ARM: orion5x: convert d2net to Device Tree

This commit converts the LaCie d2 Network platform to the Device Tree.

All devices except LEDs are converted, because the LED code needs a
non-LED GPIO to be set to a given value for the LEDs to work, and this
cannot yet be easily represented in DT.

Also, references to the LaCie Big Disk Network platform are lost,
because this platform apparently has exactly the same hardware support
as the LaCie d2 Network, so their Device Tree files would be
identical.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1398202002-28530-36-git-send-email-thomas.petazzoni@free-electrons.com
Cc: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

4 files changed, 113 insertions, 377 deletions

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 11b0c7ea44a2..3c4ad83c782a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -115,20 +115,13 @@ config MACH_MV2120
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
 
-config MACH_D2NET
-	bool "LaCie d2 Network"
-	select I2C_BOARDINFO
+config MACH_D2NET_DT
+	bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network NAS.
 
-config MACH_BIGDISK
-	bool "LaCie Big Disk Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Big Disk Network NAS.
-
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
 	select I2C_BOARDINFO
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index f40589466805..787dcee96806 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,8 +12,6 @@ obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
-obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
-obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
@@ -23,4 +21,5 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
+obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
 obj-$(CONFIG_MACH_RD88F5182_DT)	+= board-rd88f5182.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
new file mode 100644
index 000000000000..8a7284124153
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-orion5x/board-d2net.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	int err;
+
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
+
+	platform_device_register(&d2net_gpio_leds);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+void __init d2net_init(void)
+{
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+}
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
deleted file mode 100644
index 8f68b745c1d5..000000000000
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * arch/arm/mach-orion5x/d2net-setup.c
- *
- * LaCie d2Network and Big Disk Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie d2 Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define D2NET_NOR_BOOT_BASE		0xfff80000
-#define D2NET_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition d2net_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data d2net_nor_flash_data = {
-	.width		= 1,
-	.parts		= d2net_partitions,
-	.nr_parts	= ARRAY_SIZE(d2net_partitions),
-};
-
-static struct resource d2net_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= D2NET_NOR_BOOT_BASE,
-	.end			= D2NET_NOR_BOOT_BASE
-					+ D2NET_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device d2net_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &d2net_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &d2net_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip         | description
- * 0x32     | Ricoh 5C372b | RTC
- * 0x3e     | GMT G762     | PWM fan controller
- * 0x50     | HT24LC08     | eeprom (1kB)
- *
- * TODO: Add G762 support to the g760a driver.
- */
-static struct i2c_board_info __initdata d2net_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	}, {
-		I2C_BOARD_INFO("24c08", 0x50),
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_sata_data = {
-	.n_ports	= 2,
-};
-
-#define D2NET_GPIO_SATA0_POWER	3
-#define D2NET_GPIO_SATA1_POWER	12
-
-static void __init d2net_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA0 power GPIO\n");
-
-	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA1_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA1 power GPIO\n");
-}
-
-/*****************************************************************************
- * GPIO LED's
- ****************************************************************************/
-
-/*
- * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * led_off   | blink_ctrl | SATA active | LED state
- *           |            |             |
- *    1      |     x      |      x      |  off
- *    0      |     0      |      0      |  off
- *    0      |     1      |      0      |  blink (rate 300ms)
- *    0      |     x      |      1      |  on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- *        Red LED have priority.
- */
-
-#define D2NET_GPIO_RED_LED		6
-#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
-#define D2NET_GPIO_BLUE_LED_OFF		23
-
-static struct gpio_led d2net_leds[] = {
-	{
-		.name = "d2net:blue:sata",
-		.default_trigger = "default-on",
-		.gpio = D2NET_GPIO_BLUE_LED_OFF,
-		.active_low = 1,
-	},
-	{
-		.name = "d2net:red:fail",
-		.gpio = D2NET_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data d2net_led_data = {
-	.num_leds = ARRAY_SIZE(d2net_leds),
-	.leds = d2net_leds,
-};
-
-static struct platform_device d2net_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &d2net_led_data,
-	},
-};
-
-static void __init d2net_gpio_leds_init(void)
-{
-	int err;
-
-	/* Configure GPIO over MPP max number. */
-	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
-
-	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
-	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
-	}
-	if (err)
-		pr_err("d2net: failed to configure blue LED blink GPIO\n");
-
-	platform_device_register(&d2net_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_GPIO_PUSH_BUTTON		18
-#define D2NET_GPIO_POWER_SWITCH_ON	8
-#define D2NET_GPIO_POWER_SWITCH_OFF	9
-
-#define D2NET_SWITCH_POWER_ON		0x1
-#define D2NET_SWITCH_POWER_OFF		0x2
-
-static struct gpio_keys_button d2net_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_OFF,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
-		.desc		= "Power rocker switch (auto|off)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_ON,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
-		.desc		= "Power rocker switch (on|auto)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= D2NET_GPIO_PUSH_BUTTON,
-		.desc		= "Front Push Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data d2net_button_data = {
-	.buttons	= d2net_buttons,
-	.nbuttons	= ARRAY_SIZE(d2net_buttons),
-};
-
-static struct platform_device d2net_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_mpp_modes[] __initdata = {
-	MPP0_GPIO,	/* Board ID (bit 0) */
-	MPP1_GPIO,	/* Board ID (bit 1) */
-	MPP2_GPIO,	/* Board ID (bit 2) */
-	MPP3_GPIO,	/* SATA 0 power */
-	MPP4_UNUSED,
-	MPP5_GPIO,	/* Fan fail detection */
-	MPP6_GPIO,	/* Red front LED */
-	MPP7_UNUSED,
-	MPP8_GPIO,	/* Rear power switch (on|auto) */
-	MPP9_GPIO,	/* Rear power switch (auto|off) */
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_GPIO,	/* SATA 1 power */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	MPP16_GPIO,	/* Blue front LED blink control */
-	MPP17_UNUSED,
-	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
-	MPP19_UNUSED,
-	0,
-	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
-	/* 23: Blue front LED off */
-	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
-};
-
-#define D2NET_GPIO_INHIBIT_POWER_OFF    24
-
-static void __init d2net_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(d2net_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&d2net_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	d2net_sata_power_init();
-	orion5x_sata_init(&d2net_sata_data);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    D2NET_NOR_BOOT_BASE,
-				    D2NET_NOR_BOOT_SIZE);
-	platform_device_register(&d2net_nor_flash);
-
-	platform_device_register(&d2net_gpio_buttons);
-
-	d2net_gpio_leds_init();
-
-	pr_notice("d2net: Flash write are not yet supported.\n");
-
-	i2c_register_board_info(0, d2net_i2c_devices,
-				ARRAY_SIZE(d2net_i2c_devices));
-
-	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-
-#ifdef CONFIG_MACH_D2NET
-MACHINE_START(D2NET, "LaCie d2 Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BIGDISK
-MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-