Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...

1 files changed, 21 insertions, 18 deletions

diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 5dd1d4a6aeb9..617c60a170a4 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
 
@@ -24,7 +25,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/mfp.h>
-#include <mach/gpio-pxa.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
 
@@ -33,8 +33,6 @@
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
-#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
-
 static struct mfp_addr_map mmp2_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
@@ -95,24 +93,9 @@ void mmp2_clear_pmic_int(void)
 	__raw_writel(data, mfpr_pmic);
 }
 
-static void __init mmp2_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-
-	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
-	for (i = 0; i < 6; i++)
-		__raw_writel(0xffffffff, APMASK(i));
-
-	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
-}
-
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
-	mmp2_init_gpio();
 }
 
 static void sdhc_clk_enable(struct clk *clk)
@@ -149,6 +132,7 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
@@ -168,6 +152,7 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
 	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
@@ -230,3 +215,21 @@ MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
 /* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
 MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
 
+struct resource mmp2_resource_gpio[] = {
+	{
+		.start	= 0xd4019000,
+		.end	= 0xd4019fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_MMP2_GPIO,
+		.end	= IRQ_MMP2_GPIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mmp2_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
+	.resource	= mmp2_resource_gpio,
+};