OMAP2+: hwmod: use status bit info for reset line

On OMAP2 and OMAP3 the reset ctrl shift doesn't match the
status bit, as it does on OMAP4, when handling the reset lines.

This patch adds a new member in the reset info structure, so now it
can be added as part of hwmod data, and checked accordingly for
OMAP2 or 3; otherwise, there could be cases when the shift masks
doesn't match both of the registers, and a successful reset might
throw an error message or vice versa.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
[paul@pwsan.com: added a warning if st_shift used on OMAP4; renamed 'r'
 variable; improved some documentation]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 10 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index ec0362574b5e..051213fbc346 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -118,7 +118,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 /**
  * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @shift: register bit shift corresponding to the reset line to deassert
+ * @rst_shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: register bit shift for the status of the deasserted submodule
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -129,27 +130,28 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 {
-	u32 mask;
+	u32 rst, st;
 	int c;
 
 	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 		return -EINVAL;
 
-	mask = 1 << shift;
+	rst = 1 << rst_shift;
+	st = 1 << st_shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
-	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	omap2_prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
 	/* de-assert the reset control line */
-	omap2_prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
 	/* wait the status to be set */
 	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
-						  mask),
+						  st),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;