Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

1 files changed, 26 insertions, 26 deletions

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e642acf9cad0..c33adea0247c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,14 +17,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
 
+#include "soc.h"
 #include "common.h"
 #include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
@@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+	{
+		.sync_clk = 0,
 
-	.sync_clk = 0,
+		.cs_on = 0,
+		.cs_rd_off = 36,
+		.cs_wr_off = 36,
 
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
+		.adv_on = 6,
+		.adv_rd_off = 24,
+		.adv_wr_off = 36,
 
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
+		.we_off = 30,
+		.oe_off = 48,
 
-	.we_off = 30,
-	.oe_off = 48,
+		.access = 54,
+		.rd_cycle = 72,
+		.wr_cycle = 72,
 
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
+		.wr_access = 30,
+		.wr_data_mux_bus = 0,
+	},
 };
 
-static struct omap_nand_platform_data board_nand_data = {
-	.gpmc_t		= &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
-			u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+				int nand_type, struct gpmc_timings *gpmc_t)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
@@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	gpmc_nand_init(&board_nand_data);
+	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
 
@@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
 		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs, nand_type);
+			partition_info[2].nr_parts, nandcs,
+			nand_type, nand_default_timings);
 }