqs_table = table;
+
+	return cpufreq_frequency_table_cpuinfo(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+	uint32_t accr = ACCR;
+	uint32_t xclkcfg;
+
+	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+	/* No clock until core PLL is re-locked */
+	accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
+
+	ACCR = accr;
+	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask;
+	uint32_t accr = ACCR;
+
+	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+		ACCR_DMCFS_MASK;
+
+	accr &= ~mask;
+	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+	ACCR = accr;
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pxa3xx_freq_info *next;
+	struct cpufreq_freqs freqs;
+	unsigned long flags;
+	int idx;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
+				target_freq, relation, &idx))
+		return -EINVAL;
+
+	next = &pxa3xx_freqs[idx];
+
+	freqs.old = policy->cur;
+	freqs.new = next->cpufreq_mhz * 1000;
+	freqs.cpu = policy->cpu;
+
+	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
+			freqs.old / 1000, freqs.new / 1000,
+			(freqs.old == freqs.new) ? " (skipped)" : "");
+
+	if (freqs.old == target_freq)
+		return 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	local_irq_save(flags);
+	__update_core_freq(next);
+	__update_bus_freq(next);
+	local_irq_restore(flags);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret = -EINVAL;
+
+	/* set default policy and cpuinfo */
+	policy->cpuinfo.min_freq = 104000;
+	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
+
+	if (cpu_is_pxa320())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
+
+	if (ret) {
+		pr_err("failed to setup frequency table\n");
+		return ret;
+	}
+
+	pr_info("CPUFREQ support for PXA3xx initialized\n");
+	return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+	.verify		= pxa3xx_cpufreq_verify,
+	.target		= pxa3xx_cpufreq_set,
+	.init		= pxa3xx_cpufreq_init,
+	.get		= pxa3xx_cpufreq_get,
+	.name		= "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+	if (cpu_is_pxa3xx())
+		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+	return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 887c738f5911..bb04af4b0aa3 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -32,5 +32,6 @@ extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
 extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
new file mode 100644
index 000000000000..d488eded2058
--- /dev/null
+++ b/arch/arm/mach-pxa/e330.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e330_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
new file mode 100644
index 000000000000..8ecbc5479828
--- /dev/null
+++ b/arch/arm/mach-pxa/e350.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e350_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
new file mode 100644
index 000000000000..544bbaa20621
--- /dev/null
+++ b/arch/arm/mach-pxa/e400.c
@@ -0,0 +1,94 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include <mach/pxafb.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
deleted file mode 100644
index 263884165f57..000000000000
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * e400_lcd.c
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxafb.h>
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-static int __init e400_lcd_init(void)
-{
-	if (!machine_is_e400())
-		return -ENODEV;
-
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	return 0;
-}
-
-module_init(e400_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e400 lcd driver");
-MODULE_LICENSE("GPLv2");
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
new file mode 100644
index 000000000000..c57a15b37f0d
--- /dev/null
+++ b/arch/arm/mach-pxa/e740.c
@@ -0,0 +1,169 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e740_fb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
deleted file mode 100644
index 26bd599af178..000000000000
--- a/arch/arm/mach-pxa/e740_lcd.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* e740_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-/*
-**potential** shutdown routine - to be investigated
-devmem2 0x0c010528 w 0xff3fff00
-devmem2 0x0c010190 w 0x7FFF8000
-devmem2 0x0c0101b0 w 0x00FF0000
-devmem2 0x0c01008c w 0x00000000
-devmem2 0x0c010080 w 0x000000bf
-devmem2 0x0c010098 w 0x00000015
-devmem2 0x0c010088 w 0x4b000204
-devmem2 0x0c010098 w 0x0000001d
-*/
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-static int e740_lcd_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	return platform_device_register(&e740_fb_device);
-}
-
-module_init(e740_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e740 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750.c
index 75edc3b5390f..640e738b85df 100644
--- a/arch/arm/mach-pxa/e750_lcd.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -1,25 +1,35 @@
-/* e750_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
  *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
  *
  */
 
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
 #include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
 
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ---------------------- E750 LCD definitions -------------------- */
 
 static struct w100_gen_regs e750_lcd_regs = {
 	.lcd_format =            0x00008003,
@@ -54,7 +64,6 @@ static struct w100_mode e750_lcd_mode = {
 	.sysclk_src     = CLK_SRC_PLL,
 };
 
-
 static struct w100_gpio_regs e750_w100_gpio_info = {
 	.init_data1 = 0x01192f1b,
 	.gpio_dir1  = 0xd5ffdeff,
@@ -81,9 +90,6 @@ static struct resource e750_fb_resources[] = {
 	},
 };
 
-/* ----------------------- device declarations -------------------------- */
-
-
 static struct platform_device e750_fb_device = {
 	.name           = "w100fb",
 	.id             = -1,
@@ -94,16 +100,27 @@ static struct platform_device e750_fb_device = {
 	.resource       = e750_fb_resources,
 };
 
-static int e750_lcd_init(void)
-{
-	if (!machine_is_e750())
-		return -ENODEV;
+/* ----------------------------------------------------------------------- */
 
-	return platform_device_register(&e750_fb_device);
+static struct platform_device *devices[] __initdata = {
+	&e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
-module_init(e750_lcd_init);
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
 
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e750 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800.c
index e6aeab0ebc22..a293e09bfe25 100644
--- a/arch/arm/mach-pxa/e800_lcd.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -1,25 +1,36 @@
-/* e800_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
  *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
  *
  */
 
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
 #include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
 
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ e800 LCD definitions ------------------------- */
 
 static struct w100_gen_regs e800_lcd_regs = {
 	.lcd_format =            0x00008003,
@@ -71,8 +82,8 @@ static struct w100_mode e800_lcd_mode[2] = {
 		.crtc_goe        = 0x80cc0015,
 		.crtc_ps1_active = 0x00000000,
 		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
-		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
 		.pixclk_src     = CLK_SRC_PLL,
 		.sysclk_divider  = 0,
 		.sysclk_src     = CLK_SRC_PLL,
@@ -131,9 +142,6 @@ static struct resource e800_fb_resources[] = {
 	},
 };
 
-/* ----------------------- device declarations -------------------------- */
-
-
 static struct platform_device e800_fb_device = {
 	.name           = "w100fb",
 	.id             = -1,
@@ -144,16 +152,35 @@ static struct platform_device e800_fb_device = {
 	.resource       = e800_fb_resources,
 };
 
-static int e800_lcd_init(void)
-{
-	if (!machine_is_e800())
-		return -ENODEV;
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
 
-	return platform_device_register(&e800_fb_device);
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
 }
 
-module_init(e800_lcd_init);
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
 
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e800 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 7a0a681a5847..f5ed8038ede5 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -373,10 +373,6 @@ static inline void em_x270_init_nand(void) {}
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
@@ -385,6 +381,7 @@ static int em_x270_ohci_init(struct device *dev)
 
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
 };
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 001a252bd514..d28849b50a14 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -19,68 +19,13 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
 /* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
+void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
@@ -92,95 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-}
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-}
-
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.timer		= &pxa_timer,
-MACHINE_END
-#endif
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
 
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
new file mode 100644
index 000000000000..a83f88d4b6ad
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.h
@@ -0,0 +1,4 @@
+void __init eseries_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi);
+
+extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
deleted file mode 100644
index d622c04c0d44..000000000000
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * UDC functions for the Toshiba e-series PDAs
- *
- * Copyright (c) Ian Molton 2003
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <mach/udc.h>
-#include <mach/eseries-gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/domain.h>
-
-/* local PXA generic code */
-#include "generic.h"
-
-static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
-	.gpio_vbus   = GPIO_E7XX_USB_DISC,
-	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static int __init eseries_udc_init(void)
-{
-	if (machine_is_e330() || machine_is_e350() ||
-	    machine_is_e740() || machine_is_e750() ||
-	    machine_is_e400())
-		pxa_set_udc_info(&e7xx_udc_mach_info);
-	else if (machine_is_e800())
-		pxa_set_udc_info(&e800_udc_mach_info);
-
-	return 0;
-}
-
-module_init(eseries_udc_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("eseries UDC support");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ceaed0076366..85ed0b33331f 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -46,7 +46,7 @@ void clear_reset_status(unsigned int mask)
  */
 unsigned int get_clk_frequency_khz(int info)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
@@ -60,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
  */
 unsigned int get_memclk_frequency_10khz(void)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
@@ -88,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(0x48000000),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
-	}, {	/* USB host */
-		.virtual	=  0xf8000000,
-		.pfn		= __phys_to_pfn(0x4c000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}, {	/* Camera */
 		.virtual	=  0xfa000000,
 		.pfn		= __phys_to_pfn(0x50000000),
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 041c048320e4..dc876a8e6668 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -65,4 +65,5 @@ static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 
 extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 07acc1b23857..14930cf8be7b 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -16,10 +16,10 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <asm/gpio.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
@@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 			loop = 1;
 
 			n = PXA_GPIO_IRQ_BASE + bit;
-			desc_handle_irq(n, irq_desc + n);
+			generic_handle_irq(n);
 
 			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
 		}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c0092472fa58..d8962a0fb98d 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,8 +20,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -40,7 +44,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 
 #include "generic.h"
 
@@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = {
 };
 
 #ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data;
-
-static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
-				void *data)
-{
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO53_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data gumstix_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= gumstix_mci_init,
 };
 
 static void __init gumstix_mmc_init(void)
@@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void)
 #else
 static void __init gumstix_mmc_init(void)
 {
-	printk(KERN_INFO "Gumstix mmc disabled\n");
+	pr_debug("Gumstix mmc disabled\n");
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
 static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
@@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void)
 #else
 static void gumstix_udc_init(void)
 {
-	printk(KERN_INFO "Gumstix udc is disabled\n");
+	pr_debug("Gumstix udc is disabled\n");
 }
 #endif
 
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+	int timeout = 500;
+
+	if (!(OSCC & OSCC_OOK))
+		pr_warning("32kHz clock was not on. Bootloader may need to "
+				"be updated\n");
+	else
+		return;
+
+	OSCC |= OSCC_OON;
+	do {
+		if (OSCC & OSCC_OOK)
+			break;
+		udelay(1);
+	} while (--timeout);
+	if (!timeout)
+		pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+	int err;
+
+	gumstix_setup_bt_clock();
+
+	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+	if (err) {
+		pr_err("gumstix: failed request gpio for bluetooth reset\n");
+		return;
+	}
+
+	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+	if (err) {
+		pr_err("gumstix: can't reset bluetooth\n");
+		return;
+	}
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+	udelay(100);
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+	pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+	GPIO12_32KHz,
+	/* BTUART */
+	GPIO42_HWUART_RXD,
+	GPIO43_HWUART_TXD,
+	GPIO44_HWUART_CTS,
+	GPIO45_HWUART_RTS,
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO53_MMC_CLK,
+	GPIO8_MMC_CS0,
+	/* these are used by AM200EPD */
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
 static void __init gumstix_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5aa0270d5605..013b15baa034 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/idp.h>
 #include <mach/pxafb.h>
 #include <mach/bitfield.h>
@@ -46,6 +46,47 @@
  * - Ethernet interrupt
  */
 
+static unsigned long idp_pin_config[] __initdata = {
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* Ethernet */
+	GPIO33_nCS_5,	/* Ethernet CS */
+	GPIO4_GPIO,	/* Ethernet IRQ */
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (IDP_ETH_PHYS + 0x300),
@@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 	.num_modes      = 1,
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
-	.lccr0		= LCCR0_SDS,
-	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(255),
 	.pxafb_backlight_power = &idp_backlight_power,
 	.pxafb_lcd_power = &idp_lcd_power
 };
 
-static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
-{
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data idp_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= idp_mci_init,
 };
 
 static void __init idp_init(void)
 {
 	printk("idp_init()\n");
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
-static void __init idp_init_irq(void)
-{
-
-	pxa25x_init_irq();
-
-	set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
-}
-
 static struct map_desc idp_io_desc[] __initdata = {
   	{
 		.virtual	=  IDP_COREVOLT_VIRT,
@@ -177,15 +202,6 @@ static void __init idp_map_io(void)
 {
 	pxa_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-
-	// serial ports 2 & 3
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
-
 }
 
 
@@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= idp_map_io,
-	.init_irq	= idp_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
deleted file mode 100644
index 5d8cc1d9cb10..000000000000
--- a/arch/arm/mach-pxa/include/mach/akita.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardware specific definitions for SL-C1000 (Akita)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/* Akita IO Expander GPIOs */
-
-#define AKITA_IOEXP_RESERVED_7      (1 << 7)
-#define AKITA_IOEXP_IR_ON           (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
-#define AKITA_IOEXP_RESERVED_1      (1 << 1)
-#define AKITA_IOEXP_RESERVED_0      (1 << 0)
-
-/* Direction Bitfield  0=output  1=input */
-#define AKITA_IOEXP_IO_DIR	0
-/* Default Values */
-#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
-
-extern struct platform_device akitaioexp_device;
-
-void akita_set_ioexp(struct device *dev, unsigned char bitmask);
-void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
-
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 39516ced8b1f..31abe6d514b8 100644
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -36,8 +36,6 @@
 
 struct pxacamera_platform_data {
 	int (*init)(struct device *);
-	int (*power)(struct device *, int);
-	int (*reset)(struct device *, int);
 
 	unsigned long flags;
 	unsigned long mclk_10khz;
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf856503baf6..585970ef08ce 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -98,12 +98,21 @@
 			CORGI_SCP_MIC_BIAS )
 #define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
 
+#define CORGI_SCOOP_GPIO_BASE		(NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
+#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
 
 /*
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index de16c12d5232..f6b4bf3e73d2 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
 		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #32
+		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
 		b	1001f
 1003:
 		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
@@ -52,6 +52,6 @@
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
+		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e89df4d0d239..a582a6d9b92b 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -62,26 +62,74 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/cputype.h>
+
+/*
+ *   CPU     Stepping     CPU_ID         JTAG_ID
+ *
+ *  PXA210	B0	0x69052922	0x2926C013
+ *  PXA210	B1	0x69052923	0x3926C013
+ *  PXA210	B2	0x69052924	0x4926C013
+ *  PXA210	C0	0x69052D25	0x5926C013
+ *
+ *  PXA250	A0	0x69052100	0x09264013
+ *  PXA250	A1	0x69052101	0x19264013
+ *  PXA250	B0	0x69052902	0x29264013
+ *  PXA250	B1	0x69052903	0x39264013
+ *  PXA250	B2	0x69052904	0x49264013
+ *  PXA250	C0	0x69052D05	0x59264013
+ *
+ *  PXA255	A0	0x69052D06	0x69264013
+ *
+ *  PXA26x	A0	0x69052903	0x39264013
+ *  PXA26x	B0	0x69052D05	0x59264013
+ *
+ *  PXA27x	A0	0x69054110	0x09265013
+ *  PXA27x	A1	0x69054111	0x19265013
+ *  PXA27x	B0	0x69054112	0x29265013
+ *  PXA27x	B1	0x69054113	0x39265013
+ *  PXA27x	C0	0x69054114	0x49265013
+ *  PXA27x	C5	0x69054117	0x79265013
+ *
+ *  PXA30x	A0	0x69056880	0x0E648013
+ *  PXA30x	A1	0x69056881	0x1E648013
+ *  PXA31x	A0	0x69056890	0x0E649013
+ *  PXA31x	A1	0x69056891	0x1E649013
+ *  PXA31x	A2	0x69056892	0x2E649013
+ *  PXA32x	B1	0x69056825	0x5E642013
+ *  PXA32x	B2	0x69056826	0x6E642013
+ *
+ *  PXA930	B0	0x69056835	0x5E643013
+ *  PXA930	B1	0x69056837	0x7E643013
+ *  PXA930	B2	0x69056838	0x8E643013
+ */
 #ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id)				\
+#define __cpu_is_pxa210(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xf3f;	\
-		_id == 0x212;				\
+		unsigned int _id = (id) & 0xf3f0;	\
+		_id == 0x2120;				\
 	})
 
-#define __cpu_is_pxa255(id)                             \
-	({                                              \
-		unsigned int _id = (id) >> 4 & 0xfff;   \
-		_id == 0x2d0;                           \
-	 })
+#define __cpu_is_pxa250(id)				\
+	({						\
+		unsigned int _id = (id) & 0xf3ff;	\
+		_id <= 0x2105;				\
+	})
+
+#define __cpu_is_pxa255(id)				\
+	({						\
+		unsigned int _id = (id) & 0xffff;	\
+		_id == 0x2d06;				\
+	})
 
 #define __cpu_is_pxa25x(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x2d0 || _id == 0x290;		\
+		unsigned int _id = (id) & 0xf300;	\
+		_id == 0x2100;				\
 	})
 #else
-#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa210(id)	(0)
+#define __cpu_is_pxa250(id)	(0)
 #define __cpu_is_pxa255(id)	(0)
 #define __cpu_is_pxa25x(id)	(0)
 #endif
@@ -136,9 +184,14 @@
 #define __cpu_is_pxa930(id)	(0)
 #endif
 
-#define cpu_is_pxa21x()					\
+#define cpu_is_pxa210()					\
 	({						\
-		__cpu_is_pxa21x(read_cpuid_id());	\
+		__cpu_is_pxa210(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa250()					\
+	({						\
+		__cpu_is_pxa250(read_cpuid_id());	\
 	})
 
 #define cpu_is_pxa255()                                 \
@@ -151,6 +204,8 @@
 		__cpu_is_pxa25x(read_cpuid_id());	\
 	})
 
+extern int cpu_is_pxa26x(void);
+
 #define cpu_is_pxa27x()					\
 	({						\
 		__cpu_is_pxa27x(read_cpuid_id());	\
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b013443..1a9f65e6ec0f 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -65,13 +65,18 @@ struct i2c_pxa_platform_data {
 	unsigned int		slave_addr;
 	struct i2c_slave_client	*slave;
 	unsigned int		class;
-	int			use_pio;
+	unsigned int		use_pio :1;
+	unsigned int		fast_mode :1;
 };
 
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
 
 #ifdef CONFIG_PXA27x
-extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 108b5db9b2af..9c163e19ada9 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -11,7 +11,14 @@
  */
 
 
-#define PXA_IRQ(x)	(x)
+#ifdef CONFIG_PXA_HAVE_ISA_IRQS
+#define PXA_ISA_IRQ(x)	(x)
+#define PXA_ISA_IRQ_NUM	(16)
+#else
+#define PXA_ISA_IRQ_NUM	(0)
+#endif
+
+#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
@@ -73,7 +80,7 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
 #define PXA_GPIO_IRQ_NUM	(128)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
@@ -178,13 +185,7 @@
 #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
-      defined(CONFIG_MACH_LOGICPD_PXA270) || \
-      defined(CONFIG_MACH_TOSA) || \
-      defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027) || \
-      defined(CONFIG_ARCH_PXA_ESERIES) || \
-      defined(CONFIG_MACH_MAGICIAN)
+#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define NR_IRQS			(IRQ_BOARD_START + 32)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b826f4..5c4e320c1437 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -3,4 +3,6 @@
 
 #define LITTLETON_ETH_PHYS	0x30000000
 
+#define LITTLETON_GPIO_LCD_CS	(17)
+
 #endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 552eb7fa6579..59aef89808d6 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -40,11 +40,11 @@
 #define NODE_MEM_SIZE_BITS	26
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 			     unsigned long *holes);
 
 #define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
+	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 6c8e72238bfd..617cab2cc8d0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -17,7 +17,7 @@
 
 /* Crystal and Clock Signals */
 #define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
 #define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
 #define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
 #define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
@@ -156,6 +156,6 @@
 #define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
 #define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 74990510cf34..67f8385ea548 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -257,10 +257,10 @@
 #define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
 #define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
 
-#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
 #define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
 #define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
 #define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 8769567b389b..482185053a92 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -274,12 +274,13 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_DS_MASK		(0x7 << 13)
 #define MFP_DS(x)		(((x) >> 13) & 0x7)
 
-#define MFP_LPM_INPUT		(0x0 << 16)
+#define MFP_LPM_DEFAULT		(0x0 << 16)
 #define MFP_LPM_DRIVE_LOW	(0x1 << 16)
 #define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
 #define MFP_LPM_PULL_LOW	(0x3 << 16)
 #define MFP_LPM_PULL_HIGH	(0x4 << 16)
 #define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
 #define MFP_LPM_STATE_MASK	(0x7 << 16)
 #define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
 
@@ -297,7 +298,7 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_PULL_MASK		(0x3 << 21)
 #define MFP_PULL(x)		(((x) >> 21) & 0x3)
 
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
 
 #define MFP_CFG(pin, af)		\
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
new file mode 100644
index 000000000000..8483cb511831
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -0,0 +1,67 @@
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN			9
+#define GPIO18_POWEROFF				18
+#define GPIO87_LCD_POWER			87
+
+/* USB */
+#define GPIO13_USB_DETECT			13
+#define GPIO22_USB_ENABLE			22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO				78
+#define GPIO15_SDIO_INSERT			15
+#define GPIO91_SDIO_EN				91
+
+/* Bluetooth */
+#define GPIO83_BT_ON				83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1			23
+#define GPIO26_GPS_ON				26
+#define GPIO27_GPS_RESET			27
+#define GPIO106_GPS_UNKNOWN2			106
+#define GPIO107_GPS_UNKNOWN3			107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD		24
+#define GPIO88_GSM_nMOD_ON_CMD			88
+#define GPIO90_GSM_nMOD_OFF_CMD			90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
+#define GPIO25_GSM_MOD_ON_STATE			25
+#define GPIO113_GSM_EVENT			113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT			12
+
+/* LEDS */
+#define GPIO10_LED_nCharging			10
+#define GPIO97_LED_nBlue			97
+#define GPIO98_LED_nOrange			98
+#define GPIO82_LED_nVibra			82
+#define GPIO115_LED_nKeyboard			115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER				0
+#define GPIO93_KEY_VOLUME_UP			93
+#define GPIO94_KEY_VOLUME_DOWN			94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47128cd..95b6e2a6e514 100644
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -7,6 +7,22 @@ struct pxaohci_platform_data {
 	int (*init)(struct device *);
 	void (*exit)(struct device *);
 
+	unsigned long flags;
+#define ENABLE_PORT1		(1 << 0)
+#define ENABLE_PORT2		(1 << 1)
+#define ENABLE_PORT3		(1 << 2)
+#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW		(1 << 3)
+#define POWER_CONTROL_LOW	(1 << 4)
+#define NO_OC_PROTECTION	(1 << 5)
+#define OC_MODE_GLOBAL		(0 << 6)
+#define OC_MODE_PERPORT		(1 << 6)
+
+	int power_on_delay;	/* Power On to Power Good time - in ms
+				 * HCD must wait for this duration before
+				 * accessing a powered on port
+				 */
 	int port_mode;
 #define PMM_NPS_MODE           1
 #define PMM_GLOBAL_MODE        2
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 000000000000..5032307ebf7d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,80 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET		1
+#define GPIO_NR_PALMZ72_POWER_DETECT		0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N		14
+#define GPIO_NR_PALMZ72_SD_POWER_N		98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE		49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N		15
+#define GPIO_NR_PALMZ72_USB_POWER		95
+#define GPIO_NR_PALMZ72_USB_PULLUP		12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER		20
+#define GPIO_NR_PALMZ72_LCD_POWER		96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN		88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER		17
+#define GPIO_NR_PALMZ72_BT_RESET		83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY		0xFE
+#define PALMZ72_DEFAULT_INTENSITY	0x7E
+#define PALMZ72_LIMIT_MASK		0x7F
+#define PALMZ72_PRESCALER		0x3F
+#define PALMZ72_PERIOD_NS		3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+	u32 magic0;		/* 0x0 */
+	u32 magic1;		/* 0x4 */
+	u32 resume_addr;	/* 0x8 */
+	u32 pad[11];		/* 0xc..0x37 */
+	u32 arm_control;	/* 0x38 */
+	u32 aux_control;	/* 0x3c */
+	u32 ttb;		/* 0x40 */
+	u32 domain_access;	/* 0x44 */
+	u32 process_id;		/* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc958db..83342469acac 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -15,6 +15,8 @@ struct pxa_cpu_pm_fns {
 	void	(*restore)(unsigned long *);
 	int	(*valid)(suspend_state_t state);
 	void	(*enter)(suspend_state_t state);
+	int	(*prepare)(void);
+	void	(*finish)(void);
 };
 
 extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 67debc47e8c6..0b3e6d051c64 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -23,6 +23,7 @@
 #define POODLE_GPIO_AC_IN		(1)
 #define POODLE_GPIO_CO			16
 #define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_TP_CS		(24)
 #define POODLE_GPIO_WAKEUP		(11)	/* change battery */
 #define POODLE_GPIO_GA_INT		(10)
 #define POODLE_GPIO_IR_ON		(22)
@@ -70,6 +71,14 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
+#define POODLE_SCOOP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
+
 #define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
 #define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
 #define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 12288ca3cbb2..15295d960000 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -69,30 +69,18 @@
 /*
  * DMA Controller
  */
-
-#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-
 #define DCSR(x)		__REG2(0x40000000, (x) << 2)
 
 #define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
 #define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
 #define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
 #define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
 #define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
@@ -101,11 +89,6 @@
 #define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
 #define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
 #endif
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
 
 #define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
 #define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
@@ -114,145 +97,9 @@
 			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
 			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
 
-#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23		__REG(0x4000015c)  /* Reserved */
-#define DRCMR24		__REG(0x40000160)  /* Reserved */
-#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29		__REG(0x40000174)  /* Reserved */
-#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34		__REG(0x40000188)  /* Reserved */
-#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39		__REG(0x4000019C)  /* Reserved */
-#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR	DRCMR2
-#define DRCMRTXSADR	DRCMR3
-#define DRCMRRXBTRBR	DRCMR4
-#define DRCMRTXBTTHR	DRCMR5
-#define DRCMRRXFFRBR	DRCMR6
-#define DRCMRTXFFTHR	DRCMR7
-#define DRCMRRXMCDR	DRCMR8
-#define DRCMRRXMODR	DRCMR9
-#define DRCMRTXMODR	DRCMR10
-#define DRCMRRXPCDR	DRCMR11
-#define DRCMRTXPCDR	DRCMR12
-#define DRCMRRXSSDR	DRCMR13
-#define DRCMRTXSSDR	DRCMR14
-#define DRCMRRXSS2DR   DRCMR15
-#define DRCMRTXSS2DR   DRCMR16
-#define DRCMRRXICDR	DRCMR17
-#define DRCMRTXICDR	DRCMR18
-#define DRCMRRXSTRBR	DRCMR19
-#define DRCMRTXSTTHR	DRCMR20
-#define DRCMRRXMMC	DRCMR21
-#define DRCMRTXMMC	DRCMR22
-#define DRCMRRXSS3DR   DRCMR66
-#define DRCMRTXSS3DR   DRCMR67
-#define DRCMRUDC(x)	DRCMR((x) + 24)
-
 #define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
 #define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
 
-#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
-#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
-#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
-#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
-#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
-#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
-#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
-#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
-#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
-#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
-#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
-#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
-#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
-#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
-#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
-#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
-#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
-#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
-#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
-#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
-#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
-#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
-#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
-#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
-#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
-#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
-#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
-#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
-#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
-#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
-#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
-#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
-#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-
 #define DDADR(x)	__REG2(0x40000200, (x) << 4)
 #define DSADR(x)	__REG2(0x40000204, (x) << 4)
 #define DTADR(x)	__REG2(0x40000208, (x) << 4)
@@ -418,91 +265,13 @@
 
 
 /*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
  */
 
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-
 /*
- * Serial Audio Controller
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
  */
 
-#define SACR0		__REG(0x40400000)  /* Global Control Register */
-#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
-#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
-#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
-#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
-#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
-#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
-#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
-#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
-#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
-#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
-#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
-
-#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
-#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
-#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
-#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
-#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
-#define SASR0_BSY	(1 << 2)	/* I2S Busy */
-#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
-#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
-
-#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
-
 /*
  * AC97 Controller registers
  */
@@ -989,77 +758,6 @@
 
 #endif
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS	(0x4C000000)
-#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
-
-#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
-#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
-#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
-#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
-
-#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
-#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
-#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
-#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
-#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
-#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
-#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
-#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
-
-#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
-#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
-					   Interrupt Enable*/
-#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
-
-#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
 /* PWRMODE register M field values */
 
 #define PWRMODE_IDLE		0x1
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 39eb68319e28..b1fcd10ab6c6 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,28 @@
 #define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
 #define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
 
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
 /*
  * Clock Enable Bit
  */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 9489a48871a8..7b8842cfa5fc 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -10,9 +10,12 @@
 extern unsigned int reset_status;
 extern void clear_reset_status(unsigned int mask);
 
-/*
- * register GPIO as reset generator
+/**
+ * init_gpio_reset() - register GPIO as reset generator
+ *
+ * @gpio - gpio nr
+ * @output - set gpio as out/low instead of input during normal work
  */
-extern int init_gpio_reset(int gpio);
+extern int init_gpio_reset(int gpio, int output);
 
 #endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365f7ed5..31ac26b55bc1 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -16,6 +16,7 @@
 #endif
 
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 /* Spitz/Akita GPIOs */
 
@@ -100,13 +101,24 @@
 #define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
 #define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
 
-#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
                                SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
 #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_SUS_SET     0
 
+#define SPITZ_SCP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L	(SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R	(SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER	(SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE	(SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A		(SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON	(SPITZ_SCP_GPIO_BASE + 8)
+
 /* Spitz Scoop Device (No. 2) GPIOs */
 /* Suspend States in comments */
 #define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
@@ -119,15 +131,36 @@
 #define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
 #define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
 
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
                            SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
                            SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 
-#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
 #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
                              SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
 
+#define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4		(SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT	(SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON		(SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON		(AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT	(AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP		(AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON		(AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7		(AKITA_IOEXP_GPIO_BASE + 7)
 
 /* Spitz IRQ Definitions */
 
@@ -154,5 +187,4 @@
  */
 extern struct platform_device spitzscoop_device;
 extern struct platform_device spitzscoop2_device;
-extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882c9ee6..cb5cb766f0f1 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -20,6 +20,7 @@
 #define __ASM_ARCH_SSP_H
 
 #include <linux/list.h>
+#include <linux/io.h>
 
 enum pxa_ssp_type {
 	SSP_UNDEFINED = 0,
@@ -78,6 +79,29 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);
 
+/**
+ * ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
 struct ssp_device *ssp_request(int port, const char *label);
 void ssp_free(struct ssp_device *);
 #endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec110bb..903e1a2e6641 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -17,11 +17,16 @@
 #define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
 #define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
+				/* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
+				/* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
+				/* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
+				/* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
+				/* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
 
 /* virtual memory regions */
 #define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
@@ -54,6 +59,15 @@
 #define GPIO_MMC_DET		12
 #define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
 
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK           94
+#define GPIO_DOC_IRQ            93
+#define TRIZEPS4_DOC_IRQ        IRQ_GPIO(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI                53
+#define TRIZEPS4_SPI_IRQ        IRQ_GPIO(GPIO_SPI)
+
 /* LEDS using tx2 / rx2 */
 #define GPIO_SYS_BUSY_LED	46
 #define GPIO_HEARTBEAT_LED	47
@@ -62,24 +76,66 @@
 #define GPIO_PIC		0
 #define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
 
-#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
 
-#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
 
-#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
 
 #ifndef __ASSEMBLY__
-#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
-#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
-#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+static inline unsigned short CFSR_readw(void)
+{
+	/* [Compact Flash Status Register] is read only */
+	return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+	/* [Board Control Regsiter] is write only */
+	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	/* [Display Control Register] is write only */
+	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	/* [InfraRed data Control Register] is write only */
+	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
 #else
 #define ConXS_CFSR		CFSR_P2V(0x0C000000)
 #define ConXS_BCR		BCR_P2V(0x0E000000)
 #define ConXS_DCR		DCR_P2V(0x0F800000)
+#define ConXS_IRCR		IRCR_P2V(0x0F800000)
 #endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+	return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+	;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	;
+}
+#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
 
 #define ConXS_CFSR_BVD_MASK	0x0003
 #define ConXS_CFSR_BVD1		(1 << 0)
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 000000000000..10988c270ca3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author:	Ian Campbell
+ * Created:	Feb 03, 2003
+ * Copyright:	Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *			      <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
+#define VIPER_ETH_PHYS		PXA_CS2_PHYS
+#define VIPER_USB_PHYS		PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE		(0xf0000000)
+#define VIPER_PC104IO_BASE	(0xf1000000)
+#define VIPER_USB_BASE		(0xf1800000)
+
+#define VIPER_ETH_GPIO		(0)
+#define VIPER_CPLD_GPIO		(1)
+#define VIPER_USB_GPIO		(2)
+#define VIPER_UARTA_GPIO	(4)
+#define VIPER_UARTB_GPIO	(3)
+#define VIPER_CF_CD_GPIO	(32)
+#define VIPER_CF_RDY_GPIO	(8)
+#define VIPER_BCKLIGHT_EN_GPIO	(9)
+#define VIPER_LCD_EN_GPIO	(10)
+#define VIPER_PSU_DATA_GPIO	(6)
+#define VIPER_PSU_CLK_GPIO	(11)
+#define VIPER_UART_SHDN_GPIO	(12)
+#define VIPER_BRIGHTNESS_GPIO	(16)
+#define VIPER_PSU_nCS_LD_GPIO	(19)
+#define VIPER_UPS_GPIO		(20)
+#define VIPER_CF_POWER_GPIO	(82)
+#define VIPER_TPM_I2C_SDA_GPIO	(26)
+#define VIPER_TPM_I2C_SCL_GPIO	(27)
+#define VIPER_RTC_I2C_SDA_GPIO	(83)
+#define VIPER_RTC_I2C_SCL_GPIO	(84)
+
+#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+extern void viper_cf_rst(int state);
+
+#define VIPER_ICR_RETRIG	(1 << 0)
+#define VIPER_ICR_AUTO_CLR	(1 << 1)
+#define VIPER_ICR_R_DIS		(1 << 2)
+#define VIPER_ICR_CF_RST	(1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5e95c5372fec..fa69c3a6a38e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 
 	pxa_internal_irq_nr = irq_nr;
 
-	for (irq = 0; irq < irq_nr; irq += 32) {
+	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
 		_ICMR(irq) = 0;	/* disable all IRQs */
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
deleted file mode 100644
index 3bc29007df3a..000000000000
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-trizeps4.c
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/types.h>
-#include <asm/leds.h>
-
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/trizeps4.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-#define SYS_BUSY		0x01
-#define HEARTBEAT		0x02
-#define BLINK			0x04
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void trizeps4_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-		pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= HEARTBEAT;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~SYS_BUSY;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= SYS_BUSY;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= BLINK;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~BLINK;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		break;
-
-	case led_red_off:
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED) {
-		switch (hw_led_state) {
-			case 0:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 1:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 2:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 3:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-		}
-	}
-	else {
-		/* turn all off */
-		GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-		GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index e13eb841e48d..bbe4d5f6afaa 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,8 +24,6 @@ pxa_leds_init(void)
 		leds_event = mainstone_leds_event;
 	if (machine_is_pxa_idp())
 		leds_event = idp_leds_event;
-	if (machine_is_trizeps4())
-		leds_event = trizeps4_leds_event;
 
 	leds_event(led_start);
 	return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 58f3402a0375..b4d00aba0e31 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/spi/spi.h>
 #include <linux/smc91x.h>
 
 #include <asm/types.h>
@@ -38,6 +39,7 @@
 #include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
 	/* SSP2 */
 	GPIO25_SSP2_SCLK,
-	GPIO17_SSP2_FRM,
 	GPIO27_SSP2_TXD,
+	GPIO17_GPIO,	/* SFRM as chip-select */
 
 	/* Debug Ethernet */
 	GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x)		((0x00000000) | ((x) << 9))
-#define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2)	((0x80000000) | ((x) << 18) | 0x20000 |\
-			 ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
-	CMD0(0x1), /* reset */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
-	CMD0(0x29),		/* Display ON */
-	CMD2(0xB8, 0xFF, 0xF9),	/* Output Control */
-	CMD0(0x11),		/* Sleep out */
-	CMD1(0xB0, 0x16),	/* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
-	CMD0(0x28),		/* Display OFF */
-	CMD2(0xB8, 0x80, 0x02),	/* Output Control */
-	CMD0(0x10),		/* Sleep in */
-	CMD1(0xB0, 0x00),	/* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x80),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x81),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
-	CMD1(0xcf, 0x02), 	/* Blanking period control (1) */
-	CMD2(0xd0, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd1, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd2, 0x14, 0x00),	/* CKV 1,2 timing control */
-	CMD2(0xd3, 0x1a, 0x0f),	/* OEV timing control */
-	CMD2(0xd4, 0x1f, 0xaf),	/* ASW timing control (1) */
-	CMD1(0xd5, 0x14),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
-	CMD1(0xd6, 0x02),	/* Blanking period control (1) */
-	CMD2(0xd7, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd8, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd9, 0x00, 0x08),	/* CKV 1,2 timing control */
-	CMD2(0xde, 0x05, 0x0a),	/* OEV timing control */
-	CMD2(0xdf, 0x0a, 0x19),	/* ASW timing control (1) */
-	CMD1(0xe0, 0x0a),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
-	CMD2(0xb8, 0xff, 0xf9),	/* Output control */
-	CMD0(0x11),		/* sleep out */
-	CMD1(0xba, 0x01),	/* Display mode (1) */
-	CMD1(0xbb, 0x00),	/* Display mode (2) */
-	CMD1(0x3a, 0x60),	/* Display mode 18-bit RGB */
-	CMD1(0xbf, 0x10),	/* Drive system change control */
-	CMD1(0xb1, 0x56),	/* Booster operation setup */
-	CMD1(0xb2, 0x33),	/* Booster mode setup */
-	CMD1(0xb3, 0x11),	/* Booster frequency setup */
-	CMD1(0xb4, 0x02),	/* Op amp/system clock */
-	CMD1(0xb5, 0x35),	/* VCS voltage */
-	CMD1(0xb6, 0x40),	/* VCOM voltage */
-	CMD1(0xb7, 0x03),	/* External display signal */
-	CMD1(0xbd, 0x00),	/* ASW slew rate */
-	CMD1(0xbe, 0x00),	/* Dummy data for QuadData operation */
-	CMD1(0xc0, 0x11),	/* Sleep out FR count (A) */
-	CMD1(0xc1, 0x11),	/* Sleep out FR count (B) */
-	CMD1(0xc2, 0x11),	/* Sleep out FR count (C) */
-	CMD2(0xc3, 0x20, 0x40),	/* Sleep out FR count (D) */
-	CMD2(0xc4, 0x60, 0xc0),	/* Sleep out FR count (E) */
-	CMD2(0xc5, 0x10, 0x20),	/* Sleep out FR count (F) */
-	CMD1(0xc6, 0xc0),	/* Sleep out FR count (G) */
-	CMD2(0xc7, 0x33, 0x43),	/* Gamma 1 fine tuning (1) */
-	CMD1(0xc8, 0x44),	/* Gamma 1 fine tuning (2) */
-	CMD1(0xc9, 0x33),	/* Gamma 1 inclination adjustment */
-	CMD1(0xca, 0x00),	/* Gamma 1 blue offset adjustment */
-	CMD2(0xec, 0x01, 0xf0),	/* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
-	static int last_nparam = -1;
-
-	/* check if it is necessary to re-config SSP */
-	if (nparam == last_nparam)
-		return;
-
-	ssp_disable(dev);
-	ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
-	last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
-	static int ssp_initialized;
-	static struct ssp_dev ssp2;
-
-	int i;
-
-	if (!ssp_initialized) {
-		ssp_init(&ssp2, 2, SSP_NO_IRQ);
-		ssp_initialized = 1;
-	}
-
-	clk_enable(ssp2.ssp->clk);
-	for (i = 0; i < num; i++, cmd++) {
-		ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
-		ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
-		/* FIXME: ssp_flush() is mandatory here to work */
-		ssp_flush(&ssp2);
-	}
-	clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
-		if (var->xres > 240) {
-			/* VGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
-		} else {
-			/* QVGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
-		}
-	} else
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
 	[0] = {
 		/* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
 	.modes			= tpo_tdo24mtea1_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= littleton_lcd_power,
 };
 
 static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+	.num_chipselect		= 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.cs_control	= littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+	{
+		.modalias	= "tdo24m",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.controller_data= &littleton_tdo24m_chip,
+	},
+};
+
+static void __init littleton_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+	if (err) {
+		pr_warning("failed to request GPIO for LCS CS\n");
+		return;
+	}
+
+	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+	pxa2xx_set_spi_info(2, &littleton_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
 	 */
 	platform_device_register(&smc91x_device);
 
+	littleton_init_spi();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index b7038948d1d4..de3f67daaacf 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -40,7 +40,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
@@ -51,6 +51,43 @@
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long lpd270_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,	/* Mainboard Flash */
+	GPIO78_nCS_2,	/* CPLD + Ethernet */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* AC97 */
+	GPIO45_AC97_SYSCLK,
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
 
 static unsigned int lpd270_irq_enabled;
 
@@ -88,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 
 			pending = __raw_readw(LPD270_INT_STATUS) &
 						lpd270_irq_enabled;
@@ -265,8 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 	.modes			= &sharp_lq057q3dc02_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 12.1" TFT SVGA (LoLo display number 2) */
@@ -287,8 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 	.modes			= &sharp_lq121s1dg31_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.6" TFT QVGA (LoLo display number 3) */
@@ -309,8 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 static struct pxafb_mach_info sharp_lq036q1da01 = {
 	.modes			= &sharp_lq036q1da01_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
@@ -331,8 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = {
 static struct pxafb_mach_info sharp_lq64d343 = {
 	.modes			= &sharp_lq64d343_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 10.4" TFT VGA (LoLo display number 7) */
@@ -353,8 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = {
 static struct pxafb_mach_info sharp_lq10d368 = {
 	.modes			= &sharp_lq10d368_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
@@ -375,8 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 	.modes			= &sharp_lq035q7db02_20_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -411,27 +447,15 @@ static struct platform_device *platform_devices[] __initdata = {
 	&lpd270_flash_device[1],
 };
 
-static int lpd270_ohci_init(struct device *dev)
-{
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= lpd270_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static void __init lpd270_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
@@ -442,12 +466,6 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	/*
-	 * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
-	 */
-	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
-	pxa_gpio_mode(GPIO16_PWM0_MD);
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	pxa_set_ac97_info(NULL);
@@ -473,15 +491,6 @@ static void __init lpd270_map_io(void)
 	pxa_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x00008800;
-	PGSR1 = 0x00000002;
-	PGSR2 = 0x0001FC00;
-	PGSR3 = 0x00001F81;
-	PWER  = 0xC0000002;
-	PRER  = 0x00000002;
-	PFER  = 0x00000002;
-
 	/* for use I SRAM as framebuffer.  */
 	PSLR |= 0x00000F04;
 	PCFR  = 0x00000066;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 4ffdff2d9ff1..bff704354c1a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -57,13 +57,36 @@
 
 static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO15_nCS_1,	/* CS1 - Flash */
+	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
 	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
+	GPIO80_nCS_4,	/* CS4 - SA1111 */
 
 	/* SSP data pins */
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* LCD - 16bpp DSTN */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
 	/* BTUART */
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
@@ -132,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	} while (pending);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 143f28adaf95..519138bc5f85 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -409,7 +409,7 @@ static struct platform_device backlight = {
  * LEDs
  */
 
-struct gpio_led gpio_leds[] = {
+static struct gpio_led gpio_leds[] = {
 	{
 		.name = "magician::vibra",
 		.default_trigger = "none",
@@ -669,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = {
  * USB OHCI
  */
 
-static int magician_ohci_init(struct device *dev)
-{
-	UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
-	    ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.init         = magician_ohci_init,
-	.power_budget = 0,
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	.power_budget	= 0,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d44af761564d..f2c7ad8f2b6b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -162,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = MST_INTSETCLR & mainstone_irq_enabled;
 	} while (pending);
@@ -508,19 +507,9 @@ static struct platform_device *platform_devices[] __initdata = {
 	&mst_gpio_keys_device,
 };
 
-static int mainstone_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= mainstone_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 925575f10acf..2061c00c8ead 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -25,7 +25,12 @@
 
 #include "generic.h"
 
-#define PGSR(x)		__REG2(0x40F00020, ((x) & 0x60) >> 3)
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+#define PGSR(x)		__REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x)	__GAFR(0, x)
+#define GAFR_U(x)	__GAFR(1, x)
 
 #define PWER_WE35	(1 << 24)
 
@@ -38,49 +43,59 @@ struct gpio_desc {
 };
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int gpio_nr;
 
-static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
-{
-	unsigned mask = GPIO_bit(gpio);
-
-	/* low power state */
-	switch (lpm) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-	return 0;
-}
+static unsigned long gpdr_lpm[4];
 
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
-	int fn;
+	int bank = gpio_to_bank(gpio);
+	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+	int shft = (gpio & 0xf) << 1;
+	int fn = MFP_AF(c);
+	int dir = c & MFP_DIR_OUT;
 
-	fn = MFP_AF(c);
 	if (fn > 3)
 		return -EINVAL;
 
-	/* alternate function and direction */
-	gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
-	GAFR(gpio) = gafr |  (fn  << ((gpio & 0xf) * 2));
+	/* alternate function and direction at run-time */
+	gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+	gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
 
-	if (c & MFP_DIR_OUT)
+	if (uorl == 0)
+		GAFR_L(bank) = gafr;
+	else
+		GAFR_U(bank) = gafr;
+
+	if (dir == MFP_DIR_OUT)
 		GPDR(gpio) |= mask;
 	else
 		GPDR(gpio) &= ~mask;
 
-	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
-		return -EINVAL;
+	/* alternate function and direction at low power mode */
+	switch (c & MFP_LPM_STATE_MASK) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(bank) |= mask;
+		dir = MFP_DIR_OUT;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(bank) &= ~mask;
+		dir = MFP_DIR_OUT;
+		break;
+	case MFP_LPM_DEFAULT:
+		break;
+	default:
+		/* warning and fall through, treat as MFP_LPM_DEFAULT */
+		pr_warning("%s: GPIO%d: unsupported low power mode\n",
+				__func__, gpio);
+		break;
+	}
+
+	if (dir == MFP_DIR_OUT)
+		gpdr_lpm[bank] |= mask;
+	else
+		gpdr_lpm[bank] &= ~mask;
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -91,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		return -EINVAL;
 	}
 
-	if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+	if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
 		pr_warning("%s: output GPIO%d unable to wakeup\n",
 				__func__, gpio);
 		return -EINVAL;
@@ -135,7 +150,7 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
 {
-	unsigned long flags;
+	unsigned long flags, c;
 	int gpio;
 
 	gpio = __mfp_validate(mfp);
@@ -143,7 +158,11 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
 		return;
 
 	local_irq_save(flags);
-	__mfp_config_lpm(gpio, lpm);
+
+	c = gpio_desc[gpio].config;
+	c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+	__mfp_config_gpio(gpio, c);
+
 	local_irq_restore(flags);
 }
 
@@ -187,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
 }
 
 #ifdef CONFIG_PXA25x
-static int __init pxa25x_mfp_init(void)
+static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
-	if (cpu_is_pxa25x()) {
-		for (i = 0; i <= 84; i++)
-			gpio_desc[i].valid = 1;
+	for (i = 0; i <= 84; i++)
+		gpio_desc[i].valid = 1;
 
-		for (i = 0; i <= 15; i++) {
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+	for (i = 0; i <= 15; i++) {
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
 	}
 
-	return 0;
+	gpio_nr = 85;
 }
-postcore_initcall(pxa25x_mfp_init);
+#else
+static inline void pxa25x_mfp_init(void) {}
 #endif /* CONFIG_PXA25x */
 
 #ifdef CONFIG_PXA27x
@@ -233,45 +251,106 @@ int keypad_set_wake(unsigned int on)
 	return 0;
 }
 
-static int __init pxa27x_mfp_init(void)
+static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
-	if (cpu_is_pxa27x()) {
-		for (i = 0; i <= 120; i++) {
-			/* skip GPIO2, 5, 6, 7, 8, they are not
-			 * valid pins allow configuration
-			 */
-			if (i == 2 || i == 5 || i == 6 ||
-			    i == 7 || i == 8)
-				continue;
+	for (i = 0; i <= 120; i++) {
+		/* skip GPIO2, 5, 6, 7, 8, they are not
+		 * valid pins allow configuration
+		 */
+		if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+			continue;
 
-			gpio_desc[i].valid = 1;
-		}
+		gpio_desc[i].valid = 1;
+	}
 
-		/* Keypad GPIOs */
-		for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-			gpio = pxa27x_pkwr_gpio[i];
-			gpio_desc[gpio].can_wakeup = 1;
-			gpio_desc[gpio].keypad_gpio = 1;
-			gpio_desc[gpio].mask = 1 << i;
-		}
+	/* Keypad GPIOs */
+	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+		gpio = pxa27x_pkwr_gpio[i];
+		gpio_desc[gpio].can_wakeup = 1;
+		gpio_desc[gpio].keypad_gpio = 1;
+		gpio_desc[gpio].mask = 1 << i;
+	}
 
-		/* Overwrite GPIO13 as a PWER wakeup source */
-		for (i = 0; i <= 15; i++) {
-			/* skip GPIO2, 5, 6, 7, 8 */
-			if (GPIO_bit(i) & 0x1e4)
-				continue;
+	/* Overwrite GPIO13 as a PWER wakeup source */
+	for (i = 0; i <= 15; i++) {
+		/* skip GPIO2, 5, 6, 7, 8 */
+		if (GPIO_bit(i) & 0x1e4)
+			continue;
 
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
+	}
+
+	gpio_desc[35].can_wakeup = 1;
+	gpio_desc[35].mask = PWER_WE35;
+
+	gpio_nr = 121;
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
+
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
 
-		gpio_desc[35].can_wakeup = 1;
-		gpio_desc[35].mask = PWER_WE35;
+static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+
+		saved_gafr[0][i] = GAFR_L(i);
+		saved_gafr[1][i] = GAFR_U(i);
+		saved_gpdr[i] = GPDR(i * 32);
+
+		GPDR(i * 32) = gpdr_lpm[i];
 	}
+	return 0;
+}
 
+static int pxa2xx_mfp_resume(struct sys_device *d)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+		GAFR_L(i) = saved_gafr[0][i];
+		GAFR_U(i) = saved_gafr[1][i];
+		GPDR(i * 32) = saved_gpdr[i];
+	}
+	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
 }
-postcore_initcall(pxa27x_mfp_init);
-#endif /* CONFIG_PXA27x */
+#else
+#define pxa2xx_mfp_suspend	NULL
+#define pxa2xx_mfp_resume	NULL
+#endif
+
+struct sysdev_class pxa2xx_mfp_sysclass = {
+	.name		= "mfp",
+	.suspend	= pxa2xx_mfp_suspend,
+	.resume		= pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+	int i;
+
+	if (!cpu_is_pxa2xx())
+		return 0;
+
+	if (cpu_is_pxa25x())
+		pxa25x_mfp_init();
+
+	if (cpu_is_pxa27x())
+		pxa27x_mfp_init();
+
+	/* initialize gafr_run[], pgsr_lpm[] from existing values */
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+		gpdr_lpm[i] = GPDR(i * 32);
+
+	return sysdev_class_register(&pxa2xx_mfp_sysclass);
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 000000000000..0842c531ee4d
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,905 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
+#include <mach/mioa701.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+	/* Mio global */
+	MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+
+	/* Backlight PWM 0 */
+	GPIO16_PWM0_OUT,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+	/* USB */
+	MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* Bluetooth */
+	GPIO44_BTUART_CTS,
+	GPIO42_BTUART_RXD,
+	GPIO45_BTUART_RTS,
+	GPIO43_BTUART_TXD,
+	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+
+	/* GPS */
+	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* GSM */
+	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* Sound */
+	GPIO89_AC97_SYSCLK,
+	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+	/* Leds */
+	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+	/* Keyboard */
+	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* Unknown */
+	MFP_CFG_IN(GPIO14, AF0),
+	MFP_CFG_IN(GPIO20, AF0),
+	MFP_CFG_IN(GPIO21, AF0),
+	MFP_CFG_IN(GPIO33, AF0),
+	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO80, AF0),
+	MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO96, AF0),
+	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+#define MIO_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define MIO_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int mio_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+static void mio_gpio_free(struct gpio_ress *gpios, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		gpio_free(gpios[i].gpio);
+}
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 50,
+	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ *  - the LTM0305A776C datasheet,
+ *  - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+	.pixclock		= 220000,	/* CLK=4.545 MHz */
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 4,
+	.vsync_len		= 2,
+	.left_margin		= 6,
+	.right_margin		= 4,
+	.upper_margin		= 5,
+	.lower_margin		= 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+	.modes			= &mioa701_ltm0305a776c,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static unsigned int mioa701_matrix_keys[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_MEDIA),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_ENTER),
+	KEY(1, 2, KEY_CONNECT),	/* GPS key */
+	KEY(2, 0, KEY_LEFT),
+	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
+	KEY(2, 2, KEY_CAMERA)	/* Camera key */
+};
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+	.matrix_key_rows = 3,
+	.matrix_key_cols = 3,
+	.matrix_key_map = mioa701_matrix_keys,
+	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
+	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+	.buttons  = mioa701_button_table,
+	.nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ *             GPIO24_GSM_MOD_RESET_CMD = 0
+ *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ *                GPIO88_GSM_nMOD_ON_CMD = 1
+ *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ *                GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+	int is_on;
+
+	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+	return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+	       is_gsm_on() ? "on" : "off");
+	return IRQ_HANDLED;
+}
+
+struct gpio_ress gsm_gpios[] = {
+	MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
+	MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+};
+
+static int __init gsm_init(void)
+{
+	int rc;
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+	if (rc)
+		goto err_gpio;
+	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			 "GSM XS200 Power Irq", NULL);
+	if (rc)
+		goto err_irq;
+
+	gpio_set_wake(GPIO113_GSM_EVENT, 1);
+	return 0;
+
+err_irq:
+	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+	printk(KERN_ERR "Mioa701: gsm not available\n");
+	return rc;
+}
+
+static void gsm_exit(void)
+{
+	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on  : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static void udc_power_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 0);
+		break;
+	case PXA2XX_UDC_CMD_CONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 1);
+		break;
+	default:
+		printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
+		break;
+	}
+}
+
+static int is_usb_connected(void)
+{
+	return !!gpio_get_value(GPIO13_USB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+	.udc_is_connected = is_usb_connected,
+	.udc_command	  = udc_power_command,
+};
+
+struct gpio_ress udc_gpios[] = {
+	MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+};
+
+static int __init udc_init(void)
+{
+	pxa_set_udc_info(&mioa701_udc_info);
+	return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
+}
+
+static void udc_exit(void)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
+}
+
+/*
+ * SDIO/MMC Card controller
+ */
+static void mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask)
+		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
+	else
+		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
+}
+
+static int mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO78_SDIO_RO);
+}
+
+struct gpio_ress mci_gpios[] = {
+	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
+	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
+	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
+};
+
+static void mci_exit(struct device *dev, void *data)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
+}
+
+static struct pxamci_platform_data mioa701_mci_info;
+
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
+{
+	int rc;
+	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
+	if (rc)
+		goto err_gpio;
+	/* enable RE/FE interrupt on card insertion and removal */
+	rc = request_irq(irq, detect_int,
+			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			 IRQF_TRIGGER_FALLING,
+			 "MMC card detect", data);
+	if (rc)
+		goto err_irq;
+
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
+	return 0;
+
+err_irq:
+	dev_err(dev, "mioa701_mci_init: MMC/SD:"
+		" can't request MMC card detect IRQ\n");
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+err_gpio:
+	return rc;
+}
+
+static struct pxamci_platform_data mioa701_mci_info = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init	  = mci_init,
+	.get_ro	  = mci_get_ro,
+	.setpower = mci_setpower,
+	.exit	  = mci_exit,
+};
+
+/* FlashRAM */
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_64M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 2,
+	/* .set_vpp = mioa701_set_vpp, */
+};
+
+static struct platform_device strataflash = {
+	.name	       = "physmap-flash",
+	.id	       = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * this sequence is as follows :
+ *   - disables interrupts
+ *   - initialize SDRAM (self refresh RAM into active RAM)
+ *   - initialize GPIOs (depends on value at 0xa020b020)
+ *   - initialize coprossessors
+ *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ *   - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR	0xa020b000
+#define RESUME_ENABLE_VAL	0x0f0f0f0f
+#define RESUME_BT_ADDR		0xa020b020
+#define RESUME_UNKNOWN_ADDR	0xa020b024
+#define RESUME_VECTOR_ADDR	0xa0100000
+#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+	int i;
+	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *src = &mioa701_bootstrap;
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	int i = 0, is_bt_on;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	/* Devices prepare suspend */
+	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		save_buffer[i] = mem_resume_vector[i];
+	save_buffer[i++] = *mem_resume_enabler;
+	save_buffer[i++] = *mem_resume_bt;
+	save_buffer[i++] = *mem_resume_unknown;
+
+	*mem_resume_enabler = RESUME_ENABLE_VAL;
+	*mem_resume_bt	    = is_bt_on;
+
+	install_bootstrap();
+	return 0;
+}
+
+static int mioa701_sys_resume(struct sys_device *sysdev)
+{
+	int i = 0;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		mem_resume_vector[i] = save_buffer[i];
+	*mem_resume_enabler = save_buffer[i++];
+	*mem_resume_bt	    = save_buffer[i++];
+	*mem_resume_unknown = save_buffer[i++];
+
+	return 0;
+}
+
+static struct sysdev_class mioa701_sysclass = {
+	.name = "mioa701",
+};
+
+static struct sys_device sysdev_bootstrap = {
+	.cls		= &mioa701_sysclass,
+};
+
+static struct sysdev_driver driver_bootstrap = {
+	.suspend	= &mioa701_sys_suspend,
+	.resume		= &mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+	int rc;
+	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+	rc = sysdev_class_register(&mioa701_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&sysdev_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys driver\n");
+		return -ENODEV;
+	}
+
+	save_buffer = kmalloc(save_size, GFP_KERNEL);
+	if (!save_buffer)
+		return -ENOMEM;
+	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+	       save_size);
+	return 0;
+}
+
+static void bootstrap_exit(void)
+{
+	kfree(save_buffer);
+	sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
+	sysdev_unregister(&sysdev_bootstrap);
+	sysdev_class_unregister(&mioa701_sysclass);
+
+	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+	       "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+	"mioa701_battery"
+};
+
+static void mioa701_set_charge(int flags)
+{
+	gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+}
+
+static struct pda_power_pdata power_pdata = {
+	.is_ac_online	= is_usb_connected,
+	.set_charge = mioa701_set_charge,
+	.supplied_to = supplicants,
+	.num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+	[0] = {
+		.name	= "ac",
+		.start	= gpio_to_irq(GPIO13_USB_DETECT),
+		.end	= gpio_to_irq(GPIO13_USB_DETECT),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device power_dev = {
+	.name		= "pda-power",
+	.id		= -1,
+	.resource	= power_resources,
+	.num_resources	= ARRAY_SIZE(power_resources),
+	.dev = {
+		.platform_data	= &power_pdata,
+	},
+};
+
+#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
+static struct wm97xx *battery_wm;
+
+static enum power_supply_property battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,	/* Necessary for apm */
+};
+
+static int get_battery_voltage(void)
+{
+	int adc = -1;
+
+	if (battery_wm)
+		adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
+	return adc;
+}
+
+static int get_battery_status(struct power_supply *b)
+{
+	int status;
+
+	if (is_usb_connected())
+		status = POWER_SUPPLY_STATUS_CHARGING;
+	else
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return status;
+}
+
+static int get_property(struct power_supply *b,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	int rc = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = get_battery_status(b);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 0xfd0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = 0xc00;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = get_battery_voltage();
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 100;
+		break;
+	default:
+		val->intval = -1;
+		rc = -1;
+	}
+
+	return rc;
+};
+
+static struct power_supply battery_ps = {
+	.name = "mioa701_battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.get_property = get_property,
+	.properties = battery_props,
+	.num_properties = ARRAY_SIZE(battery_props),
+};
+
+static int battery_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	int rc;
+
+	battery_wm = wm;
+
+	rc = power_supply_register(NULL, &battery_ps);
+	if (rc)
+		dev_err(&pdev->dev,
+		"Could not register mioa701 battery -> %d\n", rc);
+	return rc;
+}
+
+static int battery_remove(struct platform_device *pdev)
+{
+	battery_wm = NULL;
+	return 0;
+}
+
+static struct platform_driver mioa701_battery_driver = {
+	.driver = {
+		.name = "wm97xx-battery",
+	},
+	.probe = battery_probe,
+	.remove = battery_remove
+};
+
+static int __init mioa701_battery_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&mioa701_battery_driver);
+	if (rc)
+		printk(KERN_ERR "Could not register mioa701 battery driver\n");
+	return rc;
+}
+
+#else
+static int __init mioa701_battery_init(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
+static struct platform_device var = {			\
+	.name		= strname,			\
+	.id		= -1,				\
+	.dev		= {				\
+		.platform_data = pdata,			\
+		.parent	= tparent,			\
+	},						\
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata)	\
+	MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
+		&mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
+MIO_SIMPLE_DEV(pxa2xx_ac97,	  "pxa2xx-ac97",    NULL)
+MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
+MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+
+static struct platform_device *devices[] __initdata = {
+	&mioa701_gpio_keys,
+	&mioa701_backlight,
+	&mioa701_led,
+	&pxa2xx_pcm,
+	&pxa2xx_ac97,
+	&mio_wm9713_codec,
+	&mioa701_sound,
+	&power_dev,
+	&strataflash,
+	&mioa701_board
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+	mioa701_machine_exit();
+	gpio_set_value(GPIO18_POWEROFF, 1);
+}
+
+static void mioa701_restart(char c)
+{
+	mioa701_machine_exit();
+	arm_machine_restart(c);
+}
+
+struct gpio_ress global_gpios[] = {
+	MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+};
+
+static void __init mioa701_machine_init(void)
+{
+	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+	RTTR = 32768 - 1; /* Reset crazy WinCE value */
+	UP2OCR = UP2OCR_HXOE;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	bootstrap_init();
+	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_mci_info(&mioa701_mci_info);
+	pxa_set_keypad_info(&mioa701_keypad_info);
+	udc_init();
+	pm_power_off = mioa701_poweroff;
+	arm_pm_restart = mioa701_restart;
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	gsm_init();
+	mioa701_battery_init();
+}
+
+static void mioa701_machine_exit(void)
+{
+	udc_exit();
+	bootstrap_exit();
+	gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= &pxa_map_io,
+	.init_irq	= &pxa27x_init_irq,
+	.init_machine	= mioa701_machine_init,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 000000000000..a647693d9856
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,36 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow jumpaddr to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+	.data
+ENTRY(mioa701_bootstrap)
+0:
+	b	1f
+ENTRY(mioa701_jumpaddr)
+	.word	0x40f00008		@ PSPR in no-MMU mode
+1:
+	mov	r0,     #0xa0000000	@ Don't suppose memory access works
+	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	mov	r1, #0
+	str	r1, [r0]		@ Early disable resume for next boot
+	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
+	ldr	r0, [r0]
+	mov	pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+	.data
+	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 000000000000..8a73814126b1
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/mach-pxa/mp900.c
+ *
+ *  Support for the NEC MobilePro900/C platform
+ *
+ *  Based on mach-pxa/gumstix.c
+ *
+ *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+	/* 400Mhz PXA2 = 2.5ns / instruction */
+
+	int cyc = delay / 10;
+
+	/* 4 Instructions = 4 x 2.5ns = 10ns */
+	__asm__ volatile ("0:\n"
+		"subs %0, %1, #1\n"
+		"bge 0b\n"
+		:"=r" (cyc)
+		:"0"(cyc)
+	);
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+	.remote_wakeup_enable = 1,
+	.delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+	[0] =	{
+		.start	= 0x0d000000,
+		.end	= 0x0d000000 + 1,
+		.flags	= IORESOURCE_MEM,
+		},
+	[1] =	{
+		.start  = 0x0d000000 + 4,
+		.end	= 0x0d000000 + 5,
+		.flags  = IORESOURCE_MEM,
+		},
+	[2] =	{
+		.start	= 61,
+		.end	= 61,
+		.flags	= IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device mp900c_dummy_device = {
+	.name		= "mp900c_dummy",
+	.id		= -1,
+};
+
+static struct platform_device mp900c_usb = {
+	.name		= "isp116x-hcd",
+	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
+	.resource	= isp116x_pfm_resources,
+	.dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mp900c_dummy_device,
+	&mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0220100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.timer		= &pxa_timer,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.init_machine	= mp900c_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fe924a23debe..4447711c9fc6 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,6 +25,8 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -340,6 +342,23 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -401,6 +420,7 @@ static void __init palmtx_init(void)
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 000000000000..2f730da3bba8
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,554 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ *	Sergey Lapin <slapin@ossfans.org>
+ *	Alex Osborne <bobofdoom@gmail.com>
+ *	Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ *	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO115_GPIO,	/* SD RO */
+	GPIO98_GPIO,	/* SD power */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO49_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO12_GPIO,	/* usb pullup */
+	GPIO95_GPIO,	/* usb power */
+
+	/* Matrix keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO20_GPIO,	/* bl power */
+	GPIO21_GPIO,	/* LCD border switch */
+	GPIO22_GPIO,	/* LCD border color */
+	GPIO96_GPIO,	/* lcd power */
+
+	/* Misc. */
+	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
+	GPIO88_GPIO,				/* green led */
+	GPIO27_GPIO,				/* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+				irq_handler_t palmz72_detect_int, void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	/* SD_POWER is not actually power, but it is more like chip
+	 * select, i.e. it is inverted */
+
+	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	if (err)
+		goto err4;
+	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	if (p_d->ocr_mask & (1 << vdd))
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	else
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmz72_mci_power,
+	.get_ro		= palmz72_mci_ro,
+	.init 		= palmz72_mci_init,
+	.exit		= palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmz72_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMZ72_MAX_INTENSITY,
+	.dft_brightness	= PALMZ72_MAX_INTENSITY,
+	.pwm_period_ns	= PALMZ72_PERIOD_NS,
+	.init		= palmz72_backlight_init,
+	.notify		= palmz72_backlight_notify,
+	.exit		= palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmz72_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+	.startup		= palmz72_irda_startup,
+	.shutdown		= palmz72_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "palmz72:green:led",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmz72_is_ac_online,
+	.is_usb_online   = palmz72_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmz72_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+	.modes		= palmz72_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+	.magic0 = 0xb4e6,
+	.magic1 = 1,
+
+	/* reset state, MMU off etc */
+	.arm_control = 0,
+	.aux_control = 0,
+	.ttb = 0,
+	.domain_access = 0,
+	.process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* sys_device for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+{
+	/* setup the resume_info struct for the original bootloader */
+	palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+
+	/* Storing memory touched by ROM */
+	store_ptr = *PALMZ72_SAVE_DWORD;
+
+	/* Setting PSPR to a proper value */
+	PSPR = virt_to_phys(&palmz72_resume_info);
+
+	return 0;
+}
+
+static int palmz72_pm_resume(struct sys_device *dev)
+{
+	*PALMZ72_SAVE_DWORD = store_ptr;
+	return 0;
+}
+
+static struct sysdev_class palmz72_pm_sysclass = {
+	.name = "palmz72_pm",
+	.suspend = palmz72_pm_suspend,
+	.resume = palmz72_pm_resume,
+};
+
+static struct sys_device palmz72_pm_device = {
+	.cls = &palmz72_pm_sysclass,
+};
+
+static int __init palmz72_pm_init(void)
+{
+	int ret = -ENODEV;
+	if (machine_is_palmz72()) {
+		ret = sysdev_class_register(&palmz72_pm_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&palmz72_pm_device);
+	}
+	return ret;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmz72_backlight,
+	&palmz72_leds,
+	&power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+	set_pxa_fb_info(&palmz72_lcd_screen);
+	pxa_set_mci_info(&palmz72_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmz72_ficp_platform_data);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmz72_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 730b9f6ede1d..36135a02fdc7 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pcm027.h>
@@ -86,6 +86,28 @@
  * *) CPU internal use only
  */
 
+static unsigned long pcm027_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* Ethernet */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GPIO */
+	GPIO52_GPIO,	/* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+	GPIO90_GPIO,	/* PCM027_LED_CPU */
+	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
+#endif
+	GPIO114_GPIO,	/* IRQ from CAN controller */
+};
+
 /*
  * SMC91x network controller specific stuff
  */
@@ -206,13 +228,9 @@ static void __init pcm027_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
-	/* LEDs (on demand only) */
-#ifdef CONFIG_LEDS_GPIO
-	pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
-	pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
-#endif /* CONFIG_LEDS_GPIO */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 420c9b3813f6..f601425f1b1e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -262,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 	} while (pending);
@@ -328,36 +327,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
 	.exit		= pcm990_mci_exit,
 };
 
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
-	/*
-	 * disable USB port 2 and 3
-	 * power sense is active low
-	 */
-	UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
-				UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
-	/*
-	 * wait 10ms after Power on
-	 * overcurrent per port
-	 * power switch per port
-	 */
-	UHCRHDA = (5<<24) | (1<<11) | (1<<8);	/* FIXME: Required? */
-
-	return 0;
-}
-
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= pcm990_ohci_init,
-	.exit		= NULL,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.power_on_delay	= 10,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 1b539e675579..164eb0bb6321 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
+static int pxa_pm_prepare(void)
+{
+	int ret = 0;
+
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+		ret = pxa_cpu_pm_fns->prepare();
+
+	return ret;
+}
+
+static void pxa_pm_finish(void)
+{
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+		pxa_cpu_pm_fns->finish();
+}
+
 static struct platform_suspend_ops pxa_pm_ops = {
 	.valid		= pxa_pm_valid,
 	.enter		= pxa_pm_enter,
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
 };
 
 static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3f5f484549b3..2e3bd8b1523b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,9 @@
 #include <linux/fb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,7 +36,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/i2c.h>
@@ -42,6 +45,7 @@
 #include <mach/pxafb.h>
 #include <mach/sharpsl.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -51,6 +55,88 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long poodle_pin_config[] __initdata = {
+	/* I/O */
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO18_RDY,
+
+	/* Clock */
+	GPIO12_32KHz,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
+	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
+	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
+
+	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
+	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
+};
+
 static struct resource poodle_scoop_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
@@ -62,6 +148,7 @@ static struct resource poodle_scoop_resources[] = {
 static struct scoop_config poodle_scoop_setup = {
 	.io_dir		= POODLE_SCOOP_IO_DIR,
 	.io_out		= POODLE_SCOOP_IO_OUT,
+	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device poodle_scoop_device = {
@@ -74,27 +161,6 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
-static void poodle_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 {
 	.dev        = &poodle_scoop_device.dev,
@@ -107,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config poodle_pcmcia_config = {
 	.devs         = &poodle_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = poodle_pcmcia_init,
 };
 
 EXPORT_SYMBOL(poodle_scoop_device);
@@ -136,62 +201,55 @@ struct platform_device poodle_locomo_device = {
 
 EXPORT_SYMBOL(poodle_locomo_device);
 
-/*
- * Poodle SSP Device
- */
-
-struct platform_device poodle_ssp_device = {
-	.name		= "corgi-ssp",
-	.id		= -1,
-};
-
-struct corgissp_machinfo poodle_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= -1,
-	.cs_ads7846	= -1,
-	.cs_max1111	= -1,
-	.clk_lcdcon	= 2,
-	.clk_ads7846	= 36,
-	.clk_max1111	= 2,
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+	.num_chipselect	= 1,
 };
 
-
-/*
- * Poodle Touch Screen Device
- */
-static struct resource poodlets_resources[] = {
-	[0] = {
-		.start		= POODLE_IRQ_GPIO_TP_INT,
-		.end		= POODLE_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct ads7846_platform_data poodle_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static unsigned long poodle_get_hsync_invperiod(void)
+static void ads7846_cs(u32 command)
 {
-	return 0;
+	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static void poodle_null_hsync(void)
-{
-}
-
-static struct corgits_machinfo  poodle_ts_machinfo = {
-	.get_hsync_invperiod	= poodle_get_hsync_invperiod,
-	.put_hsync       	= poodle_null_hsync,
-	.wait_hsync      	= poodle_null_hsync,
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+	.cs_control		= ads7846_cs,
 };
 
-static struct platform_device poodle_ts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
-		.platform_data	= &poodle_ts_machinfo,
+static struct spi_board_info poodle_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 10000,
+		.bus_num	= 1,
+		.platform_data	= &poodle_ads7846_info,
+		.controller_data= &poodle_ads7846_chip,
+		.irq		= gpio_to_irq(POODLE_GPIO_TP_INT),
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(poodlets_resources),
-	.resource	= poodlets_resources,
 };
 
+static void __init poodle_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
+
+	pxa2xx_set_spi_info(1, &poodle_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -205,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
+	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+	if (err)
+		goto err_free_2;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+	if (err)
+		goto err_free_3;
+
+	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
+	gpio_direction_input(POODLE_GPIO_nSD_WP);
+
+	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
 	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_4;
+	}
+
+	return 0;
 
+err_free_4:
+	gpio_free(POODLE_GPIO_SD_PWR1);
+err_free_3:
+	gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(POODLE_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(POODLE_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -228,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+	if ((1 << vdd) & p_d->ocr_mask) {
+		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
 		mdelay(2);
-		GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
 	} else {
-		GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
-		GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
 	}
 }
 
 static int poodle_mci_get_ro(struct device *dev)
 {
+	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
 	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
 }
 
@@ -247,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev)
 static void poodle_mci_exit(struct device *dev, void *data)
 {
 	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(POODLE_GPIO_SD_PWR1);
+	gpio_free(POODLE_GPIO_SD_PWR);
+	gpio_free(POODLE_GPIO_nSD_WP);
+	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
@@ -263,38 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
  */
 static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF) {
-		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	} else {
-		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	}
+	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static int poodle_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void poodle_irda_shutdown(struct device *dev)
+{
+	gpio_free(POODLE_GPIO_IR_ON);
+}
+
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = poodle_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= poodle_irda_transceiver_mode,
+	.startup		= poodle_irda_startup,
+	.shutdown		= poodle_irda_shutdown,
 };
 
 
 /*
  * USB Device Controller
  */
-static void poodle_udc_command(int cmd)
-{
-	switch(cmd)	{
-	case PXA2XX_UDC_CMD_CONNECT:
-		GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	}
-}
-
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	/* no connect GPIO; poodle can't tell connection status */
-	.udc_command		= poodle_udc_command,
+	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
 };
 
 
@@ -316,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = {
 static struct pxafb_mach_info poodle_fb_info = {
 	.modes		= &poodle_fb_mode,
 	.num_modes	= 1,
-	.lccr0		= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-	.lccr3		= 0,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&poodle_locomo_device,
 	&poodle_scoop_device,
-	&poodle_ssp_device,
-	&poodle_ts_device,
 };
 
 static void poodle_poweroff(void)
@@ -344,59 +435,23 @@ static void __init poodle_init(void)
 	pm_power_off = poodle_poweroff;
 	arm_pm_restart = poodle_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
 	PCFR |= PCFR_OPDE;
 
-	/* cpu initialize */
-	/* Pgsr Register */
-  	PGSR0 = 0x0146dd80;
-  	PGSR1 = 0x03bf0890;
-  	PGSR2 = 0x0001c000;
-
-	/* Alternate Register */
-  	GAFR0_L = 0x01001000;
-  	GAFR0_U = 0x591a8010;
-  	GAFR1_L = 0x900a8451;
-  	GAFR1_U = 0xaaa5aaaa;
-  	GAFR2_L = 0x8aaaaaaa;
-  	GAFR2_U = 0x00000002;
-
-	/* Direction Register */
-  	GPDR0 = 0xd3f0904c;
-  	GPDR1 = 0xfcffb7d3;
-  	GPDR2 = 0x0001ffff;
-
-	/* Output Register */
-  	GPCR0 = 0x00000000;
-  	GPCR1 = 0x00000000;
-  	GPCR2 = 0x00000000;
-
-  	GPSR0 = 0x00400000;
-  	GPSR1 = 0x00000000;
-        GPSR2 = 0x00000000;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+	platform_scoop_config = &poodle_pcmcia_config;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		pr_warning("poodle: Unable to register LoCoMo device\n");
 
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
-	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret) {
-		printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
-	}
-	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
+	poodle_init_spi();
 }
 
 static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 305452b56e91..25d17a1dab78 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,6 +36,12 @@
 #include "devices.h"
 #include "clock.h"
 
+int cpu_is_pxa26x(void)
+{
+	return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
+}
+EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
+
 /*
  * Various clock factors driven by the CCCR register.
  */
@@ -203,48 +209,21 @@ static struct clk pxa25x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_COUNT
 };
 
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-
 	SAVE(CKEN);
 	SAVE(PSTR);
-
-	/* Clear GPIO transition detect bits */
-	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
-	PSSR = PSSR_RDH | PSSR_PH;
-
 	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
@@ -256,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa25x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
 
+static int pxa25x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.valid		= suspend_valid_only_mem,
 	.save		= pxa25x_cpu_pm_save,
 	.restore	= pxa25x_cpu_pm_restore,
 	.enter		= pxa25x_cpu_pm_enter,
+	.prepare	= pxa25x_cpu_pm_prepare,
+	.finish		= pxa25x_cpu_pm_finish,
 };
 
 static void __init pxa25x_init_pm(void)
@@ -330,6 +322,8 @@ static struct sys_device pxa25x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
@@ -338,11 +332,7 @@ static int __init pxa25x_init(void)
 {
 	int i, ret = 0;
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa255())
-		clks_register(&pxa25x_hwuart_clk, 1);
-
-	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+	if (cpu_is_pxa25x()) {
 
 		reset_status = RCSR;
 
@@ -365,9 +355,11 @@ static int __init pxa25x_init(void)
 			return ret;
 	}
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa255())
+	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
+	if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+		clks_register(&pxa25x_hwuart_clk, 1);
 		ret = platform_device_register(&pxa_device_hwuart);
+	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f9f6a9c31f4b..3e4ab2279c99 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -34,6 +34,13 @@
 #include "devices.h"
 #include "clock.h"
 
+void pxa27x_clear_otgph(void)
+{
+	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+		PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
@@ -183,36 +190,18 @@ static struct clk pxa27x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_MDREFR,
-	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
-	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-
+	SLEEP_SAVE_PCFR,
 	SLEEP_SAVE_COUNT
 };
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-	SAVE(GAFR3_L); SAVE(GAFR3_U);
-
 	SAVE(MDREFR);
-	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
-	SAVE(PFER); SAVE(PKWR);
+	SAVE(PCFR);
 
 	SAVE(CKEN);
 	SAVE(PSTR);
@@ -220,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
-
 	RESTORE(MDREFR);
-	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
-	RESTORE(PFER); RESTORE(PKWR);
+	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
 	RESTORE(CKEN);
-
 	RESTORE(PSTR);
 }
 
@@ -259,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa27x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
@@ -271,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
 	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 }
 
+static int pxa27x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,
 	.enter		= pxa27x_cpu_pm_enter,
+	.prepare	= pxa27x_cpu_pm_prepare,
+	.finish		= pxa27x_cpu_pm_finish,
 };
 
 static void __init pxa27x_init_pm(void)
@@ -349,7 +339,7 @@ struct platform_device pxa27x_device_i2c_power = {
 	.num_resources	= ARRAY_SIZE(i2c_power_resources),
 };
 
-void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
 	local_irq_disable();
 	PCFR |= PCFR_PI2CEN;
@@ -376,6 +366,8 @@ static struct sys_device pxa27x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 03cbc38103ed..b3cd5d0b0f35 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -203,6 +203,19 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
+static void clk_dummy_enable(struct clk *clk)
+{
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clk_dummy_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+};
+
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
@@ -211,6 +224,13 @@ static struct clk pxa3xx_clks[] = {
 		.delay          = 70,
 	},
 
+	/* Power I2C clock is always on */
+	{
+		.name		= "I2CCLK",
+		.ops		= &clk_dummy_ops,
+		.dev		= &pxa3xx_device_i2c_power.dev,
+	},
+
 	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
 	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
 	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
@@ -509,6 +529,30 @@ void __init pxa3xx_init_irq(void)
  * device registration specific to PXA3xx.
  */
 
+static struct resource i2c_power_resources[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_power_resources),
+};
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+	pxa3xx_device_i2c_power.dev.platform_data = info;
+}
+
 static struct platform_device *devices[] __initdata = {
 /*	&pxa_device_udc,	The UDC driver is PXA25x only */
 	&pxa_device_ffuart,
@@ -522,6 +566,7 @@ static struct platform_device *devices[] __initdata = {
 	&pxa3xx_device_ssp4,
 	&pxa27x_device_pwm0,
 	&pxa27x_device_pwm1,
+	&pxa3xx_device_i2c_power,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9996c612c3d6..1b2af575c40f 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -7,7 +7,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/proc-fns.h>
 
 #include <mach/pxa-regs.h>
@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio)
+int init_gpio_reset(int gpio, int output)
 {
 	int rc;
 
@@ -30,9 +30,12 @@ int init_gpio_reset(int gpio)
 		goto out;
 	}
 
-	rc = gpio_direction_input(gpio);
+	if (output)
+		rc = gpio_direction_output(gpio, 0);
+	else
+		rc = gpio_direction_input(gpio);
 	if (rc) {
-		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		printk(KERN_ERR "Can't configure reset_gpio\n");
 		gpio_free(gpio);
 		goto out;
 	}
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index e804ae09370c..15c2f1a8623b 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -116,24 +116,20 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 	{   0,   0},
 };
 
-/* MAX1111 Commands */
-#define MAXCTRL_PD0      1u << 0
-#define MAXCTRL_PD1      1u << 1
-#define MAXCTRL_SGL      1u << 2
-#define MAXCTRL_UNI      1u << 3
-#define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      1u << 7
-
 /*
  * Read MAX1111 ADC
  */
+extern int max1111_read_channel(int);
+
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
 	if (machine_is_tosa()) // Ugly, better move this function into another module
 	    return 0;
 
-	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
-			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+	/* max1111 accepts channels from 0-3, however,
+	 * it is encoded from 0-7 here in the code.
+	 */
+	return max1111_read_channel(channel >> 1);
 }
 
 void sharpsl_pm_pxa_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b569f3b4cf3a..524f656dc56d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,16 +19,23 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,7 +44,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
 #include <mach/i2c.h>
@@ -46,7 +53,7 @@
 #include <mach/ohci.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
-#include <mach/akita.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl.h>
 
@@ -57,6 +64,66 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long spitz_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO78_nCS_2,	/* SCOOP #2 */
+	GPIO80_nCS_4,	/* SCOOP #1 */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* GPIOs */
+	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
+	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
+	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
+	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
+	GPIO35_GPIO,	/* SPITZ_GPIO_USB_DEVICE */
+	GPIO22_GPIO,	/* SPITZ_GPIO_HSYNC */
+	GPIO94_GPIO,	/* SPITZ_GPIO_CF_CD */
+	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
+	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /*
  * Spitz SCOOP Device #1
  */
@@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
 };
 
 static struct scoop_config spitz_scoop_setup = {
-	.io_dir 	= SPITZ_SCP_IO_DIR,
+	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
-	.suspend_clr = SPITZ_SCP_SUS_CLR,
-	.suspend_set = SPITZ_SCP_SUS_SET,
+	.suspend_clr	= SPITZ_SCP_SUS_CLR,
+	.suspend_set	= SPITZ_SCP_SUS_SET,
+	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
 struct platform_device spitzscoop_device = {
@@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
 };
 
 static struct scoop_config spitz_scoop2_setup = {
-	.io_dir 	= SPITZ_SCP2_IO_DIR,
+	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
-	.suspend_clr = SPITZ_SCP2_SUS_CLR,
-	.suspend_set = SPITZ_SCP2_SUS_SET,
+	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
+	.suspend_set	= SPITZ_SCP2_SUS_SET,
+	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
 struct platform_device spitzscoop2_device = {
@@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 
 	if (new_cpr & 0x0007) {
-	        set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
 		if (!(cpr & 0x0002) && !(cpr & 0x0004))
 		        mdelay(5);
 		if (device == SPITZ_PWR_CF)
@@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
 			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
 		        mdelay(1);
-		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 		} else {
 		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 		}
 	}
 }
 
-static void spitz_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |	GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
-	GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
@@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
 	.devs         = &spitz_pcmcia_scoop[0],
 	.num_devs     = 2,
-	.pcmcia_init  = spitz_pcmcia_init,
 	.power_ctrl   = spitz_pcmcia_pwr,
 };
 
 EXPORT_SYMBOL(spitzscoop_device);
 EXPORT_SYMBOL(spitzscoop2_device);
 
-
 /*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
  */
-struct platform_device spitzssp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &spitzscoop_device.dev,
-	},
+static struct platform_device spitzkbd_device = {
+	.name		= "spitz-keyboard",
 	.id		= -1,
 };
 
-struct corgissp_machinfo spitz_ssp_machinfo = {
-	.port		= 2,
-	.cs_lcdcon	= SPITZ_GPIO_LCDCON_CS,
-	.cs_ads7846	= SPITZ_GPIO_ADS7846_CS,
-	.cs_max1111	= SPITZ_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 520,
-	.clk_ads7846	= 14,
-	.clk_max1111	= 56,
-};
-
 
 /*
- * Spitz Backlight Device
+ * Spitz LEDs
  */
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
-	.name = "corgi-bl",
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.max_intensity = 0x2f,
-	.kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.platform_data	= &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+	{
+		.name			= "spitz:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= SPITZ_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "spitz:green:hddactivity",
+		.default_trigger	= "ide-disk",
+		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
-	.id		= -1,
 };
 
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
-	.id		= -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+	.leds		= spitz_gpio_leds,
+	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-
-/*
- * Spitz LEDs
- */
 static struct platform_device spitzled_device = {
-	.name		= "spitz-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitz_gpio_leds_info,
+	},
 };
 
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
 
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= SPITZ_GPIO_TP_INT,
+};
 
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
 {
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+	.cs_control		= spitz_ads7846_cs,
+};
 
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+	void (*kick_batt)(void);
 
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
-	if (!spitz_pxafb_dev) {
-		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-		if (!spitz_pxafb_dev)
-			return 0;
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
 	}
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
-	if (!get_hsync_invperiod)
-#endif
-		return 0;
-
-	return get_hsync_invperiod(spitz_pxafb_dev);
 }
 
-static void spitz_put_hsync(void)
-{
-	put_device(spitz_pxafb_dev);
-	if (get_hsync_invperiod)
-		symbol_put(pxafb_get_hsync_time);
-	spitz_pxafb_dev = NULL;
-	get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
+	.kick_battery		= spitz_bl_kick_battery,
+};
 
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
 {
-	sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct resource spitzts_resources[] = {
-	[0] = {
-		.start		= SPITZ_IRQ_GPIO_TP_INT,
-		.end		= SPITZ_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+	.cs_control	= spitz_lcdcon_cs,
 };
 
-static struct corgits_machinfo  spitz_ts_machinfo = {
-	.get_hsync_invperiod = spitz_get_hsync_invperiod,
-	.put_hsync           = spitz_put_hsync,
-	.wait_hsync          = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+	.cs_control	= spitz_max1111_cs,
 };
 
-static struct platform_device spitzts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
- 		.parent = &spitzssp_device.dev,
-		.platform_data	= &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.platform_data	= &spitz_ads7846_info,
+		.controller_data= &spitz_ads7846_chip,
+		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 2,
+		.chip_select	= 1,
+		.platform_data	= &spitz_lcdcon_info,
+		.controller_data= &spitz_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 2,
+		.chip_select	= 2,
+		.controller_data= &spitz_max1111_chip,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(spitzts_resources),
-	.resource	= spitzts_resources,
 };
 
+static void __init spitz_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	if (machine_is_akita()) {
+		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+	}
+
+	pxa2xx_set_spi_info(2, &spitz_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA27x MMC controller	*/
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+	gpio_direction_input(SPITZ_GPIO_nSD_WP);
 
 	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			  IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_2;
+	}
+	return 0;
 
+err_free_2:
+	gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 
 static int spitz_mci_get_ro(struct device *dev)
 {
-	return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+	return gpio_get_value(SPITZ_GPIO_nSD_WP);
 }
 
 static void spitz_mci_exit(struct device *dev, void *data)
 {
 	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(SPITZ_GPIO_nSD_WP);
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
  */
 static int spitz_ohci_init(struct device *dev)
 {
-	/* Only Port 2 is connected */
-	pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
-	pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
-	/* Setup USB Port 2 Output Control Register */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-	GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+	int err;
 
-	UHCHR = (UHCHR) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+	err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+	if (err)
+		return err;
 
-	UHCRHDA |= UHCRHDA_NOCP;
+	/* Only Port 2 is connected
+	 * Setup USB Port 2 Output Control Register
+	 */
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
-	return 0;
+	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
 
@@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
+static int spitz_irda_startup(struct device *dev)
+{
+	int rc;
+
+	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+	if (rc)
+		goto err;
+
+	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(SPITZ_GPIO_IR_ON);
+err:
+	return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_IR_ON);
+}
+
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
 static void akita_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = spitz_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= spitz_irda_transceiver_mode,
+	.startup		= spitz_irda_startup,
+	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
  * Spitz PXA Framebuffer
  */
 
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on)
-		corgi_lcdtg_hw_init(var->xres);
-	else
-		corgi_lcdtg_suspend();
-}
-
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
 	.pixclock       = 19231,
@@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 	.modes          = &spitz_pxafb_modes[0],
 	.num_modes      = 2,
 	.fixed_modes    = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
-	.lccr3          = LCCR3_PixRsEdg | LCCR3_OutEnH,
-	.pxafb_lcd_power = spitz_lcd_power,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
 
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
-	&spitzssp_device,
 	&spitzkbd_device,
-	&spitzts_device,
-	&spitzbl_device,
 	&spitzled_device,
 };
 
@@ -548,63 +618,32 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
 	PMCR = 0x00;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
-	pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-	else
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-	if (intensity)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
 static void __init spitz_init(void)
 {
 	platform_scoop_config = &spitz_pcmcia_config;
 
-	spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
 	common_init();
 
 	platform_device_register(&spitzscoop2_device);
@@ -615,32 +654,17 @@ static void __init spitz_init(void)
 /*
  * Akita IO Expander
  */
-struct platform_device akitaioexp_device = {
-	.name		= "akita-ioexp",
-	.id		= -1,
+static struct pca953x_platform_data akita_ioexp = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via IO-Expander */
-	if (intensity & 0x0020)
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-	else
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-	if (intensity)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+	{
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_ioexp,
+	},
+};
 
 static void __init akita_init(void)
 {
@@ -649,11 +673,10 @@ static void __init akita_init(void)
 	/* We just pretend the second element of the array doesn't exist */
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
-	spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
 
-	platform_device_register(&akitaioexp_device);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
-	spitzscoop_device.dev.parent = &akitaioexp_device.dev;
 	common_init();
 }
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8a40505dfd28..53018db106ac 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
@@ -48,44 +47,35 @@ static void spitz_charger_init(void)
 
 static void spitz_measure_temp(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+	gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
 }
 
 static void spitz_charge(int on)
 {
 	if (on) {
 		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-			set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 1);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		} else {
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 0);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		}
 	} else {
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+		gpio_set_value(SPITZ_GPIO_JK_B, 0);
+		gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
 	}
 }
 
 static void spitz_discharge(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+	gpio_set_value(SPITZ_GPIO_JK_A, on);
 }
 
 /* HACK - For unknown reasons, accurate voltage readings are only made with a load
    on the power bus which the green led on spitz provides */
 static void spitz_discharge1(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
 static void spitz_presuspend(void)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9bd93c5f28b2..2c31ec725688 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -28,8 +28,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/ssp.h>
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 67e18509d7bf..f8a9a62959e5 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <mach/pxa-regs.h>
@@ -155,7 +155,7 @@ static void __init pxa_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		clock_tick_rate = 3686400;
 	else if (machine_is_mainstone())
 		clock_tick_rate = 3249600;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5dab30eafddc..130e37e4ebdd 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -50,6 +50,7 @@
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -772,7 +781,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
@@ -792,6 +801,8 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3ed757e6bcc8..a13dbf3c2c05 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 
@@ -31,7 +31,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,41 +39,148 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 
-/********************************************************************************************
+/*	comment out the following line if you want to use the
+ *	Standard UART from PXA for serial / irda transmission
+ *	and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,		/* DiskOnChip CS */
+	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
+	GPIO94_GPIO,		/* DOC lock */
+
+	GPIO78_nCS_2,		/* DM9000 CS */
+	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
+
+	GPIO79_nCS_3,		/* Logic CS */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* UART */
+	GPIO9_FFUART_CTS,
+	GPIO10_FFUART_DCD,
+	GPIO16_FFUART_TXD,
+	GPIO33_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO82_FFUART_DTR,
+	GPIO83_FFUART_RTS,
+	GPIO96_FFUART_RXD,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+#else
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+#endif
+	/* PCMCIA */
+	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
+	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO102_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* MultiMediaCard */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
+
+	/* USB OHCI */
+	GPIO88_USBH1_PWR,		/* USBHPWR1 */
+	GPIO89_USBH1_PEN,		/* USBHPEN1 */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+	/* SSP 2 */
+	GPIO14_SSP2_SFRM,
+	GPIO19_SSP2_SCLK,
+	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
  * ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
 static struct mtd_partition trizeps4_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
 		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
+	}, {
 		.name =		"Backup",
 		.offset =	0x00040000,
 		.size =		0x00040000,
-	},{
+	}, {
 		.name =		"Image",
 		.offset =	0x00080000,
 		.size =		0x01080000,
-	},{
+	}, {
 		.name =		"IPSM",
 		.offset =	0x01100000,
 		.size =		0x00e00000,
-	},{
+	}, {
 		.name =		"Registry",
 		.offset =	0x01f00000,
 		.size =		MTDPART_SIZ_FULL,
@@ -105,9 +211,9 @@ static struct platform_device flash_device = {
 	.num_resources = 1,
 };
 
-/********************************************************************************************
+/****************************************************************************
  * DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= TRIZEPS4_ETH_PHYS+0x300,
@@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+static struct dm9000_plat_data tri_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
 static struct platform_device dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm9000_resources),
 	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &tri_dm9000_platdata,
+	}
 };
 
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
-	/* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
 	{
-		0,
-	},
-#else
-	/* this uses the generic 8520 driver */
-	[0] = {
-		.membase	= (void *)&FFUART,
-		.irq		= IRQ_FFUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
-	},
-	[1] = {
-		.membase	= (void *)&BTUART,
-		.irq		= IRQ_BTUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
+		.name = "led0:orange:heartbeat",	/* */
+		.default_trigger = "heartbeat",
+		.gpio = GPIO_HEARTBEAT_LED,
+		.active_low = 1,
 	},
 	{
-		0,
+		.name = "led1:yellow:cpubusy",		/* */
+		.default_trigger = "cpu-busy",
+		.gpio = GPIO_SYS_BUSY_LED,
+		.active_low = 1,
 	},
 #endif
 };
 
-static struct platform_device uart_devices = {
-	.name		= "serial8250",
-	.id		= 0,
+static struct gpio_led_platform_data trizeps4_led_data = {
+	.leds		= trizeps4_led,
+	.num_leds	= ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
-		.platform_data	= tri_serial_ports,
+		.platform_data	= &trizeps4_led_data,
 	},
-	.num_resources	= 0,
-	.resource	= NULL,
 };
 
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
 	&flash_device,
-	&uart_devices,
 	&dm9000_device,
+	&leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+	&flash_device,
+	&leds_devices,
 };
 
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 static short trizeps_conxs_bcr;
 
 /* PCCARD power switching supports only 3,3V */
@@ -192,108 +299,63 @@ void board_pcmcia_power(int power)
 		/* switch power on, put in reset and enable buffers */
 		trizeps_conxs_bcr |= power;
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+		BCR_writew(trizeps_conxs_bcr);
 		/* wait a little */
 		udelay(2000);
 		/* take reset away */
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(2000);
 	} else {
 		/* put in reset */
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		ConXS_BCR = trizeps_conxs_bcr;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(1000);
 		/* switch power off */
-		trizeps_conxs_bcr &= ~(0xf);
-		ConXS_BCR = trizeps_conxs_bcr;
-
+		trizeps_conxs_bcr &= ~0xf;
+		BCR_writew(trizeps_conxs_bcr);
 	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+			trizeps_conxs_bcr);
 }
+EXPORT_SYMBOL(board_pcmcia_power);
 
 /* backlight power switching for LCD panel */
 static void board_backlight_power(int on)
 {
-	if (on) {
+	if (on)
 		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	} else {
+	else
 		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
-	ConXS_BCR = trizeps_conxs_bcr;
-}
 
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME fill in values here */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME fill in values here */
-	}
-}
-
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		/* Slow mode */
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
-	} else if (mode & IR_FIRMODE) {
-		/* Fast mode */
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	} else {
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	}
-	/* FIXME write values to register */
-	local_irq_restore(flags);
+	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+			trizeps_conxs_bcr);
+	BCR_writew(trizeps_conxs_bcr);
 }
 
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power)	{;}
-#define board_backlight_power		NULL
-#define board_mci_power			NULL
-#define board_irda_mode			NULL
-
-#endif		/* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
 
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+		void *data)
 {
 	int err;
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 
 	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING,
-			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
+		IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+		"MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+						"MMC card detect IRQ\n");
+		return -1;
+	}
+	return 0;
 }
 
 static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay	= 1,
 	.init 		= trizeps4_mci_init,
 	.exit		= trizeps4_mci_exit,
-	.setpower 	= board_mci_power,
+	.get_ro		= NULL,	/* write-protection not supported */
+	.setpower 	= NULL,	/* power-switching not supported */
 };
 
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
 
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
 {
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
 	return 0;
 }
 
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+	trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 {
-	;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Switch mode */
+	if (mode & IR_SIRMODE)
+		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
+	else if (mode & IR_FIRMODE) {
+		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
+
+	/* Switch power */
+	if (mode & IR_OFF)
+		trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	else
+		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+	IRCR_writew(trizeps_conxs_ircr);
+	local_irq_restore(flags);
+
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= trizeps4_irda_transceiver_mode,
+	.startup		= trizeps4_irda_startup,
+	.shutdown		= trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= trizeps4_ohci_init,
-	.exit		= trizeps4_ohci_exit,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
 };
 
 static struct pxafb_mode_info sharp_lcd_mode = {
-    .pixclock		= 78000,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 4,
-    .left_margin	= 4,
-    .right_margin	= 4,
-    .vsync_len		= 2,
-    .upper_margin	= 0,
-    .lower_margin	= 0,
-    .sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-    .cmap_greyscale	= 0,
+	.pixclock	= 78000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 4,
+	.left_margin	= 4,
+	.right_margin	= 4,
+	.vsync_len	= 2,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info sharp_lcd = {
-    .modes		= &sharp_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
-    .lccr3		= 0x0340ff02,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &sharp_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static struct pxafb_mode_info toshiba_lcd_mode = {
-    .pixclock		= 39720,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 63,
-    .left_margin	= 12,
-    .right_margin	= 12,
-    .vsync_len		= 4,
-    .upper_margin	= 32,
-    .lower_margin	= 10,
-    .sync		= 0,
-    .cmap_greyscale	= 0,
+	.pixclock	= 39720,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 63,
+	.left_margin	= 12,
+	.right_margin	= 12,
+	.vsync_len	= 4,
+	.upper_margin	= 32,
+	.lower_margin	= 10,
+	.sync		= 0,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info toshiba_lcd = {
-    .modes		= &toshiba_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Act,
-    .lccr3		= 0x03400002,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &toshiba_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static void __init trizeps4_init(void)
 {
-	platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+	if (machine_is_trizeps4wl()) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+		platform_add_devices(trizeps4wl_devices,
+					ARRAY_SIZE(trizeps4wl_devices));
+	} else {
+		platform_add_devices(trizeps4_devices,
+					ARRAY_SIZE(trizeps4_devices));
+	}
 
-/*	set_pxa_fb_info(&sharp_lcd); */
-	set_pxa_fb_info(&toshiba_lcd);
+	if (0)	/* dont know how to determine LCD */
+		set_pxa_fb_info(&sharp_lcd);
+	else
+		set_pxa_fb_info(&toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
 	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
 	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 	pxa_set_ac97_info(NULL);
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	/* for DiskOnChip */
-	pxa_gpio_mode(GPIO15_nCS_1_MD);
-
-	/* for off-module PIC on ConXS board */
-	pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
-	/* UCB1400 irq */
-	pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
-	/* for DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
-	/* for PCMCIA device */
-	pxa_gpio_mode(GPIO_PCD | GPIO_IN);
-	pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
-	/* for I2C adapter */
-	pxa_gpio_mode(GPIO117_I2CSCL_MD);
-	pxa_gpio_mode(GPIO118_I2CSDA_MD);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, trizeps4_i2c_devices,
+					ARRAY_SIZE(trizeps4_i2c_devices));
 
-	/* MMC_DET s.o. */
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
-	/* whats that for ??? */
-	pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
-	pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-	pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 #ifdef CONFIG_IDE_PXA_CF
 	/* if boot direct from compact flash dont disable power */
 	trizeps_conxs_bcr = 0x0009;
@@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void)
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
 #endif
-	ConXS_BCR = trizeps_conxs_bcr;
-#endif
+	BCR_writew(trizeps_conxs_bcr);
+	board_backlight_power(1);
+}
+
+static void __init trizeps4_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-#warning FIXME - accessing PM registers directly is deprecated
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
+	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+		/* if flash is 16 bit wide its a Trizeps4 WL */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+		trizeps4_flash_data[0].width = 2;
+	} else {
+		/* if flash is 32 bit wide its a Trizeps4 */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4;
+		trizeps4_flash_data[0].width = 4;
+	}
 }
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+	/* MAINTAINER("Jürgen Schindele") */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.init_machine	= trizeps4_init,
+	.map_io		= trizeps4_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 000000000000..4b3120dbc049
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,983 @@
+/*
+ *  linux/arch/arm/mach-pxa/viper.c
+ *
+ *  Support for the Arcom VIPER SBC.
+ *
+ *  Author:	Ian Campbell
+ *  Created:    Feb 03, 2003
+ *  Copyright:  Arcom Control Systems
+ *
+ *  Maintained by Marc Zyngier <maz@misterjones.org>
+ *                             <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/bitfield.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/viper.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+	icr |= bit;
+	VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+	icr &= ~bit;
+	VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+void viper_cf_rst(int state)
+{
+	if (state)
+		viper_icr_set_bit(VIPER_ICR_CF_RST);
+	else
+		viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+EXPORT_SYMBOL(viper_cf_rst);
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+	u8 v1, v2;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	VIPER_VERSION = 0;
+	v1 = VIPER_VERSION;
+	VIPER_VERSION = 0xff;
+	v2 = VIPER_VERSION;
+
+	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+	local_irq_restore(flags);
+	return v1;
+}
+
+/* CPU sysdev */
+static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	viper_icr_set_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static int viper_cpu_resume(struct sys_device *sysdev)
+{
+	viper_icr_clear_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static struct sysdev_driver viper_cpu_sysdev_driver = {
+	.suspend	= viper_cpu_suspend,
+	.resume		= viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+	int i = 0;
+	unsigned int divisor = 0;
+	const char *v;
+
+	if (khz < 200000) {
+		v = "1.0"; divisor = 0xfff;
+	} else if (khz < 300000) {
+		v = "1.1"; divisor = 0xde5;
+	} else {
+		v = "1.3"; divisor = 0x325;
+	}
+
+	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+		 v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+	do {
+		int step;
+
+		if (force)
+			step = divisor;
+		else if (current_voltage_divisor < divisor - STEP)
+			step = current_voltage_divisor + STEP;
+		else if (current_voltage_divisor > divisor + STEP)
+			step = current_voltage_divisor - STEP;
+		else
+			step = divisor;
+		force = 0;
+
+		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		}
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		current_voltage_divisor = step;
+	} while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+static const int viper_isa_irq_map[] = {
+	0,		/* ISA irq #0, invalid */
+	0,		/* ISA irq #1, invalid */
+	0,		/* ISA irq #2, invalid */
+	1 << 0,		/* ISA irq #3 */
+	1 << 1,		/* ISA irq #4 */
+	1 << 2,		/* ISA irq #5 */
+	1 << 3,		/* ISA irq #6 */
+	1 << 4,		/* ISA irq #7 */
+	0,		/* ISA irq #8, invalid */
+	1 << 8,		/* ISA irq #9 */
+	1 << 5,		/* ISA irq #10 */
+	1 << 6,		/* ISA irq #11 */
+	1 << 7,		/* ISA irq #12 */
+	0,		/* ISA irq #13, invalid */
+	1 << 9,		/* ISA irq #14 */
+	1 << 10,	/* ISA irq #15 */
+};
+
+static inline int viper_irq_to_bitmask(unsigned int irq)
+{
+	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int viper_bit_to_irq(int bit)
+{
+	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void viper_ack_irq(unsigned int irq)
+{
+	int viper_irq = viper_irq_to_bitmask(irq);
+
+	if (viper_irq & 0xff)
+		VIPER_LO_IRQ_STATUS = viper_irq;
+	else
+		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
+}
+
+static void viper_mask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(irq));
+}
+
+static void viper_unmask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask |= viper_irq_to_bitmask(irq);
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+			viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending;
+
+	pending = viper_irq_pending();
+	do {
+		/* we're in a chained irq handler,
+		 * so ack the interrupt by hand */
+		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+
+		if (likely(pending)) {
+			irq = viper_bit_to_irq(__ffs(pending));
+			generic_handle_irq(irq);
+		}
+		pending = viper_irq_pending();
+	} while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+	.name	= "ISA",
+	.ack	= viper_ack_irq,
+	.mask	= viper_mask_irq,
+	.unmask	= viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+	int level;
+	int isa_irq;
+
+	pxa25x_init_irq();
+
+	/* setup ISA IRQs */
+	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
+		isa_irq = viper_bit_to_irq(level);
+		set_irq_chip(isa_irq, &viper_irq_chip);
+		set_irq_handler(isa_irq, handle_edge_irq);
+		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+				viper_irq_handler);
+	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+
+#ifndef CONFIG_SERIAL_PXA
+	/*
+	 * 8250 doesn't support IRQ_TYPE being passed as part
+	 * of the plat_serial8250_port structure...
+	 */
+	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
+#endif
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+	{
+		.pixclock	= 157500,
+
+		.xres		= 320,
+		.yres		= 240,
+
+		.bpp		= 16,
+
+		.hsync_len	= 63,
+		.left_margin	= 7,
+		.right_margin	= 13,
+
+		.vsync_len	= 20,
+		.upper_margin	= 0,
+		.lower_margin	= 0,
+
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info fb_info = {
+	.modes			= fb_mode_info,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+	int ret;
+
+	/* GPIO9 and 10 control FB backlight. Initialise to off */
+	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+	if (ret)
+		goto err_request_bckl;
+
+	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+	if (ret)
+		goto err_request_lcd;
+
+	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+	dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+	return ret;
+}
+
+static int viper_backlight_notify(int brightness)
+{
+	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+	return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+	gpio_free(VIPER_LCD_EN_GPIO);
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 1000000,
+	.init		= viper_backlight_init,
+	.notify		= viper_backlight_notify,
+	.exit		= viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent		= &pxa25x_device_pwm0.dev,
+		.platform_data	= &viper_backlight_data,
+	},
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start  = VIPER_ETH_PHYS + 0x300,
+		.end    = VIPER_ETH_PHYS + 0x30f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(VIPER_ETH_GPIO),
+		.end    = gpio_to_irq(VIPER_ETH_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+	[2] = {
+		.name	= "smc91x-data32",
+		.start  = VIPER_ETH_DATA_PHYS,
+		.end    = VIPER_ETH_DATA_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+	.dev		= {
+		.platform_data	= &viper_smc91x_info,
+	},
+};
+
+/* i2c */
+static struct i2c_gpio_platform_data i2c_bus_data = {
+	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
+	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
+	.udelay  = 10,
+	.timeout = 100,
+};
+
+static struct platform_device i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+	.dev = {
+		.platform_data = &i2c_bus_data,
+	}
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+	{
+		.start	= 0x40100000,
+		.end	= 0x4010001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40200000,
+		.end	= 0x4020001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40700000,
+		.end	= 0x4070001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTA_PHYS,
+		.end	= VIPER_UARTA_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTB_PHYS,
+		.end	= VIPER_UARTB_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+#else
+	{
+		0,
+	},
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+	/* Internal UARTs */
+	{
+		.membase	= (void *)&FFUART,
+		.mapbase	= __PREG(FFUART),
+		.irq		= IRQ_FFUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&BTUART,
+		.mapbase	= __PREG(BTUART),
+		.irq		= IRQ_BTUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&STUART,
+		.mapbase	= __PREG(STUART),
+		.irq		= IRQ_STUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	/* External UARTs */
+	{
+		.mapbase	= VIPER_UARTA_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+	{
+		.mapbase	= VIPER_UARTB_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+	.num_resources		= ARRAY_SIZE(viper_serial_resources),
+	.resource		= viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+	[0] = { /* DATA */
+		.start  = VIPER_USB_PHYS + 0,
+		.end    = VIPER_USB_PHYS + 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* ADDR */
+		.start  = VIPER_USB_PHYS + 2,
+		.end    = VIPER_USB_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = gpio_to_irq(VIPER_USB_GPIO),
+		.end    = gpio_to_irq(VIPER_USB_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+	/* Enable internal resistors on downstream ports */
+	.sel15Kres		= 1,
+	/* On-chip overcurrent protection */
+	.oc_enable		= 1,
+	/* INT output polarity */
+	.int_act_high		= 1,
+	/* INT edge or level triggered */
+	.int_edge_triggered	= 0,
+
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* .remote_wakeup_connected = 0, */
+	/* Wakeup by devices on usb bus enabled */
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources  	= ARRAY_SIZE(isp116x_resources),
+	.resource       	= isp116x_resources,
+	.dev			= {
+		.platform_data	= &isp116x_platform_data,
+	},
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+	[0] = {	/* RedBoot config + filesystem flash */
+		.start	= VIPER_FLASH_PHYS,
+		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* Boot flash */
+		.start	= VIPER_BOOT_PHYS,
+		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = { /*
+		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
+		 * (each byte is on a 16bit boundary).
+		 */
+		.start	= _VIPER_SRAM_BASE,
+		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+	.name		= "RedBoot",
+	.size		= SZ_1M,
+	.offset		= 0,
+	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+	[0] = {
+		.width		= 2,
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+	[1] = {
+		.width		= 2,
+		.parts		= &viper_boot_flash_partition,
+		.nr_parts	= 1,
+	},
+};
+
+static struct platform_device viper_mtd_devices[] = {
+	[0] = {
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data	= &viper_flash_data[0],
+		},
+		.resource	= &mtd_resources[0],
+		.num_resources	= 1,
+	},
+	[1] = {
+		.name		= "physmap-flash",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &viper_flash_data[1],
+		},
+		.resource	= &mtd_resources[1],
+		.num_resources	= 1,
+	},
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+	&smc91x_device,
+	&i2c_bus_device,
+	&serial_device,
+	&isp116x_device,
+	&viper_mtd_devices[0],
+	&viper_mtd_devices[1],
+	&viper_backlight_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+
+	/* FP Backlight */
+	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
+	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
+	GPIO16_PWM0_OUT,
+
+	/* Ethernet PHY Ready */
+	GPIO18_RDY,
+
+	/* Serial shutdown */
+	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
+
+	/* Compact-Flash / PC104 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
+	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
+	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
+
+	/* Integrated UPS control */
+	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
+
+	/* Vcc regulator control */
+	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
+	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
+	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
+
+	/* i2c busses */
+	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
+	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
+	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
+	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
+
+	/* PC/104 Interrupt */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+	strict_strtoul(str, 10, &viper_tpm);
+	return 1;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+static void __init viper_tpm_init(void)
+{
+	struct platform_device *tpm_device;
+	struct i2c_gpio_platform_data i2c_tpm_data = {
+		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
+		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
+		.udelay  = 10,
+		.timeout = 100,
+	};
+	char *errstr;
+
+	/* Allocate TPM i2c bus if requested */
+	if (!viper_tpm)
+		return;
+
+	tpm_device = platform_device_alloc("i2c-gpio", 2);
+	if (tpm_device) {
+		if (!platform_device_add_data(tpm_device,
+					      &i2c_tpm_data,
+					      sizeof(i2c_tpm_data))) {
+			if (platform_device_add(tpm_device)) {
+				errstr = "register TPM i2c bus";
+				goto error_free_tpm;
+			}
+		} else {
+			errstr = "allocate TPM i2c bus data";
+			goto error_free_tpm;
+		}
+	} else {
+		errstr = "allocate TPM i2c device";
+		goto error_tpm;
+	}
+
+	return;
+
+error_free_tpm:
+	kfree(tpm_device);
+error_tpm:
+	pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+		goto err_request_data;
+
+	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+		goto err_request_clk;
+
+	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+		goto err_request_cs;
+
+	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+		goto err_dir;
+
+	/* c/should assume redboot set the correct level ??? */
+	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+	gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+	gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+	pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+		goto err_request;
+
+	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+		goto err_dir;
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+	pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+				  unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	/* TODO: Adjust timings??? */
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (freq->old < freq->new) {
+			/* we are getting faster so raise the voltage
+			 * before we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (freq->old > freq->new) {
+			/* we are slowing down so drop the power
+			 * after we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_RESUMECHANGE:
+		viper_set_core_cpu_voltage(freq->new, 0);
+		break;
+	default:
+		/* ignore */
+		break;
+	}
+
+	return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+	.notifier_call  = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+				      CPUFREQ_TRANSITION_NOTIFIER))
+		pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+	pr_notice("Shutting off UPS\n");
+	gpio_set_value(VIPER_UPS_GPIO, 1);
+	/* Spin to death... */
+	while (1);
+}
+
+static void __init viper_init(void)
+{
+	u8 version;
+
+	pm_power_off = viper_power_off;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+	/* Wake-up serial console */
+	viper_init_serial_gpio();
+
+	set_pxa_fb_info(&fb_info);
+
+	/* v1 hardware cannot use the datacs line */
+	version = viper_hw_version();
+	if (version == 0)
+		smc91x_device.num_resources--;
+
+	pxa_set_i2c_info(NULL);
+	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+	viper_init_vcore_gpios();
+	viper_init_cpufreq();
+
+	sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+
+	if (version) {
+		pr_info("viper: hardware v%di%d detected. "
+			"CPLD revision %d.\n",
+			VIPER_BOARD_VERSION(version),
+			VIPER_BOARD_ISSUE(version),
+			VIPER_CPLD_REVISION(version));
+		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+			     (VIPER_BOARD_ISSUE(version) << 4) |
+			     VIPER_CPLD_REVISION(version);
+	} else {
+		pr_info("viper: No version register.\n");
+	}
+
+	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+	viper_tpm_init();
+	pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+	{
+		.virtual = VIPER_CPLD_BASE,
+		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
+		.length  = 0x00300000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = VIPER_PC104IO_BASE,
+		.pfn     = __phys_to_pfn(_PCMCIA1IO),
+		.length  = 0x00800000,
+		.type    = MT_DEVICE,
+	},
+};
+
+static void __init viper_map_io(void)
+{
+	pxa_map_io();
+
+	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+	PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= viper_map_io,
+	.init_irq	= viper_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine	= viper_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 0cb65b5772fe..813804433466 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -29,6 +29,7 @@
 #include <mach/pxafb.h>
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
+#include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 
@@ -423,6 +424,21 @@ static void __init zylonite_init_nand(void)
 static inline void zylonite_init_nand(void) {}
 #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+	pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -443,6 +459,7 @@ static void __init zylonite_init(void)
 	zylonite_init_keypad();
 	zylonite_init_nand();
 	zylonite_init_leds();
+	zylonite_init_ohci();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 095f5c648236..46538885a58a 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -73,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
 
+	/* SSP3 */
+	GPIO91_SSP3_SCLK,
+	GPIO92_SSP3_FRM,
+	GPIO93_SSP3_TXD,
+	GPIO94_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO26_GPIO,
 
@@ -113,6 +119,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
 
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -209,7 +219,7 @@ static struct pca953x_platform_data gpio_exp[] = {
 	},
 };
 
-struct i2c_board_info zylonite_i2c_board_info[] = {
+static struct i2c_board_info zylonite_i2c_board_info[] = {
 	{
 		.type		= "pca9539",
 		.addr		= 0x74,
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9879d7da2df5..0f244744daae 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -69,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
 
+	/* SSP3 */
+	GPIO89_SSP3_SCLK,
+	GPIO90_SSP3_FRM,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO15_GPIO,
 
@@ -117,6 +123,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
 
+	/* USB Host */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
 	/* Debug LEDs */
 	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
 	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,