Merge branch 'late/clksrc' into late/cleanup

There is no reason to keep the clksrc cleanups separate from the
other cleanups, and this resolves some merge conflicts.

Conflicts:
	arch/arm/mach-spear/spear13xx.c
	drivers/irqchip/Makefile

32 files changed, 1014 insertions, 533 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 594c6335496e..23b004afa3f8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -428,16 +428,23 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = 57,
+		.vcc_gpio = -EINVAL,
+	},
+	{
+		.port = 2,
+		.reset_gpio = 61,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -589,6 +596,8 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 }
 
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 67447bd4564f..20d6d8189240 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = 126,
+		.vcc_gpio = -EINVAL,
+	},
+	{
+		.port = 2,
+		.reset_gpio = 61,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 126,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -199,6 +206,8 @@ static void __init omap_sdp_init(void)
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
 	enable_board_wakeup_source();
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 }
 
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7d3358b2e593..fc53911d0d13 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = GPIO_USB_NRESET,
+		.vcc_gpio = GPIO_USB_POWER,
+		.vcc_polarity = 1,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = GPIO_USB_NRESET,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 static struct mtd_partition crane_nand_partitions[] = {
@@ -131,13 +133,7 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
-			       "usb_ehci_enable");
-	if (ret < 0) {
-		pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
-		return;
-	}
-
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 2b9eb3de7aa6..d63f14b534b5 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -213,6 +213,14 @@ static __init void am3517_evm_mcbsp1_init(void)
 	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = 57,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -221,12 +229,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 #else
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -288,7 +290,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
-
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -300,6 +301,8 @@ static void __init am3517_evm_init(void)
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 710e99da266c..ee6218c74807 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -376,15 +376,22 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+		.vcc_gpio = -EINVAL,
+	},
+	{
+		.port = 2,
+		.reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
-	.reset_gpio_port[1]  = OMAP_MAX_GPIO_LINES + 7,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 static void  __init cm_t35_init_usbh(void)
@@ -401,6 +408,7 @@ static void  __init cm_t35_init_usbh(void)
 		msleep(1);
 	}
 
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 }
 
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a66da808cc4a..4eb5e6f2f7f5 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = HSUSB1_RESET_GPIO,
+		.vcc_gpio = -EINVAL,
+	},
+	{
+		.port = 2,
+		.reset_gpio = HSUSB2_RESET_GPIO,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
-	.reset_gpio_port[1]  = HSUSB2_RESET_GPIO,
-	.reset_gpio_port[2]  = -EINVAL,
 };
 
 static int __init cm_t3517_init_usbh(void)
@@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void)
 		msleep(1);
 	}
 
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&cm_t3517_ehci_pdata);
 
 	return 0;
@@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.init_late	= am35xx_init_late,
-	.init_time	= omap3_gp_gptimer_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 34944cfdfbd9..576420544178 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -415,15 +415,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e54a48060198..78813b397209 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap3_am33xx_gptimer_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e979d48270c9..b54562d1235e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
 	omap3_pmic_init("twl4030", &igep_twldata);
 }
 
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
-	.reset_gpio_port[1] = -EINVAL,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -642,8 +644,10 @@ static void __init igep_init(void)
 	if (machine_is_igep0020()) {
 		omap_display_init(&igep2_dss_data);
 		igep2_init_smsc911x();
+		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
 		usbhs_init(&igep2_usbhs_bdata);
 	} else {
+		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
 		usbhs_init(&igep3_usbhs_bdata);
 	}
 }
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 0ce91af753fa..6de78605c0af 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,6 +33,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
 
 static struct gpio_led gpio_leds[];
 
+/* PHY's VCC regulator might be added later, so flag that we need it */
+static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
+	.needs_vcc = true,
+};
+
+static struct usbhs_phy_data phy_data[] = {
+	{
+		.port = 2,
+		.reset_gpio = 147,
+		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
+		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
+		.platform_data = &hsusb2_phy_data,
+	},
+};
+
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	}
 	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
 
-	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
-			"nEN_USB_PWR");
+	/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
+	phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
+	phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
 
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	return 0;
 }
 
@@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 147,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -479,7 +489,7 @@ static int __init beagle_opp_init(void)
 
 	/* Initialize the omap3 opp table if not already created. */
 	r = omap3_opp_init();
-	if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
+	if (r < 0 && (r != -EEXIST)) {
 		pr_err("%s: opp default init failed\n", __func__);
 		return r;
 	}
@@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void)
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
+
 	usbhs_init(&usbhs_bdata);
+
 	board_nand_init(omap3beagle_nand_partitions,
 			ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
 			NAND_BUSWIDTH_16, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5eecc178f8bf..f76d0de7b406 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -466,7 +466,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
 	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
 	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+	REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"),	/* hsusb port 2 */
 	REGULATOR_SUPPLY("vaux2", NULL),
 };
 
@@ -509,17 +509,16 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = -1,	/* set at runtime */
+		.vcc_gpio = -EINVAL,
+	},
+};
 
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	/* PHY reset GPIO will be runtime programmed based on EVM version */
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -695,7 +694,7 @@ static void __init omap3_evm_init(void)
 
 		/* setup EHCI phy reset config */
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		usbhs_bdata.reset_gpio_port[1] = 21;
+		phy_data[0].reset_gpio = 21;
 
 		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
 		musb_board_data.power = 500;
@@ -703,10 +702,12 @@ static void __init omap3_evm_init(void)
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		usbhs_bdata.reset_gpio_port[1] = 135;
+		phy_data[0].reset_gpio = 135;
 	}
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
 			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 533180f8bf41..28133d5b4fed 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -351,7 +351,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+	REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"),	/* hsusb port 2 */
 };
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
@@ -566,6 +566,14 @@ fail:
 	printk(KERN_ERR "wl1251 board initialisation failed\n");
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = 16,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
@@ -574,15 +582,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 16,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -606,7 +606,10 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
+
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 5e63f0758cef..d37e6b187ae4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -346,19 +346,20 @@ static int __init omap3_stalker_i2c_init(void)
 
 #define OMAP3_STALKER_TS_GPIO	175
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = 21,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = 21,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -395,6 +396,8 @@ static void __init omap3_stalker_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index bcd44fbcd877..7da48bc42bbf 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = 147,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 147,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 static void omap3_touchbook_poweroff(void)
@@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void)
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
 			ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index b02c2f00609b..a71ad345f20d 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
 #include <linux/wl12xx.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
@@ -132,6 +133,22 @@ static struct platform_device btwilink_device = {
 	.id	= -1,
 };
 
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
+	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+	.clk_rate = 19200000,
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = GPIO_HUB_NRESET,
+		.vcc_gpio = GPIO_HUB_POWER,
+		.vcc_polarity = 1,
+		.platform_data = &hsusb1_phy_data,
+	},
+};
+
 static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
@@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = {
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset  = false,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
-	{ GPIO_HUB_POWER,	GPIOF_OUT_INIT_LOW,  "hub_power"  },
-	{ GPIO_HUB_NRESET,	GPIOF_OUT_INIT_LOW,  "hub_nreset" },
 };
 
 static void __init omap4_ehci_init(void)
 {
 	int ret;
-	struct clk *phy_ref_clk;
 
 	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
-	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
-	if (IS_ERR(phy_ref_clk)) {
-		pr_err("Cannot request auxclk3\n");
-		return;
-	}
-	clk_set_rate(phy_ref_clk, 19200000);
-	clk_prepare_enable(phy_ref_clk);
-
-	/* disable the power to the usb hub prior to init and reset phy+hub */
-	ret = gpio_request_array(panda_ehci_gpios,
-				 ARRAY_SIZE(panda_ehci_gpios));
-	if (ret) {
-		pr_err("Unable to initialize EHCI power/reset\n");
-		return;
-	}
-
-	gpio_export(GPIO_HUB_POWER, 0);
-	gpio_export(GPIO_HUB_NRESET, 0);
-	gpio_set_value(GPIO_HUB_NRESET, 1);
+	ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
+	if (ret)
+		pr_err("Failed to add main_clk alias to auxclk3_ck\n");
 
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
-
-	/* enable power to hub */
-	gpio_set_value(GPIO_HUB_POWER, 1);
 }
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f790ce5aaa34..4ca6b680aa72 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -428,14 +428,16 @@ static int __init overo_spi_init(void)
 	return 0;
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = OVERO_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
-	.reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -472,6 +474,8 @@ static void __init overo_init(void)
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
+
+	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
 	overo_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5e4d4c9fe61a..1a3dd865d8eb 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset		= true,
-	.reset_gpio_port[0]	= -EINVAL,
-	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
-	.reset_gpio_port[2]	= -EINVAL,
 };
 
 static void __init omap_zoom_init(void)
@@ -109,6 +111,8 @@ static void __init omap_zoom_init(void)
 	} else if (machine_is_omap_zoom3()) {
 		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+
+		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 		usbhs_init(&usbhs_bdata);
 	}
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e4ec3a69ee2e..2191f25ad21b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -596,7 +596,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
 		return -ENOENT;
 
 	r = clk_set_rate(mpurate_ck, mpurate);
-	if (IS_ERR_VALUE(r)) {
+	if (r < 0) {
 		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
 		     mpurate_ck_name, mpurate, r);
 		clk_put(mpurate_ck);
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d6ba13e1c540..272490e72ee0 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void);
 extern void omap2_sync32k_timer_init(void);
 extern void omap3_sync32k_timer_init(void);
 extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gp_gptimer_timer_init(void);
-extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
 extern void omap5_realtime_timer_init(void);
 
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index afc1e8c32d6c..d9c27195caf0 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime(
 	t.cs_wr_off = gpmc_t->cs_wr_off;
 	t.wr_cycle = gpmc_t->wr_cycle;
 
-	/* Configure GPMC */
-	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
-	else
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
-	gpmc_cs_configure(gpmc_nand_data->cs,
-			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
-	gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 		   struct gpmc_timings *gpmc_t)
 {
 	int err	= 0;
+	struct gpmc_settings s;
 	struct device *dev = &gpmc_nand_device.dev;
 
+	memset(&s, 0, sizeof(struct gpmc_settings));
+
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
 				(unsigned long *)&gpmc_nand_resource[0].start);
 	if (err < 0) {
-		dev_err(dev, "Cannot request GPMC CS\n");
+		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+			gpmc_nand_data->cs, err);
 		return err;
 	}
 
@@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 			return err;
 		}
-	}
 
-	/* Enable RD PIN Monitoring Reg */
-	if (gpmc_nand_data->dev_ready) {
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
+		if (gpmc_nand_data->of_node) {
+			gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+		} else {
+			s.device_nand = true;
+
+			/* Enable RD PIN Monitoring Reg */
+			if (gpmc_nand_data->dev_ready) {
+				s.wait_on_read = true;
+				s.wait_on_write = true;
+			}
+		}
+
+		if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+			s.device_width = GPMC_DEVWIDTH_16BIT;
+		else
+			s.device_width = GPMC_DEVWIDTH_8BIT;
+
+		err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+		if (err < 0)
+			goto out_free_cs;
+
+		err = gpmc_configure(GPMC_CONFIG_WP, 0);
+		if (err < 0)
+			goto out_free_cs;
 	}
 
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index fadd87435cd0..64b5a8346982 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = {
 	.resource	= &gpmc_onenand_resource,
 };
 
-static struct gpmc_timings omap2_onenand_calc_async_timings(void)
+static struct gpmc_settings onenand_async = {
+	.device_width	= GPMC_DEVWIDTH_16BIT,
+	.mux_add_data	= GPMC_MUX_AD,
+};
+
+static struct gpmc_settings onenand_sync = {
+	.burst_read	= true,
+	.burst_wrap	= true,
+	.burst_len	= GPMC_BURST_16,
+	.device_width	= GPMC_DEVWIDTH_16BIT,
+	.mux_add_data	= GPMC_MUX_AD,
+	.wait_pin	= 0,
+};
+
+static void omap2_onenand_calc_async_timings(struct gpmc_timings *t)
 {
 	struct gpmc_device_timings dev_t;
-	struct gpmc_timings t;
-
 	const int t_cer = 15;
 	const int t_avdp = 12;
 	const int t_aavdh = 7;
@@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
 
 	memset(&dev_t, 0, sizeof(dev_t));
 
-	dev_t.mux = true;
 	dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000;
 	dev_t.t_avdp_w = dev_t.t_avdp_r;
 	dev_t.t_aavdh = t_aavdh * 1000;
@@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
 	dev_t.t_wpl = t_wpl * 1000;
 	dev_t.t_wph = t_wph * 1000;
 
-	gpmc_calc_timings(&t, &dev_t);
-
-	return t;
-}
-
-static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
-{
-	/* Configure GPMC for asynchronous read */
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_DEVICESIZE_16 |
-			  GPMC_CONFIG1_MUXADDDATA);
-
-	return gpmc_cs_set_timings(cs, t);
+	gpmc_calc_timings(t, &onenand_async, &dev_t);
 }
 
 static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
@@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
 	return freq;
 }
 
-static struct gpmc_timings
-omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
-				int freq)
+static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
+					    unsigned int flags,
+					    int freq)
 {
 	struct gpmc_device_timings dev_t;
-	struct gpmc_timings t;
 	const int t_cer  = 15;
 	const int t_avdp = 12;
 	const int t_cez  = 20; /* max of t_cez, t_oez */
@@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
 	int div, gpmc_clk_ns;
 
-	if (cfg->flags & ONENAND_SYNC_READ)
+	if (flags & ONENAND_SYNC_READ)
 		onenand_flags = ONENAND_FLAG_SYNCREAD;
-	else if (cfg->flags & ONENAND_SYNC_READWRITE)
+	else if (flags & ONENAND_SYNC_READWRITE)
 		onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
 
 	switch (freq) {
@@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
 	/* Set synchronous read timings */
 	memset(&dev_t, 0, sizeof(dev_t));
 
-	dev_t.mux = true;
-	dev_t.sync_read = true;
+	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
+		onenand_sync.sync_read = true;
 	if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
-		dev_t.sync_write = true;
+		onenand_sync.sync_write = true;
+		onenand_sync.burst_write = true;
 	} else {
 		dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000;
 		dev_t.t_wpl = t_wpl * 1000;
@@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
 	dev_t.cyc_aavdh_oe = 1;
 	dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period;
 
-	gpmc_calc_timings(&t, &dev_t);
-
-	return t;
-}
-
-static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
-{
-	unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
-	unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
-
-	/* Configure GPMC for synchronous read */
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_WRAPBURST_SUPP |
-			  GPMC_CONFIG1_READMULTIPLE_SUPP |
-			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
-			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
-			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
-			  GPMC_CONFIG1_PAGE_LEN(2) |
-			  (cpu_is_omap34xx() ? 0 :
-				(GPMC_CONFIG1_WAIT_READ_MON |
-				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
-			  GPMC_CONFIG1_DEVICESIZE_16 |
-			  GPMC_CONFIG1_DEVICETYPE_NOR |
-			  GPMC_CONFIG1_MUXADDDATA);
-
-	return gpmc_cs_set_timings(cs, t);
+	gpmc_calc_timings(t, &onenand_sync, &dev_t);
 }
 
 static int omap2_onenand_setup_async(void __iomem *onenand_base)
@@ -298,12 +272,20 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
+	if (gpmc_onenand_data->of_node)
+		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+				      &onenand_async);
+
 	omap2_onenand_set_async_mode(onenand_base);
 
-	t = omap2_onenand_calc_async_timings();
+	omap2_onenand_calc_async_timings(&t);
+
+	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
+	if (ret < 0)
+		return ret;
 
-	ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
-	if (IS_ERR_VALUE(ret))
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	if (ret < 0)
 		return ret;
 
 	omap2_onenand_set_async_mode(onenand_base);
@@ -322,10 +304,26 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 		set_onenand_cfg(onenand_base);
 	}
 
-	t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+	if (gpmc_onenand_data->of_node) {
+		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+				      &onenand_sync);
+	} else {
+		/*
+		 * FIXME: Appears to be legacy code from initial ONENAND commit.
+		 * Unclear what boards this is for and if this can be removed.
+		 */
+		if (!cpu_is_omap34xx())
+			onenand_sync.wait_on_read = true;
+	}
+
+	omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq);
 
-	ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
-	if (IS_ERR_VALUE(ret))
+	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync);
+	if (ret < 0)
+		return ret;
+
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	if (ret < 0)
 		return ret;
 
 	set_onenand_cfg(onenand_base);
@@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
+	struct device *dev = &gpmc_onenand_device.dev;
 
 	gpmc_onenand_data = _onenand_data;
 	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
@@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 
 	if (cpu_is_omap24xx() &&
 			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
-		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n");
 		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
 		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 	}
@@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 	err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
 				(unsigned long *)&gpmc_onenand_resource.start);
 	if (err < 0) {
-		pr_err("%s: Cannot request GPMC CS\n", __func__);
+		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+			gpmc_onenand_data->cs, err);
 		return;
 	}
 
@@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 							ONENAND_IO_SIZE - 1;
 
 	if (platform_device_register(&gpmc_onenand_device) < 0) {
-		pr_err("%s: Unable to register OneNAND device\n", __func__);
+		dev_err(dev, "Unable to register OneNAND device\n");
 		gpmc_cs_free(gpmc_onenand_data->cs);
 		return;
 	}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 11d0b756f098..61a063595e66 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = {
 	.resource	= gpmc_smc91x_resources,
 };
 
+static struct gpmc_settings smc91x_settings = {
+	.device_width = GPMC_DEVWIDTH_16BIT,
+};
+
 /*
  * Set the gpmc timings for smc91c96. The timings are taken
  * from the data sheet available at:
@@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void)
 	const int t7 = 5;	/* Figure 12.4 write */
 	const int t8 = 5;	/* Figure 12.4 write */
 	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
-	u32 l;
-
-	l = GPMC_CONFIG1_DEVICESIZE_16;
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		l |= GPMC_CONFIG1_MUXADDDATA;
-	if (gpmc_cfg->flags & GPMC_READ_MON)
-		l |= GPMC_CONFIG1_WAIT_READ_MON;
-	if (gpmc_cfg->flags & GPMC_WRITE_MON)
-		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
-	if (gpmc_cfg->wait_pin)
-		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
-	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
 
 	/*
 	 * FIXME: Calculate the address and data bus muxed timings.
@@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void)
 	dev_t.t_cez_w = t4_w * 1000;
 	dev_t.t_wr_cycle = (t20 - t3) * 1000;
 
-	gpmc_calc_timings(&t, &dev_t);
+	gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
 
 	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
 }
@@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
 	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
 	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
 
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		smc91x_settings.mux_add_data = GPMC_MUX_AD;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		smc91x_settings.wait_on_read = true;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		smc91x_settings.wait_on_write = true;
+	if (gpmc_cfg->wait_pin)
+		smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
+	ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
+	if (ret < 0)
+		goto free1;
+
 	if (gpmc_cfg->retime) {
 		ret = gpmc_cfg->retime();
 		if (ret != 0)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 410e1bac7815..ed946df5ad8a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
 #include <linux/mtd/nand.h>
@@ -91,9 +92,7 @@
 #define GPMC_CS_SIZE		0x30
 #define	GPMC_BCH_SIZE		0x10
 
-#define GPMC_MEM_START		0x00000000
 #define GPMC_MEM_END		0x3FFFFFFF
-#define BOOT_ROM_SPACE		0x100000	/* 1MB */
 
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
@@ -107,6 +106,9 @@
 
 #define	GPMC_HAS_WR_ACCESS		0x1
 #define	GPMC_HAS_WR_DATA_MUX_BUS	0x2
+#define	GPMC_HAS_MUX_AAD		0x4
+
+#define GPMC_NR_WAITPINS		4
 
 /* XXX: Only NAND irq has been considered,currently these are the only ones used
  */
@@ -153,6 +155,7 @@ static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 /* Define chip-selects as reserved by default until probe completes */
 static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_nr_waitpins;
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
 	__raw_writel(val, reg_addr);
 }
 
-u32 gpmc_cs_read_reg(int cs, int idx)
+static u32 gpmc_cs_read_reg(int cs, int idx)
 {
 	void __iomem *reg_addr;
 
@@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 }
 
 /* TODO: Add support for gpmc_fck to clock framework and use it */
-unsigned long gpmc_get_fclk_period(void)
+static unsigned long gpmc_get_fclk_period(void)
 {
 	unsigned long rate = clk_get_rate(gpmc_l3_clk);
 
@@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void)
 	return rate;
 }
 
-unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
 {
 	unsigned long tick_ps;
 
@@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
 	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
 }
 
-unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
 {
 	unsigned long tick_ps;
 
@@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks)
 	return ticks * gpmc_get_fclk_period() / 1000;
 }
 
-unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
-{
-	unsigned long ticks = gpmc_ns_to_ticks(time_ns);
-
-	return ticks * gpmc_get_fclk_period() / 1000;
-}
-
 static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
 {
 	return ticks * gpmc_get_fclk_period();
@@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	return 0;
 }
 
-static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
 {
 	u32 l;
 	u32 mask;
 
+	/*
+	 * Ensure that base address is aligned on a
+	 * boundary equal to or greater than size.
+	 */
+	if (base & (size - 1))
+		return -EINVAL;
+
 	mask = (1 << GPMC_SECTION_SHIFT) - size;
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
 	l &= ~0x3f;
@@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
 	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
 	l |= GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+
+	return 0;
 }
 
 static void gpmc_cs_disable_mem(int cs)
@@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs)
 	return l & GPMC_CONFIG7_CSVALID;
 }
 
-int gpmc_cs_set_reserved(int cs, int reserved)
+static void gpmc_cs_set_reserved(int cs, int reserved)
 {
-	if (cs > GPMC_CS_NUM)
-		return -ENODEV;
-
 	gpmc_cs_map &= ~(1 << cs);
 	gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-
-	return 0;
 }
 
-int gpmc_cs_reserved(int cs)
+static bool gpmc_cs_reserved(int cs)
 {
-	if (cs > GPMC_CS_NUM)
-		return -ENODEV;
-
 	return gpmc_cs_map & (1 << cs);
 }
 
@@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs)
 	return r;
 }
 
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs:		chip-select to remap
+ * @base:	physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+	int ret;
+	u32 old_base, size;
+
+	if (cs > GPMC_CS_NUM)
+		return -ENODEV;
+	gpmc_cs_get_memconf(cs, &old_base, &size);
+	if (base == old_base)
+		return 0;
+	gpmc_cs_disable_mem(cs);
+	ret = gpmc_cs_delete_mem(cs);
+	if (ret < 0)
+		return ret;
+	ret = gpmc_cs_insert_mem(cs, base, size);
+	if (ret < 0)
+		return ret;
+	ret = gpmc_cs_enable_mem(cs, base, size);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 {
 	struct resource *res = &gpmc_cs_mem[cs];
@@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	if (r < 0)
 		goto out;
 
-	gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+	r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+	if (r < 0) {
+		release_resource(res);
+		goto out;
+	}
+
 	*base = res->start;
 	gpmc_cs_set_reserved(cs, 1);
 out:
@@ -561,16 +596,14 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 
 /**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
+ * gpmc_configure - write request to configure gpmc
  * @cmd: command type
  * @wval: value to write
  * @return status of the operation
  */
-int gpmc_cs_configure(int cs, int cmd, int wval)
+int gpmc_configure(int cmd, int wval)
 {
-	int err = 0;
-	u32 regval = 0;
+	u32 regval;
 
 	switch (cmd) {
 	case GPMC_ENABLE_IRQ:
@@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 		gpmc_write_reg(GPMC_CONFIG, regval);
 		break;
 
-	case GPMC_CONFIG_RDY_BSY:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-		if (wval)
-			regval |= WR_RD_PIN_MONITORING;
-		else
-			regval &= ~WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
-	case GPMC_CONFIG_DEV_SIZE:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* clear 2 target bits */
-		regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
-		/* set the proper value */
-		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
-	case GPMC_CONFIG_DEV_TYPE:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-		regval |= GPMC_CONFIG1_DEVICETYPE(wval);
-		if (wval == GPMC_DEVICETYPE_NOR)
-			regval |= GPMC_CONFIG1_MUXADDDATA;
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
 	default:
-		printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
-		err = -EINVAL;
+		pr_err("%s: command not supported\n", __func__);
+		return -EINVAL;
 	}
 
-	return err;
+	return 0;
 }
-EXPORT_SYMBOL(gpmc_cs_configure);
+EXPORT_SYMBOL(gpmc_configure);
 
 void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 {
@@ -716,7 +720,7 @@ static int gpmc_setup_irq(void)
 		return -EINVAL;
 
 	gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
-	if (IS_ERR_VALUE(gpmc_irq_start)) {
+	if (gpmc_irq_start < 0) {
 		pr_err("irq_alloc_descs failed\n");
 		return gpmc_irq_start;
 	}
@@ -781,16 +785,16 @@ static void gpmc_mem_exit(void)
 
 }
 
-static int gpmc_mem_init(void)
+static void gpmc_mem_init(void)
 {
-	int cs, rc;
-	unsigned long boot_rom_space = 0;
+	int cs;
 
-	/* never allocate the first page, to facilitate bug detection;
-	 * even if we didn't boot from ROM.
+	/*
+	 * The first 1MB of GPMC address space is typically mapped to
+	 * the internal ROM. Never allocate the first page, to
+	 * facilitate bug detection; even if we didn't boot from ROM.
 	 */
-	boot_rom_space = BOOT_ROM_SPACE;
-	gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+	gpmc_mem_root.start = SZ_1M;
 	gpmc_mem_root.end = GPMC_MEM_END;
 
 	/* Reserve all regions that has been set up by bootloader */
@@ -800,16 +804,12 @@ static int gpmc_mem_init(void)
 		if (!gpmc_cs_mem_enabled(cs))
 			continue;
 		gpmc_cs_get_memconf(cs, &base, &size);
-		rc = gpmc_cs_insert_mem(cs, base, size);
-		if (IS_ERR_VALUE(rc)) {
-			while (--cs >= 0)
-				if (gpmc_cs_mem_enabled(cs))
-					gpmc_cs_delete_mem(cs);
-			return rc;
+		if (gpmc_cs_insert_mem(cs, base, size)) {
+			pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
+				__func__, cs, base, base + size);
+			gpmc_cs_disable_mem(cs);
 		}
 	}
-
-	return 0;
 }
 
 static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
@@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
 
 /* XXX: can the cycles be avoided ? */
 static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
-				struct gpmc_device_timings *dev_t)
+				       struct gpmc_device_timings *dev_t,
+				       bool mux)
 {
-	bool mux = dev_t->mux;
 	u32 temp;
 
 	/* adv_rd_off */
@@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
 }
 
 static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
-				struct gpmc_device_timings *dev_t)
+					struct gpmc_device_timings *dev_t,
+					bool mux)
 {
-	bool mux = dev_t->mux;
 	u32 temp;
 
 	/* adv_wr_off */
@@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
 }
 
 static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
-				struct gpmc_device_timings *dev_t)
+					struct gpmc_device_timings *dev_t,
+					bool mux)
 {
-	bool mux = dev_t->mux;
 	u32 temp;
 
 	/* adv_rd_off */
@@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
 }
 
 static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
-				struct gpmc_device_timings *dev_t)
+					 struct gpmc_device_timings *dev_t,
+					 bool mux)
 {
-	bool mux = dev_t->mux;
 	u32 temp;
 
 	/* adv_wr_off */
@@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
 }
 
 static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
-			struct gpmc_device_timings *dev_t)
+				    struct gpmc_device_timings *dev_t,
+				    bool sync)
 {
 	u32 temp;
 
@@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
 				gpmc_t->cs_on + dev_t->t_ce_avd);
 	gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
 
-	if (dev_t->sync_write || dev_t->sync_read)
+	if (sync)
 		gpmc_calc_sync_common_timings(gpmc_t, dev_t);
 
 	return 0;
@@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
 }
 
 int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
-			struct gpmc_device_timings *dev_t)
+		      struct gpmc_settings *gpmc_s,
+		      struct gpmc_device_timings *dev_t)
 {
+	bool mux = false, sync = false;
+
+	if (gpmc_s) {
+		mux = gpmc_s->mux_add_data ? true : false;
+		sync = (gpmc_s->sync_read || gpmc_s->sync_write);
+	}
+
 	memset(gpmc_t, 0, sizeof(*gpmc_t));
 
-	gpmc_calc_common_timings(gpmc_t, dev_t);
+	gpmc_calc_common_timings(gpmc_t, dev_t, sync);
 
-	if (dev_t->sync_read)
-		gpmc_calc_sync_read_timings(gpmc_t, dev_t);
+	if (gpmc_s && gpmc_s->sync_read)
+		gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
 	else
-		gpmc_calc_async_read_timings(gpmc_t, dev_t);
+		gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
 
-	if (dev_t->sync_write)
-		gpmc_calc_sync_write_timings(gpmc_t, dev_t);
+	if (gpmc_s && gpmc_s->sync_write)
+		gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
 	else
-		gpmc_calc_async_write_timings(gpmc_t, dev_t);
+		gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
 
 	/* TODO: remove, see function definition */
 	gpmc_convert_ps_to_ns(gpmc_t);
@@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	return 0;
 }
 
+/**
+ * gpmc_cs_program_settings - programs non-timing related settings
+ * @cs:		GPMC chip-select to program
+ * @p:		pointer to GPMC settings structure
+ *
+ * Programs non-timing related settings for a GPMC chip-select, such as
+ * bus-width, burst configuration, etc. Function should be called once
+ * for each chip-select that is being used and must be called before
+ * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
+ * register will be initialised to zero by this function. Returns 0 on
+ * success and appropriate negative error code on failure.
+ */
+int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
+{
+	u32 config1;
+
+	if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
+		pr_err("%s: invalid width %d!", __func__, p->device_width);
+		return -EINVAL;
+	}
+
+	/* Address-data multiplexing not supported for NAND devices */
+	if (p->device_nand && p->mux_add_data) {
+		pr_err("%s: invalid configuration!\n", __func__);
+		return -EINVAL;
+	}
+
+	if ((p->mux_add_data > GPMC_MUX_AD) ||
+	    ((p->mux_add_data == GPMC_MUX_AAD) &&
+	     !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
+		pr_err("%s: invalid multiplex configuration!\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Page/burst mode supports lengths of 4, 8 and 16 bytes */
+	if (p->burst_read || p->burst_write) {
+		switch (p->burst_len) {
+		case GPMC_BURST_4:
+		case GPMC_BURST_8:
+		case GPMC_BURST_16:
+			break;
+		default:
+			pr_err("%s: invalid page/burst-length (%d)\n",
+			       __func__, p->burst_len);
+			return -EINVAL;
+		}
+	}
+
+	if ((p->wait_on_read || p->wait_on_write) &&
+	    (p->wait_pin > gpmc_nr_waitpins)) {
+		pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
+		return -EINVAL;
+	}
+
+	config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
+
+	if (p->sync_read)
+		config1 |= GPMC_CONFIG1_READTYPE_SYNC;
+	if (p->sync_write)
+		config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
+	if (p->wait_on_read)
+		config1 |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (p->wait_on_write)
+		config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (p->wait_on_read || p->wait_on_write)
+		config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
+	if (p->device_nand)
+		config1	|= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
+	if (p->mux_add_data)
+		config1	|= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
+	if (p->burst_read)
+		config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
+	if (p->burst_write)
+		config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
+	if (p->burst_read || p->burst_write) {
+		config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
+		config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
+	}
+
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
+
+	return 0;
+}
+
 #ifdef CONFIG_OF
 static struct of_device_id gpmc_dt_ids[] = {
 	{ .compatible = "ti,omap2420-gpmc" },
@@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
 
+/**
+ * gpmc_read_settings_dt - read gpmc settings from device-tree
+ * @np:		pointer to device-tree node for a gpmc child device
+ * @p:		pointer to gpmc settings structure
+ *
+ * Reads the GPMC settings for a GPMC child device from device-tree and
+ * stores them in the GPMC settings structure passed. The GPMC settings
+ * structure is initialised to zero by this function and so any
+ * previously stored settings will be cleared.
+ */
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+	memset(p, 0, sizeof(struct gpmc_settings));
+
+	p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
+	p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
+	p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
+	of_property_read_u32(np, "gpmc,device-width", &p->device_width);
+	of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
+
+	if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
+		p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
+		p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
+		p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
+		if (!p->burst_read && !p->burst_write)
+			pr_warn("%s: page/burst-length set but not used!\n",
+				__func__);
+	}
+
+	if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+		p->wait_on_read = of_property_read_bool(np,
+							"gpmc,wait-on-read");
+		p->wait_on_write = of_property_read_bool(np,
+							 "gpmc,wait-on-write");
+		if (!p->wait_on_read && !p->wait_on_write)
+			pr_warn("%s: read/write wait monitoring not enabled!\n",
+				__func__);
+	}
+}
+
 static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 						struct gpmc_timings *gpmc_t)
 {
-	u32 val;
+	struct gpmc_bool_timings *p;
+
+	if (!np || !gpmc_t)
+		return;
 
 	memset(gpmc_t, 0, sizeof(*gpmc_t));
 
 	/* minimum clock period for syncronous mode */
-	if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
-		gpmc_t->sync_clk = val;
+	of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
 
 	/* chip select timtings */
-	if (!of_property_read_u32(np, "gpmc,cs-on", &val))
-		gpmc_t->cs_on = val;
-
-	if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
-		gpmc_t->cs_rd_off = val;
-
-	if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
-		gpmc_t->cs_wr_off = val;
+	of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+	of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+	of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
 
 	/* ADV signal timings */
-	if (!of_property_read_u32(np, "gpmc,adv-on", &val))
-		gpmc_t->adv_on = val;
-
-	if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
-		gpmc_t->adv_rd_off = val;
-
-	if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
-		gpmc_t->adv_wr_off = val;
+	of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+	of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+	of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
 
 	/* WE signal timings */
-	if (!of_property_read_u32(np, "gpmc,we-on", &val))
-		gpmc_t->we_on = val;
-
-	if (!of_property_read_u32(np, "gpmc,we-off", &val))
-		gpmc_t->we_off = val;
+	of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+	of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
 
 	/* OE signal timings */
-	if (!of_property_read_u32(np, "gpmc,oe-on", &val))
-		gpmc_t->oe_on = val;
-
-	if (!of_property_read_u32(np, "gpmc,oe-off", &val))
-		gpmc_t->oe_off = val;
+	of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+	of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
 
 	/* access and cycle timings */
-	if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
-		gpmc_t->page_burst_access = val;
-
-	if (!of_property_read_u32(np, "gpmc,access", &val))
-		gpmc_t->access = val;
-
-	if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
-		gpmc_t->rd_cycle = val;
-
-	if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
-		gpmc_t->wr_cycle = val;
-
-	/* only for OMAP3430 */
-	if (!of_property_read_u32(np, "gpmc,wr-access", &val))
-		gpmc_t->wr_access = val;
-
-	if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
-		gpmc_t->wr_data_mux_bus = val;
+	of_property_read_u32(np, "gpmc,page-burst-access-ns",
+			     &gpmc_t->page_burst_access);
+	of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+	of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+	of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+	of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+			     &gpmc_t->bus_turnaround);
+	of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+			     &gpmc_t->cycle2cycle_delay);
+	of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+			     &gpmc_t->wait_monitoring);
+	of_property_read_u32(np, "gpmc,clk-activation-ns",
+			     &gpmc_t->clk_activation);
+
+	/* only applicable to OMAP3+ */
+	of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+	of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+			     &gpmc_t->wr_data_mux_bus);
+
+	/* bool timing parameters */
+	p = &gpmc_t->bool_timings;
+
+	p->cycle2cyclediffcsen =
+		of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+	p->cycle2cyclesamecsen =
+		of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+	p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+	p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+	p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+	p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+	p->time_para_granularity =
+		of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
 #ifdef CONFIG_MTD_NAND
@@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
 }
 #endif
 
+/**
+ * gpmc_probe_generic_child - configures the gpmc for a child device
+ * @pdev:	pointer to gpmc platform device
+ * @child:	pointer to device-tree node for child device
+ *
+ * Allocates and configures a GPMC chip-select for a child device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_generic_child(struct platform_device *pdev,
+				struct device_node *child)
+{
+	struct gpmc_settings gpmc_s;
+	struct gpmc_timings gpmc_t;
+	struct resource res;
+	unsigned long base;
+	int ret, cs;
+
+	if (of_property_read_u32(child, "reg", &cs) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(child, 0, &res) < 0) {
+		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	ret = gpmc_cs_request(cs, resource_size(&res), &base);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+		return ret;
+	}
+
+	/*
+	 * FIXME: gpmc_cs_request() will map the CS to an arbitary
+	 * location in the gpmc address space. When booting with
+	 * device-tree we want the NOR flash to be mapped to the
+	 * location specified in the device-tree blob. So remap the
+	 * CS to this location. Once DT migration is complete should
+	 * just make gpmc_cs_request() map a specific address.
+	 */
+	ret = gpmc_cs_remap(cs, res.start);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
+			cs, res.start);
+		goto err;
+	}
+
+	gpmc_read_settings_dt(child, &gpmc_s);
+
+	ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+	if (ret < 0)
+		goto err;
+
+	ret = gpmc_cs_program_settings(cs, &gpmc_s);
+	if (ret < 0)
+		goto err;
+
+	gpmc_read_timings_dt(child, &gpmc_t);
+	gpmc_cs_set_timings(cs, &gpmc_t);
+
+	if (of_platform_device_create(child, NULL, &pdev->dev))
+		return 0;
+
+	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+	ret = -ENODEV;
+
+err:
+	gpmc_cs_free(cs);
+
+	return ret;
+}
+
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 	if (!of_id)
 		return 0;
 
+	ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
+				   &gpmc_nr_waitpins);
+	if (ret < 0) {
+		pr_err("%s: number of wait pins not found!\n", __func__);
+		return ret;
+	}
+
 	for_each_node_by_name(child, "nand") {
 		ret = gpmc_probe_nand_child(pdev, child);
 		if (ret < 0) {
@@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 			return ret;
 		}
 	}
+
+	for_each_node_by_name(child, "nor") {
+		ret = gpmc_probe_generic_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	for_each_node_by_name(child, "ethernet") {
+		ret = gpmc_probe_generic_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
 	return 0;
 }
 #else
@@ -1364,25 +1596,37 @@ static int gpmc_probe(struct platform_device *pdev)
 	gpmc_dev = &pdev->dev;
 
 	l = gpmc_read_reg(GPMC_REVISION);
+
+	/*
+	 * FIXME: Once device-tree migration is complete the below flags
+	 * should be populated based upon the device-tree compatible
+	 * string. For now just use the IP revision. OMAP3+ devices have
+	 * the wr_access and wr_data_mux_bus register fields. OMAP4+
+	 * devices support the addr-addr-data multiplex protocol.
+	 *
+	 * GPMC IP revisions:
+	 * - OMAP24xx			= 2.0
+	 * - OMAP3xxx			= 5.0
+	 * - OMAP44xx/54xx/AM335x	= 6.0
+	 */
 	if (GPMC_REVISION_MAJOR(l) > 0x4)
 		gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+	if (GPMC_REVISION_MAJOR(l) > 0x5)
+		gpmc_capability |= GPMC_HAS_MUX_AAD;
 	dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
 		 GPMC_REVISION_MINOR(l));
 
-	rc = gpmc_mem_init();
-	if (IS_ERR_VALUE(rc)) {
-		clk_disable_unprepare(gpmc_l3_clk);
-		clk_put(gpmc_l3_clk);
-		dev_err(gpmc_dev, "failed to reserve memory\n");
-		return rc;
-	}
+	gpmc_mem_init();
 
-	if (IS_ERR_VALUE(gpmc_setup_irq()))
+	if (gpmc_setup_irq() < 0)
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
 
 	/* Now the GPMC is initialised, unreserve the chip-selects */
 	gpmc_cs_map = 0;
 
+	if (!pdev->dev.of_node)
+		gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+
 	rc = gpmc_probe_dt(pdev);
 	if (rc < 0) {
 		clk_disable_unprepare(gpmc_l3_clk);
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index fe0a844d5007..707f6d58edd5 100644
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -58,7 +58,7 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_MUXTYPE(val)       ((val & 3) << 8)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
 #define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
@@ -73,6 +73,13 @@
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
+#define GPMC_BURST_4			4	/* 4 word burst */
+#define GPMC_BURST_8			8	/* 8 word burst */
+#define GPMC_BURST_16			16	/* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
+#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
 
 /* bool type time settings */
 struct gpmc_bool_timings {
@@ -178,10 +185,6 @@ struct gpmc_device_timings {
 	u8 cyc_wpl;	/* write deassertion time in cycles */
 	u32 cyc_iaa;	/* initial access time in cycles */
 
-	bool mux;	/* address & data muxed */
-	bool sync_write;/* synchronous write */
-	bool sync_read;	/* synchronous read */
-
 	/* extra delays */
 	bool ce_xdelay;
 	bool avd_xdelay;
@@ -189,28 +192,40 @@ struct gpmc_device_timings {
 	bool we_xdelay;
 };
 
+struct gpmc_settings {
+	bool burst_wrap;	/* enables wrap bursting */
+	bool burst_read;	/* enables read page/burst mode */
+	bool burst_write;	/* enables write page/burst mode */
+	bool device_nand;	/* device is NAND */
+	bool sync_read;		/* enables synchronous reads */
+	bool sync_write;	/* enables synchronous writes */
+	bool wait_on_read;	/* monitor wait on reads */
+	bool wait_on_write;	/* monitor wait on writes */
+	u32 burst_len;		/* page/burst length */
+	u32 device_width;	/* device bus width (8 or 16 bit) */
+	u32 mux_add_data;	/* multiplex address & data */
+	u32 wait_pin;		/* wait-pin to be used */
+};
+
 extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
-				struct gpmc_device_timings *dev_t);
+			     struct gpmc_settings *gpmc_s,
+			     struct gpmc_device_timings *dev_t);
 
 extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
 
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
 extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
 
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
 extern int gpmc_calc_divider(unsigned int sync_clk);
 extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+				  struct gpmc_settings *p);
 
 #endif
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 381be7ac0c17..eeea4fa28fbc 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -131,7 +131,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	int oh_cnt, i, ret = 0;
 
 	oh_cnt = of_property_count_strings(node, "ti,hwmods");
-	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+	if (oh_cnt <= 0) {
 		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
 		return -ENODEV;
 	}
@@ -815,20 +815,17 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name)
 	}
 
 	oh = omap_hwmod_lookup(oh_name);
-	if (IS_ERR_OR_NULL(oh)) {
+	if (!oh) {
 		WARN(1, "%s: no hwmod for %s\n", __func__,
 			oh_name);
-		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+		return ERR_PTR(-ENODEV);
 	}
-	if (IS_ERR_OR_NULL(oh->od)) {
+	if (!oh->od) {
 		WARN(1, "%s: no omap_device for %s\n", __func__,
 			oh_name);
-		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+		return ERR_PTR(-ENODEV);
 	}
 
-	if (IS_ERR_OR_NULL(oh->od->pdev))
-		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
 	return &oh->od->pdev->dev;
 }
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5f33c2da6999..3f50f680372e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1662,7 +1662,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 		return -ENOSYS;
 
 	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
+	if (ret < 0)
 		return ret;
 
 	if (oh->clkdm) {
@@ -2412,7 +2412,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 	_init_mpu_rt_base(oh, NULL);
 
 	r = _init_clocks(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
+	if (r < 0) {
 		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1edd000a8143..0b339861d751 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -217,7 +217,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 		return 0;
 
 	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
-	if (!(IS_ERR_OR_NULL(d)))
+	if (d)
 		(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
 			(void *)pwrdm, &pwrdm_suspend_fops);
 
@@ -261,8 +261,8 @@ static int __init pm_dbg_init(void)
 		return 0;
 
 	d = debugfs_create_dir("pm_debug", NULL);
-	if (IS_ERR_OR_NULL(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -EINVAL;
 
 	(void) debugfs_create_file("count", S_IRUGO,
 		d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 89cad4a605dd..86babd740d41 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1180,7 +1180,7 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm)
 {
 	int i;
 
-	if (IS_ERR_OR_NULL(pwrdm)) {
+	if (!pwrdm) {
 		pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
 			 __func__);
 		return 1;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index d00d89c93f1c..fdf1c039062c 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -46,7 +46,6 @@
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
-#include <asm/arch_timer.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/counter-32k.h>
@@ -57,16 +56,6 @@
 #include "common.h"
 #include "powerdomain.h"
 
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE	"sys_ck"
-#define OMAP3_MPU_SOURCE	OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE	"sys_clkin_ck"
-#define OMAP5_MPU_SOURCE	"sys_clkin"
-#define OMAP2_32K_SOURCE	"func_32k_ck"
-#define OMAP3_32K_SOURCE	"omap_32k_fck"
-#define OMAP4_32K_SOURCE	"sys_32k_ck"
-
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET		0x14
@@ -130,7 +119,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_gpt = {
-	.name		= "gp_timer",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 300,
 	.set_next_event	= omap2_gp_timer_set_next_event,
@@ -171,6 +159,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 		if (property && !of_get_property(np, property, NULL))
 			continue;
 
+		if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
+				  of_get_property(np, "ti,timer-dsp", NULL) ||
+				  of_get_property(np, "ti,timer-pwm", NULL) ||
+				  of_get_property(np, "ti,timer-secure", NULL)))
+			continue;
+
 		of_add_property(np, &device_disabled);
 		return np;
 	}
@@ -215,16 +209,17 @@ static u32 __init omap_dm_timer_get_errata(void)
 }
 
 static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
-						int gptimer_id,
-						const char *fck_source,
-						const char *property,
-						int posted)
+					 const char *fck_source,
+					 const char *property,
+					 const char **timer_name,
+					 int posted)
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
 	const char *oh_name;
 	struct device_node *np;
 	struct omap_hwmod *oh;
 	struct resource irq, mem;
+	struct clk *src;
 	int r = 0;
 
 	if (of_have_populated_dt()) {
@@ -244,10 +239,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 		of_node_put(np);
 	} else {
-		if (omap_dm_timer_reserve_systimer(gptimer_id))
+		if (omap_dm_timer_reserve_systimer(timer->id))
 			return -ENODEV;
 
-		sprintf(name, "timer%d", gptimer_id);
+		sprintf(name, "timer%d", timer->id);
 		oh_name = name;
 	}
 
@@ -255,6 +250,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (!oh)
 		return -ENODEV;
 
+	*timer_name = oh->name;
+
 	if (!of_have_populated_dt()) {
 		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
 						   &irq);
@@ -277,24 +274,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	/* After the dmtimer is using hwmod these clocks won't be needed */
 	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
-		return -ENODEV;
+		return PTR_ERR(timer->fclk);
 
-	/* FIXME: Need to remove hard-coded test on timer ID */
-	if (gptimer_id != 12) {
-		struct clk *src;
-
-		src = clk_get(NULL, fck_source);
-		if (IS_ERR(src)) {
-			r = -EINVAL;
-		} else {
-			r = clk_set_parent(timer->fclk, src);
-			if (IS_ERR_VALUE(r))
-				pr_warn("%s: %s cannot set source\n",
-					__func__, oh->name);
+	src = clk_get(NULL, fck_source);
+	if (IS_ERR(src))
+		return PTR_ERR(src);
+
+	if (clk_get_parent(timer->fclk) != src) {
+		r = clk_set_parent(timer->fclk, src);
+		if (r < 0) {
+			pr_warn("%s: %s cannot set source\n", __func__,
+				oh->name);
 			clk_put(src);
+			return r;
 		}
 	}
 
+	clk_put(src);
+
 	omap_hwmod_setup_one(oh_name);
 	omap_hwmod_enable(oh);
 	__omap_dm_timer_init_regs(timer);
@@ -318,6 +315,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 {
 	int res;
 
+	clkev.id = gptimer_id;
 	clkev.errata = omap_dm_timer_get_errata();
 
 	/*
@@ -327,8 +325,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 	 */
 	__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
 
-	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
-				     OMAP_TIMER_POSTED);
+	res = omap_dm_timer_init_one(&clkev, fck_source, property,
+				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
 	omap2_gp_timer_irq.dev_id = &clkev;
@@ -342,8 +340,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 					3, /* Timer internal resynch latency */
 					0xffffffff);
 
-	pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
-		gptimer_id, clkev.rate);
+	pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
+		clkev.rate);
 }
 
 /* Clocksource code */
@@ -360,7 +358,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_gpt = {
-	.name		= "gp_timer",
 	.rating		= 300,
 	.read		= clocksource_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -443,13 +440,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 }
 
 static void __init omap2_gptimer_clocksource_init(int gptimer_id,
-						const char *fck_source)
+						  const char *fck_source,
+						  const char *property)
 {
 	int res;
 
+	clksrc.id = gptimer_id;
 	clksrc.errata = omap_dm_timer_get_errata();
 
-	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+	res = omap_dm_timer_init_one(&clksrc, fck_source, property,
+				     &clocksource_gpt.name,
 				     OMAP_TIMER_NONPOSTED);
 	BUG_ON(res);
 
@@ -462,8 +462,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 		pr_err("Could not register clocksource %s\n",
 			clocksource_gpt.name);
 	else
-		pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
-			gptimer_id, clksrc.rate);
+		pr_info("OMAP clocksource: %s at %lu Hz\n",
+			clocksource_gpt.name, clksrc.rate);
 }
 
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
@@ -488,7 +488,7 @@ static void __init realtime_counter_init(void)
 		pr_err("%s: ioremap failed\n", __func__);
 		return;
 	}
-	sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE);
+	sys_clk = clk_get(NULL, "sys_clkin");
 	if (IS_ERR(sys_clk)) {
 		pr_err("%s: failed to get system clock handle\n", __func__);
 		iounmap(base);
@@ -545,18 +545,19 @@ static inline void __init realtime_counter_init(void)
 #endif
 
 #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-			       clksrc_nr, clksrc_src)			\
+			       clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
 	if (omap_clk_init)						\
 		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
-	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
+	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
+					clksrc_prop);			\
 }
 
 #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-				clksrc_nr, clksrc_src)			\
+				clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
 	if (omap_clk_init)						\
@@ -565,33 +566,35 @@ void __init omap##name##_sync32k_timer_init(void)		\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
 	if (use_gptimer_clksrc)						\
-		omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\
+		omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,	\
+						clksrc_prop);		\
 	else								\
 		omap2_sync32k_clocksource_init();			\
 }
 
 #ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP2_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck", NULL);
 #endif /* CONFIG_ARCH_OMAP2 */
 
 #ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
-			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
-		       2, OMAP3_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck", NULL);
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
+			2, "timer_sys_ck", NULL);
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
-		       2, OMAP4_MPU_SOURCE);
-#endif /* CONFIG_SOC_AM33XX */
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
+		       1, "timer_sys_ck", "ti,timer-alwon");
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+			       2, "sys_clkin_ck", NULL);
+#endif
 
 #ifdef CONFIG_ARCH_OMAP4
-OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP4_MPU_SOURCE);
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
 void __init omap4_local_timer_init(void)
@@ -602,7 +605,7 @@ void __init omap4_local_timer_init(void)
 		int err;
 
 		if (of_have_populated_dt()) {
-			twd_local_timer_of_register();
+			clocksource_of_init();
 			return;
 		}
 
@@ -620,18 +623,12 @@ void __init omap4_local_timer_init(void)
 #endif /* CONFIG_ARCH_OMAP4 */
 
 #ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP5_MPU_SOURCE);
 void __init omap5_realtime_timer_init(void)
 {
-	int err;
-
-	omap5_sync32k_timer_init();
+	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	err = arch_timer_of_register();
-	if (err)
-		pr_err("%s: arch_timer_register failed %d\n", __func__, err);
+	clocksource_of_init();
 }
 #endif /* CONFIG_SOC_OMAP5 */
 
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 5706bdccf45e..aa27d7f5cbb7 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,8 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 }
 
 #endif
+
+/* Template for PHY regulators */
+static struct fixed_voltage_config hsusb_reg_config = {
+	/* .supply_name filled later */
+	.microvolts = 3300000,
+	.gpio = -1,		/* updated later */
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,	/* updated later */
+	.enabled_at_boot = 0,	/* keep in RESET */
+	/* .init_data filled later */
+};
+
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
+
+/**
+ * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
+ * @name: name for the regulator
+ * @dev_id: device id of the device this regulator supplies power to
+ * @dev_supply: supply name that the device expects
+ * @gpio: GPIO number
+ * @polarity: 1 - Active high, 0 - Active low
+ */
+static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
+						int gpio, int polarity)
+{
+	struct regulator_consumer_supply *supplies;
+	struct regulator_init_data *reg_data;
+	struct fixed_voltage_config *config;
+	struct platform_device *pdev;
+	int ret;
+
+	supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
+	if (!supplies)
+		return -ENOMEM;
+
+	supplies->supply = dev_supply;
+	supplies->dev_name = dev_id;
+
+	reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
+	if (!reg_data)
+		return -ENOMEM;
+
+	reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+	reg_data->consumer_supplies = supplies;
+	reg_data->num_consumer_supplies = 1;
+
+	config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+			GFP_KERNEL);
+	if (!config)
+		return -ENOMEM;
+
+	config->supply_name = name;
+	config->gpio = gpio;
+	config->enable_high = polarity;
+	config->init_data = reg_data;
+
+	/* create a regulator device */
+	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+	if (!pdev)
+		return -ENOMEM;
+
+	pdev->id = PLATFORM_DEVID_AUTO;
+	pdev->name = reg_name;
+	pdev->dev.platform_data = config;
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		pr_err("%s: Failed registering regulator %s for %s\n",
+				__func__, name, dev_id);
+
+	return ret;
+}
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+	char *rail_name;
+	int i, len;
+	struct platform_device *pdev;
+	char *phy_id;
+
+	/* the phy_id will be something like "nop_usb_xceiv.1" */
+	len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+	for (i = 0; i < num_phys; i++) {
+
+		if (!phy->port) {
+			pr_err("%s: Invalid port 0. Must start from 1\n",
+						__func__);
+			continue;
+		}
+
+		/* do we need a NOP PHY device ? */
+		if (!gpio_is_valid(phy->reset_gpio) &&
+			!gpio_is_valid(phy->vcc_gpio))
+			continue;
+
+		/* create a NOP PHY device */
+		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+		if (!pdev)
+			return -ENOMEM;
+
+		pdev->id = phy->port;
+		pdev->name = nop_name;
+		pdev->dev.platform_data = phy->platform_data;
+
+		phy_id = kmalloc(len, GFP_KERNEL);
+		if (!phy_id)
+			return -ENOMEM;
+
+		scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+					pdev->id);
+
+		if (platform_device_register(pdev)) {
+			pr_err("%s: Failed to register device %s\n",
+				__func__,  phy_id);
+			continue;
+		}
+
+		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+		/* Do we need RESET regulator ? */
+		if (gpio_is_valid(phy->reset_gpio)) {
+
+			rail_name = kmalloc(13, GFP_KERNEL);
+			if (!rail_name)
+				return -ENOMEM;
+
+			scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
+
+			usbhs_add_regulator(rail_name, phy_id, "reset",
+						phy->reset_gpio, 1);
+		}
+
+		/* Do we need VCC regulator ? */
+		if (gpio_is_valid(phy->vcc_gpio)) {
+
+			rail_name = kmalloc(13, GFP_KERNEL);
+			if (!rail_name)
+				return -ENOMEM;
+
+			scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
+
+			usbhs_add_regulator(rail_name, phy_id, "vcc",
+					phy->vcc_gpio, phy->vcc_polarity);
+		}
+
+		phy++;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index c5a3c6f9504e..e832bc7b8e2d 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/err.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -26,6 +27,24 @@
 static u8		async_cs, sync_cs;
 static unsigned		refclk_psec;
 
+static struct gpmc_settings tusb_async = {
+	.wait_on_read	= true,
+	.wait_on_write	= true,
+	.device_width	= GPMC_DEVWIDTH_16BIT,
+	.mux_add_data	= GPMC_MUX_AD,
+};
+
+static struct gpmc_settings tusb_sync = {
+	.burst_read	= true,
+	.burst_write	= true,
+	.sync_read	= true,
+	.sync_write	= true,
+	.wait_on_read	= true,
+	.wait_on_write	= true,
+	.burst_len	= GPMC_BURST_16,
+	.device_width	= GPMC_DEVWIDTH_16BIT,
+	.mux_add_data	= GPMC_MUX_AD,
+};
 
 /* NOTE:  timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
 
@@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
 
 	memset(&dev_t, 0, sizeof(dev_t));
 
-	dev_t.mux = true;
-
 	dev_t.t_ceasu = 8 * 1000;
 	dev_t.t_avdasu = t_acsnh_advnh - 7000;
 	dev_t.t_ce_avd = 1000;
@@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
 	dev_t.t_wpl = 300;
 	dev_t.cyc_aavdh_we = 1;
 
-	gpmc_calc_timings(&t, &dev_t);
+	gpmc_calc_timings(&t, &tusb_async, &dev_t);
 
 	return gpmc_cs_set_timings(async_cs, &t);
 }
@@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 
 	memset(&dev_t, 0, sizeof(dev_t));
 
-	dev_t.mux = true;
-	dev_t.sync_read = true;
-	dev_t.sync_write = true;
-
 	dev_t.clk = 11100;
 	dev_t.t_bacc = 1000;
 	dev_t.t_ces = 1000;
@@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 	dev_t.cyc_wpl = 6;
 	dev_t.t_ce_rdyz = 7000;
 
-	gpmc_calc_timings(&t, &dev_t);
+	gpmc_calc_timings(&t, &tusb_sync, &dev_t);
 
 	return gpmc_cs_set_timings(sync_cs, &t);
 }
@@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		return status;
 	}
 	tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+	tusb_async.wait_pin = waitpin;
 	async_cs = async;
-	gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_PAGE_LEN(2)
-			| GPMC_CONFIG1_WAIT_READ_MON
-			| GPMC_CONFIG1_WAIT_WRITE_MON
-			| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
-			| GPMC_CONFIG1_READTYPE_ASYNC
-			| GPMC_CONFIG1_WRITETYPE_ASYNC
-			| GPMC_CONFIG1_DEVICESIZE_16
-			| GPMC_CONFIG1_DEVICETYPE_NOR
-			| GPMC_CONFIG1_MUXADDDATA);
 
+	status = gpmc_cs_program_settings(async_cs, &tusb_async);
+	if (status < 0)
+		return status;
 
 	/* SYNC region, primarily for DMA */
 	status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
@@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		return status;
 	}
 	tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+	tusb_sync.wait_pin = waitpin;
 	sync_cs = sync;
-	gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_READMULTIPLE_SUPP
-			| GPMC_CONFIG1_READTYPE_SYNC
-			| GPMC_CONFIG1_WRITEMULTIPLE_SUPP
-			| GPMC_CONFIG1_WRITETYPE_SYNC
-			| GPMC_CONFIG1_PAGE_LEN(2)
-			| GPMC_CONFIG1_WAIT_READ_MON
-			| GPMC_CONFIG1_WAIT_WRITE_MON
-			| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
-			| GPMC_CONFIG1_DEVICESIZE_16
-			| GPMC_CONFIG1_DEVICETYPE_NOR
-			| GPMC_CONFIG1_MUXADDDATA
-			/* fclk divider gets set later */
-			);
+
+	status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
+	if (status < 0)
+		return status;
 
 	/* IRQ */
 	status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index 3319f5cf47a3..e7261ebcf7b0 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -53,8 +53,17 @@
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 #define USBPHY_DATA_POLARITY	(1 << 23)
 
+struct usbhs_phy_data {
+	int port;		/* 1 indexed port number */
+	int reset_gpio;
+	int vcc_gpio;
+	bool vcc_polarity;	/* 1 active high, 0 active low */
+	void *platform_data;
+};
+
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
 
 extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);