Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

9 files changed, 22 insertions, 22 deletions

diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 927d5a181760..c1c5fb6a5b4c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -79,7 +79,7 @@
 
 
 /*
- * Register useage
+ * Register usage
  * r8  - temporary
  * r9  - the driver buffer
  * r10 - temporary
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 7c5e2112c776..e68dfde1918e 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -276,7 +276,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
+	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -482,7 +482,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
+	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -500,7 +500,7 @@ static void __init osk_mistral_init(void)
 		int irq = gpio_to_irq(OMAP_MPUIO(2));
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index d7bbbe721a75..45f01d2c3a7a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -256,12 +256,12 @@ palmz71_powercable(int irq, void *dev_id)
 {
 	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
-		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				IRQ_TYPE_EDGE_FALLING);
+		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
+				 IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
-		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				IRQ_TYPE_EDGE_RISING);
+		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
+				 IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d41fe2d0616a..0ad781db4e66 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -399,7 +399,7 @@ static void __init omap_sx1_init(void)
 	sx1_mmc_init();
 
 	/* turn on USB power */
-	/* sx1_setusbpower(1); cant do it here because i2c is not ready */
+	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
 	gpio_request(1, "A_IRDA_OFF");
 	gpio_request(11, "A_SWITCH");
 	gpio_request(15, "A_USB_ON");
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index bdc0ac8dc21f..65d24204937a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -279,10 +279,10 @@ static void __init voiceblue_init(void)
 	gpio_request(13, "16C554 irq");
 	gpio_request(14, "16C554 irq");
 	gpio_request(15, "16C554 irq");
-	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b0f4c231595f..36f26c3fa25e 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {}
  * Claiming GPIOs, and setting their direction and initial values, is the
  * responsibility of the device drivers.  So is responding to probe().
  *
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
  * kept out of drivers as much as possible.  In particular, pin setup
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0ace7998aaa5..cddbf8b089ce 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -156,17 +156,17 @@ void omap1510_fpga_init_irq(void)
 			 * The touchscreen interrupt is level-sensitive, so
 			 * we'll use the regular mask_ack routine for it.
 			 */
-			set_irq_chip(i, &omap_fpga_irq_ack);
+			irq_set_chip(i, &omap_fpga_irq_ack);
 		}
 		else {
 			/*
 			 * All FPGA interrupts except the touchscreen are
 			 * edge-sensitive, so we won't mask them.
 			 */
-			set_irq_chip(i, &omap_fpga_irq);
+			irq_set_chip(i, &omap_fpga_irq);
 		}
 
-		set_irq_handler(i, handle_edge_irq);
+		irq_set_handler(i, handle_edge_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
 
@@ -183,6 +183,6 @@ void omap1510_fpga_init_irq(void)
 		return;
 	}
 	gpio_direction_input(13);
-	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
+	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 7a2df29400ca..23eed0035ed8 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -31,7 +31,7 @@
 #endif
 
 /*
- * These are the offsets from the begining of the fiq_buffer. They are put here
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
  * since the buffer and header need to be accessed by drivers servicing devices
  * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
  */
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 731dd33bff51..5d3da7a63af3 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -230,8 +230,8 @@ void __init omap_init_irq(void)
 			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
 			omap_irq_set_cfg(j, 0, 0, irq_trigger);
 
-			set_irq_chip(j, &omap_irq_chip);
-			set_irq_handler(j, handle_level_irq);
+			irq_set_chip_and_handler(j, &omap_irq_chip,
+						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
 	}