Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

1 files changed, 65 insertions, 0 deletions

diff --git a/arch/arm/mach-ks8695/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h
new file mode 100644
index 000000000000..82c5f3791afb
--- /dev/null
+++ b/arch/arm/mach-ks8695/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
+#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_LMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
+#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
+#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
+#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
+#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
+#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
+#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
+#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif