[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 151 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 000000000000..65447549616f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,151 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ */
+#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN	0
+#define LCD_TYPE_MONO_STN	1
+#define LCD_TYPE_MONO_DSTN	2
+#define LCD_TYPE_COLOR_STN	3
+#define LCD_TYPE_COLOR_DSTN	4
+#define LCD_TYPE_COLOR_TFT	5
+#define LCD_TYPE_SMART_PANEL	6
+#define LCD_TYPE_MAX		7
+
+#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
+#define LCD_PCLK_EDGE_RISE	(0 << 18)
+#define LCD_PCLK_EDGE_FALL	(1 << 18)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			depth:8,
+			unused:23;
+
+	/* Parallel Mode Timing */
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+	struct pxafb_mode_info *modes;
+	unsigned int num_modes;
+
+	unsigned int	lcd_conn;
+
+	u_int		fixed_modes:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+	/* The following should be defined in LCCR4
+	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+	 *
+	 * All other bits in LCCR4 should be left alone.
+	 */
+	u_int		lccr4;
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+	void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);