Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...

5 files changed, 126 insertions, 195 deletions

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3353b0a923d9..564bf80a2621 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -10,7 +10,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -28,13 +29,12 @@
 
 #include "common.h"
 #include "mmc.h"
+#include "usb-tusb6010.h"
 #include "soc.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4
-#define TUSB6010_GPIO_INT	58
-#define TUSB6010_GPIO_ENABLE	0
 #define TUSB6010_DMACHAN	0x3f
 
 #define NOKIA_N810_WIMAX	(1 << 2)
@@ -61,37 +61,6 @@ static void board_check_revision(void)
 }
 
 #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
-	int i, retval = 0;
-
-	if (state) {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
-		msleep(1);
-
-		/* Wait until TUSB6010 pulls INT pin down */
-		i = 100;
-		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
-			msleep(1);
-			i--;
-		}
-
-		if (!i) {
-			printk(KERN_ERR "tusb: powerup failed\n");
-			retval = -ENODEV;
-		}
-	} else {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
-		msleep(10);
-	}
-
-	return retval;
-}
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,
@@ -102,39 +71,36 @@ static struct musb_hdrc_config musb_config = {
 
 static struct musb_hdrc_platform_data tusb_data = {
 	.mode		= MUSB_OTG,
-	.set_power	= tusb_set_power,
 	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
 	.power		= 100,	/* Max 100 mA VBUS for host mode */
 	.config		= &musb_config,
 };
 
+static struct gpiod_lookup_table tusb_gpio_table = {
+	.dev_id = "musb-tusb",
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 0, "enable",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-48-63", 10, "int",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init n8x0_usb_init(void)
 {
 	int ret = 0;
-	static const char announce[] __initconst = KERN_INFO "TUSB 6010\n";
-
-	/* PM companion chip power control pin */
-	ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
-			       "TUSB6010 enable");
-	if (ret != 0) {
-		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
-		       TUSB6010_GPIO_ENABLE);
-		return;
-	}
-	tusb_set_power(0);
 
+	gpiod_add_lookup_table(&tusb_gpio_table);
 	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
-					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
-					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+				       TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+				       TUSB6010_DMACHAN);
 	if (ret != 0)
-		goto err;
+		return;
 
-	printk(announce);
+	pr_info("TUSB 6010\n");
 
 	return;
-
-err:
-	gpio_free(TUSB6010_GPIO_ENABLE);
 }
 #else
 
@@ -170,22 +136,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
  * GPIO23 and GPIO9		slot 2 EMMC on N810
  *
  */
-#define N8X0_SLOT_SWITCH_GPIO	96
-#define N810_EMMC_VSD_GPIO	23
-#define N810_EMMC_VIO_GPIO	9
-
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static int n8x0_mmc_switch_slot(struct device *dev, int slot)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Choose slot %d\n", slot + 1);
-#endif
-	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
-	return 0;
-}
+static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-80-111", 16,
+			    "switch", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot index 1, VSD power, GPIO 23 */
+		GPIO_LOOKUP_IDX("gpio-16-31", 7,
+				"vsd", 1, GPIO_ACTIVE_HIGH),
+		/* Slot index 1, VIO power, GPIO 9 */
+		GPIO_LOOKUP_IDX("gpio-0-15", 9,
+				"vsd", 1, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 					int power_on, int vdd)
@@ -256,31 +232,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 	return 0;
 }
 
-static void n810_set_power_emmc(struct device *dev,
-					 int power_on)
-{
-	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
-
-	if (power_on) {
-		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
-		msleep(1);
-		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
-		msleep(1);
-	} else {
-		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
-		msleep(50);
-		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
-		msleep(50);
-	}
-}
-
 static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
 			      int vdd)
 {
 	if (board_is_n800() || slot == 0)
 		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
 
-	n810_set_power_emmc(dev, power_on);
+	/* The n810 power will be handled by GPIO code in the driver */
 
 	return 0;
 }
@@ -418,13 +376,6 @@ static void n8x0_mmc_shutdown(struct device *dev)
 static void n8x0_mmc_cleanup(struct device *dev)
 {
 	menelaus_unregister_mmc_callback();
-
-	gpio_free(N8X0_SLOT_SWITCH_GPIO);
-
-	if (board_is_n810()) {
-		gpio_free(N810_EMMC_VSD_GPIO);
-		gpio_free(N810_EMMC_VIO_GPIO);
-	}
 }
 
 /*
@@ -433,7 +384,6 @@ static void n8x0_mmc_cleanup(struct device *dev)
  */
 static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots			= 0,
-	.switch_slot			= n8x0_mmc_switch_slot,
 	.init				= n8x0_mmc_late_init,
 	.cleanup			= n8x0_mmc_cleanup,
 	.shutdown			= n8x0_mmc_shutdown,
@@ -463,14 +413,9 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
-static struct gpio n810_emmc_gpios[] __initdata = {
-	{ N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vddf" },
-	{ N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vdd"  },
-};
-
 static void __init n8x0_mmc_init(void)
 {
-	int err;
+	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
 
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
@@ -483,20 +428,7 @@ static void __init n8x0_mmc_init(void)
 		 */
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
-	}
-
-	err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
-			       "MMC slot switch");
-	if (err)
-		return;
-
-	if (board_is_n810()) {
-		err = gpio_request_array(n810_emmc_gpios,
-					 ARRAY_SIZE(n810_emmc_gpios));
-		if (err) {
-			gpio_free(N8X0_SLOT_SWITCH_GPIO);
-			return;
-		}
+		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4afa2f08e668..fca7869c8075 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -244,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
-		omap_auxdata_legacy_init(dev);
 		fallthrough;
 	default:
 		od = to_omap_device(pdev);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 04208cc52784..c1c0121f478d 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,8 +6,8 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -41,7 +41,6 @@ struct pdata_init {
 };
 
 static struct of_dev_auxdata omap_auxdata_lookup[];
-static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
@@ -98,52 +97,43 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = {
 };
 #endif
 
-static int omap3_sbc_t3730_twl_callback(struct device *dev,
-					   unsigned gpio,
-					   unsigned ngpio)
+static void __init omap3_sbc_t3x_usb_hub_init(char *hub_name, int idx)
 {
-	int res;
+	struct gpio_desc *d;
 
-	res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-			       "wlan pwr");
-	if (res)
-		return res;
-
-	gpiod_export(gpio_to_desc(gpio), 0);
-
-	return 0;
-}
-
-static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
-{
-	int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
-
-	if (err) {
-		pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
-			hub_name, err);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get_index(NULL, "reset", idx, GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get T3x USB reset GPIO descriptor\n");
 		return;
 	}
-
-	gpiod_export(gpio_to_desc(gpio), 0);
-
+	gpiod_set_consumer_name(d, hub_name);
+	gpiod_export(d, 0);
 	udelay(10);
-	gpio_set_value(gpio, 1);
+	/* De-assert RESET */
+	gpiod_set_value(d, 0);
 	msleep(1);
 }
 
-static void __init omap3_sbc_t3730_twl_init(void)
-{
-	twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
-}
+static struct gpiod_lookup_table omap3_sbc_t3x_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-160-175", 7, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_sbc_t3530_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_evm_legacy_init(void)
@@ -187,31 +177,59 @@ static void __init am35xx_emac_reset(void)
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
 
-static struct gpio cm_t3517_wlan_gpios[] __initdata = {
-	{ 56,	GPIOF_OUT_INIT_HIGH,	"wlan pwr" },
-	{ 4,	GPIOF_OUT_INIT_HIGH,	"xcvr noe" },
+static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("gpio-48-53", 8, "power",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 4, "noe",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
 };
 
 static void __init omap3_sbc_t3517_wifi_init(void)
 {
-	int err = gpio_request_array(cm_t3517_wlan_gpios,
-				ARRAY_SIZE(cm_t3517_wlan_gpios));
-	if (err) {
-		pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
-		return;
-	}
+	struct gpio_desc *d;
+
+	gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table);
 
-	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
-	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "wlan pwr");
+		gpiod_export(d, 0);
+	}
 
+	d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "xcvr noe");
+		gpiod_export(d, 0);
+	}
 	msleep(100);
-	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
-}
+	gpiod_set_value(d, 0);
+}
+
+static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-144-159", 8, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-96-111", 2, "reset", 1,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3517_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
-	omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3517_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("cm-t3517 usb hub", 0);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 1);
 	am35xx_emac_reset();
 	hsmmc2_internal_input_clk();
 	omap3_sbc_t3517_wifi_init();
@@ -393,21 +411,6 @@ static struct ti_prm_platform_data ti_prm_pdata = {
 	.clkdm_lookup = clkdm_lookup,
 };
 
-/*
- * GPIOs for TWL are initialized by the I2C bus and need custom
- * handing until DSS has device tree bindings.
- */
-void omap_auxdata_legacy_init(struct device *dev)
-{
-	if (dev->platform_data)
-		return;
-
-	if (strcmp("twl4030-gpio", dev_name(dev)))
-		return;
-
-	dev->platform_data = &twl_gpio_auxdata;
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
 static struct omap_mcbsp_platform_data mcbsp_pdata;
 static void __init omap3_mcbsp_init(void)
@@ -428,9 +431,6 @@ static struct pdata_init auxdata_quirks[] __initdata = {
 	{ "nokia,n810", omap2420_n8x0_legacy_init, },
 	{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
-#endif
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 18fa52f828dc..b46c254c2bc4 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -11,12 +11,12 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/export.h>
 #include <linux/platform_data/usb-omap.h>
 
 #include <linux/usb/musb.h>
 
+#include "usb-tusb6010.h"
 #include "gpmc.h"
 
 static u8		async_cs, sync_cs;
@@ -132,10 +132,6 @@ static struct resource tusb_resources[] = {
 	{ /* Synchronous access */
 		.flags	= IORESOURCE_MEM,
 	},
-	{ /* IRQ */
-		.name	= "mc",
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
 static u64 tusb_dmamask = ~(u32)0;
@@ -154,9 +150,9 @@ static struct platform_device tusb_device = {
 
 /* this may be called only from board-*.c setup code */
 int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async, unsigned sync,
-		unsigned irq, unsigned dmachan)
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async, unsigned int sync,
+		unsigned int dmachan)
 {
 	int		status;
 	static char	error[] __initdata =
@@ -192,14 +188,6 @@ int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	if (status < 0)
 		return status;
 
-	/* IRQ */
-	status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
-	if (status < 0) {
-		printk(error, 3, status);
-		return status;
-	}
-	tusb_resources[2].start = gpio_to_irq(irq);
-
 	/* set up memory timings ... can speed them up later */
 	if (!ps_refclk) {
 		printk(error, 4, status);
diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h
new file mode 100644
index 000000000000..d210ff6238c2
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-tusb6010.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TUSB6010_H
+#define __USB_TUSB6010_H
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async_cs, unsigned int sync_cs,
+		unsigned int dmachan);
+
+#endif /* __USB_TUSB6010_H */