Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

1 files changed, 0 insertions, 274 deletions

diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
deleted file mode 100644
index e105130ba51c..000000000000
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE	0xff800000
-#define MSS2_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MSS2_NOR_BOOT_BASE,
-	.end		= MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mss2_nor_flash_data,
-	},
-	.resource	= &mss2_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
-	.nr_controllers = 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
-	if (machine_is_mss2())
-		pci_common_init(&mss2_pci);
-
-	return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET	12
-#define MSS2_GPIO_KEY_POWER	11
-
-static struct gpio_keys_button mss2_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= MSS2_GPIO_KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_RESTART,
-		.gpio		= MSS2_GPIO_KEY_RESET,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
-	.buttons	= mss2_buttons,
-	.nbuttons	= ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mss2_button_data,
-	},
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ	3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
-	I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
-	u32 reg;
-
-	/*
-	 * Enable and issue soft reset
-	 */
-	reg = readl(RSTOUTn_MASK);
-	reg |= 1 << 2;
-	writel(reg, RSTOUTn_MASK);
-
-	reg = readl(CPU_SOFT_RESET);
-	reg |= 1;
-	writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED */
-	MPP1_GPIO,		/* Error LED */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC interrupt */
-	MPP4_GPIO,		/* HDD ind. (Single/Dual)*/
-	MPP5_GPIO,		/* HD0 5V control */
-	MPP6_GPIO,		/* HD0 12V control */
-	MPP7_GPIO,		/* HD1 5V control */
-	MPP8_GPIO,		/* HD1 12V control */
-	MPP9_UNUSED,
-	MPP10_GPIO,		/* Fan control */
-	MPP11_GPIO,		/* Power button */
-	MPP12_GPIO,		/* Reset button */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init mss2_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	orion5x_mpp_conf(mss2_mpp_modes);
-
-	/*
-	 * MPP[20] Unused
-	 * MPP[21] PCI clock
-	 * MPP[22] USB 0 over current
-	 * MPP[23] USB 1 over current
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&mss2_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&mss2_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    MSS2_NOR_BOOT_BASE,
-				    MSS2_NOR_BOOT_SIZE);
-	platform_device_register(&mss2_nor_flash);
-
-	platform_device_register(&mss2_button_device);
-
-	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
-		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
-			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
-		else
-			gpio_free(MSS2_GPIO_RTC_IRQ);
-	}
-	i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
-	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
-	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mss2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END