Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...

1 files changed, 34 insertions, 6 deletions

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da054801b114..a3c013345c45 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,11 +16,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
 #define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
-#include "ctrl_module_core_44xx.h"
-#include "ctrl_module_wkup_44xx.h"
-#include "ctrl_module_pad_core_44xx.h"
-#include "ctrl_module_pad_wkup_44xx.h"
-
 #include "am33xx.h"
 
 #ifndef __ASSEMBLY__
@@ -254,6 +249,39 @@
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
+/* OMAP4 CONTROL MODULE */
+#define OMAP4_CTRL_MODULE_PAD_WKUP			0x4a31e000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2	0x0604
+#define OMAP4_CTRL_MODULE_CORE_STATUS			0x02c4
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1	0x0218
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR		0x0304
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY	0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX	0x0608
+
+/* OMAP4 CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT			29
+#define OMAP4_DSI2_LANEENABLE_MASK			(0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT			24
+#define OMAP4_DSI1_LANEENABLE_MASK			(0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT				19
+#define OMAP4_DSI1_PIPD_MASK				(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT				14
+#define OMAP4_DSI2_PIPD_MASK				(0x1f << 14)
+
+/* OMAP4 CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT		24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK		(0x1f << 24)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT		29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK		(0x3 << 29)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT		21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK		(1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT		19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK		(0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT		18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK		(1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT		16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK		(0x3 << 16)
+
 /* OMAP54XX CONTROL STATUS register */
 #define OMAP5XXX_CONTROL_STATUS                0x134
 #define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
@@ -427,7 +455,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else