Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "The main change this time around is a cleanup of some of the oldest
  platforms based on the XScale and ARM9 CPU cores, which are between 10
  and 20 years old.

  The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
  IOP33x/IOP13xx platforms are removed after we determined that nobody
  is using them any more.

  The TI Davinci and NXP LPC32xx platforms on the other hand are still
  in active use and are converted to the ARCH_MULTIPLATFORM build,
  meaning that we can compile a kernel that works on these along with
  most other ARMv5 platforms. Changes toward that goal are also merged
  for IOP32x, but additional work is needed to complete this. Patches
  for the remaining ARMv5 platforms have started but need more work and
  some testing.

  Support for the new ASpeed AST2600 gets added, this is based on the
  Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
  ARMv6 chips in the same family.

  Other changes include a cleanup of the ST-Ericsson ux500 platform and
  the move of the TI Davinci platform to a new clocksource driver"

[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
  buildable on other platforms through COMPILE_TEST, but that causes new
  warnings that I most definitely do not want to see during the merge
  window as that could hide other issues.

  So the COMPILE_TEST option got disabled for them again   - Linus ]

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
  ARM: davinci: support multiplatform build for ARM v5
  arm64: exynos: Enable exynos-chipid driver
  ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  ARM: davinci: dm646x: Fix a typo in the comment
  ARM: davinci: dm646x: switch to using the clocksource driver
  ARM: davinci: dm644x: switch to using the clocksource driver
  ARM: aspeed: Enable SMP boot
  ARM: aspeed: Add ASPEED AST2600 architecture
  ARM: aspeed: Select timer in each SoC
  dt-bindings: arm: cpus: Add ASPEED SMP
  ARM: imx: stop adjusting ar8031 phy tx delay
  mailmap: map old company name to new one @microchip.com
  MAINTAINERS: at91: remove the TC entry
  MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
  ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: debug-ll: Add support for r7s9210
  ...

1 files changed, 0 insertions, 238 deletions

diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
deleted file mode 100644
index f319258d1226..000000000000
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ks8695/board-acs5k.c
- *
- * Brivo Systems LLC, ACS-5000 Master Board
- *
- * Copyright 2008 Simtec Electronics
- *		  Daniel Silverstone <dsilvers@simtec.co.uk>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/platform_data/pca953x.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "devices.h"
-#include <mach/gpio-ks8695.h>
-
-#include "generic.h"
-
-static struct gpiod_lookup_table acs5k_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
-	.table		= {
-		GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
-	.udelay		= 10,
-};
-
-static struct platform_device acs5k_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= -1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev		= {
-		.platform_data	= &acs5k_i2c_device_platdata,
-	},
-};
-
-static int acs5k_pca9555_setup(struct i2c_client *client,
-			       unsigned gpio_base, unsigned ngpio,
-			       void *context)
-{
-	static int acs5k_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
-		if (acs5k_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-					      acs5k_gpio_value[n]);
-		gpio_export(gpio_base + n, 0); /* Export, direction locked down */
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
-	.gpio_base	= 16, /* Start directly after the CPU's GPIO */
-	.invert		= 0, /* Do not invert */
-	.setup		= acs5k_pca9555_setup,
-};
-
-static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-	{
-		I2C_BOARD_INFO("pca9555", 0x20),
-		.platform_data = &acs5k_i2c_pca9555_platdata,
-	},
-};
-
-static void __init acs5k_i2c_init(void)
-{
-	/* The gpio interface */
-	gpiod_add_lookup_table(&acs5k_i2c_gpiod_table);
-	platform_device_register(&acs5k_i2c_device);
-	/* I2C devices */
-	i2c_register_board_info(0, acs5k_i2c_devs,
-				ARRAY_SIZE(acs5k_i2c_devs));
-}
-
-static struct mtd_partition acs5k_nor_partitions[] = {
-	[0] = {
-		.name	= "Boot Agent and config",
-		.size	= SZ_256K,
-		.offset	= 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_1M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "SquashFS1",
-		.size	= SZ_2M,
-		.offset	= SZ_256K + SZ_1M,
-	},
-	[3] = {
-		.name	= "SquashFS2",
-		.size	= SZ_4M + SZ_2M,
-		.offset	= SZ_256K + SZ_1M + SZ_2M,
-	},
-	[4] = {
-		.name	= "Data",
-		.size	= SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
-		.offset	= SZ_256K + SZ_8M + SZ_1M,
-	}
-};
-
-static struct physmap_flash_data acs5k_nor_pdata = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(acs5k_nor_partitions),
-	.parts		= acs5k_nor_partitions,
-};
-
-static struct resource acs5k_nor_resource[] = {
-	[0] = {
-		.start = SZ_32M, /* We expect the bootloader to map
-				  * the flash here.
-				  */
-		.end   = SZ_32M + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = SZ_32M + SZ_16M,
-		.end   = SZ_32M + SZ_32M - SZ_256K - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device acs5k_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(acs5k_nor_resource),
-	.resource	= acs5k_nor_resource,
-	.dev		= {
-		.platform_data = &acs5k_nor_pdata,
-	},
-};
-
-static void __init acs5k_register_nor(void)
-{
-	int ret;
-
-	if (acs5k_nor_partitions[0].mask_flags == 0)
-		printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
-
-	ret = platform_device_register(&acs5k_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-}
-
-static int __init acs5k_protection_setup(char *s)
-{
-	/* We can't allocate anything here but we should be able
-	 * to trivially parse s and decide if we can protect the
-	 * bootloader partition or not
-	 */
-	if (strcmp(s, "no") == 0)
-		acs5k_nor_partitions[0].mask_flags = 0;
-
-	return 1;
-}
-
-__setup("protect_bootloader=", acs5k_protection_setup);
-
-static void __init acs5k_init_gpio(void)
-{
-	int i;
-
-	ks8695_register_gpios();
-	for (i = 0; i < 4; ++i)
-		gpio_request(i, "ACS5K IRQ");
-	gpio_request(7, "ACS5K KS_FRDY");
-	for (i = 8; i < 16; ++i)
-		gpio_request(i, "ACS5K Unused");
-
-	gpio_request(3, "ACS5K CAN Control");
-	gpio_request(6, "ACS5K Heartbeat");
-	gpio_direction_output(3, 1); /* Default CAN_RESET high */
-	gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
-	gpio_export(3, 0); /* export CAN_RESET as output only */
-	gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
-}
-
-static void __init acs5k_init(void)
-{
-	acs5k_init_gpio();
-
-	/* Network device */
-	ks8695_add_device_lan();	/* eth0 = LAN */
-	ks8695_add_device_wan();	/* ethX = WAN */
-
-	/* NOR devices */
-	acs5k_register_nor();
-
-	/* I2C bus */
-	acs5k_i2c_init();
-}
-
-MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
-	/* Maintainer: Simtec Electronics. */
-	.atag_offset	= 0x100,
-	.map_io		= ks8695_map_io,
-	.init_irq	= ks8695_init_irq,
-	.init_machine	= acs5k_init,
-	.init_time	= ks8695_timer_init,
-	.restart	= ks8695_restart,
-MACHINE_END