Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "The main change this time around is a cleanup of some of the oldest
  platforms based on the XScale and ARM9 CPU cores, which are between 10
  and 20 years old.

  The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
  IOP33x/IOP13xx platforms are removed after we determined that nobody
  is using them any more.

  The TI Davinci and NXP LPC32xx platforms on the other hand are still
  in active use and are converted to the ARCH_MULTIPLATFORM build,
  meaning that we can compile a kernel that works on these along with
  most other ARMv5 platforms. Changes toward that goal are also merged
  for IOP32x, but additional work is needed to complete this. Patches
  for the remaining ARMv5 platforms have started but need more work and
  some testing.

  Support for the new ASpeed AST2600 gets added, this is based on the
  Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
  ARMv6 chips in the same family.

  Other changes include a cleanup of the ST-Ericsson ux500 platform and
  the move of the TI Davinci platform to a new clocksource driver"

[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
  buildable on other platforms through COMPILE_TEST, but that causes new
  warnings that I most definitely do not want to see during the merge
  window as that could hide other issues.

  So the COMPILE_TEST option got disabled for them again   - Linus ]

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
  ARM: davinci: support multiplatform build for ARM v5
  arm64: exynos: Enable exynos-chipid driver
  ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  ARM: davinci: dm646x: Fix a typo in the comment
  ARM: davinci: dm646x: switch to using the clocksource driver
  ARM: davinci: dm644x: switch to using the clocksource driver
  ARM: aspeed: Enable SMP boot
  ARM: aspeed: Add ASPEED AST2600 architecture
  ARM: aspeed: Select timer in each SoC
  dt-bindings: arm: cpus: Add ASPEED SMP
  ARM: imx: stop adjusting ar8031 phy tx delay
  mailmap: map old company name to new one @microchip.com
  MAINTAINERS: at91: remove the TC entry
  MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
  ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: debug-ll: Add support for r7s9210
  ...

1 files changed, 0 insertions, 164 deletions

diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
deleted file mode 100644
index 4b7ec8d9300c..000000000000
--- a/arch/arm/mach-ks8695/irq.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ks8695/irq.c
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-static void ks8695_irq_mask(struct irq_data *d)
-{
-	unsigned long inten;
-
-	inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
-	inten &= ~(1 << d->irq);
-
-	__raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
-}
-
-static void ks8695_irq_unmask(struct irq_data *d)
-{
-	unsigned long inten;
-
-	inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
-	inten |= (1 << d->irq);
-
-	__raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
-}
-
-static void ks8695_irq_ack(struct irq_data *d)
-{
-	__raw_writel((1 << d->irq), KS8695_IRQ_VA + KS8695_INTST);
-}
-
-
-static struct irq_chip ks8695_irq_level_chip;
-static struct irq_chip ks8695_irq_edge_chip;
-
-
-static int ks8695_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	unsigned long ctrl, mode;
-	unsigned short level_triggered = 0;
-
-	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
-
-	switch (type) {
-		case IRQ_TYPE_LEVEL_HIGH:
-			mode = IOPC_TM_HIGH;
-			level_triggered = 1;
-			break;
-		case IRQ_TYPE_LEVEL_LOW:
-			mode = IOPC_TM_LOW;
-			level_triggered = 1;
-			break;
-		case IRQ_TYPE_EDGE_RISING:
-			mode = IOPC_TM_RISING;
-			break;
-		case IRQ_TYPE_EDGE_FALLING:
-			mode = IOPC_TM_FALLING;
-			break;
-		case IRQ_TYPE_EDGE_BOTH:
-			mode = IOPC_TM_EDGE;
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (d->irq) {
-		case KS8695_IRQ_EXTERN0:
-			ctrl &= ~IOPC_IOEINT0TM;
-			ctrl |= IOPC_IOEINT0_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN1:
-			ctrl &= ~IOPC_IOEINT1TM;
-			ctrl |= IOPC_IOEINT1_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN2:
-			ctrl &= ~IOPC_IOEINT2TM;
-			ctrl |= IOPC_IOEINT2_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN3:
-			ctrl &= ~IOPC_IOEINT3TM;
-			ctrl |= IOPC_IOEINT3_MODE(mode);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (level_triggered) {
-		irq_set_chip_and_handler(d->irq, &ks8695_irq_level_chip,
-					 handle_level_irq);
-	}
-	else {
-		irq_set_chip_and_handler(d->irq, &ks8695_irq_edge_chip,
-					 handle_edge_irq);
-	}
-
-	__raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC);
-	return 0;
-}
-
-static struct irq_chip ks8695_irq_level_chip = {
-	.irq_ack	= ks8695_irq_mask,
-	.irq_mask	= ks8695_irq_mask,
-	.irq_unmask	= ks8695_irq_unmask,
-	.irq_set_type	= ks8695_irq_set_type,
-};
-
-static struct irq_chip ks8695_irq_edge_chip = {
-	.irq_ack	= ks8695_irq_ack,
-	.irq_mask	= ks8695_irq_mask,
-	.irq_unmask	= ks8695_irq_unmask,
-	.irq_set_type	= ks8695_irq_set_type,
-};
-
-void __init ks8695_init_irq(void)
-{
-	unsigned int irq;
-
-	/* Disable all interrupts initially */
-	__raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC);
-	__raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		switch (irq) {
-			/* Level-triggered interrupts */
-			case KS8695_IRQ_BUS_ERROR:
-			case KS8695_IRQ_UART_MODEM_STATUS:
-			case KS8695_IRQ_UART_LINE_STATUS:
-			case KS8695_IRQ_UART_RX:
-			case KS8695_IRQ_COMM_TX:
-			case KS8695_IRQ_COMM_RX:
-				irq_set_chip_and_handler(irq,
-							 &ks8695_irq_level_chip,
-							 handle_level_irq);
-				break;
-
-			/* Edge-triggered interrupts */
-			default:
-				/* clear pending bit */
-				ks8695_irq_ack(irq_get_irq_data(irq));
-				irq_set_chip_and_handler(irq,
-							 &ks8695_irq_edge_chip,
-							 handle_edge_irq);
-		}
-
-		irq_clear_status_flags(irq, IRQ_NOREQUEST);
-	}
-}