ARM: integrator: Delete the V3 PCI driver

Before adding a proper PCI driver in drivers/pci/host, clean out
the cruft by deleting the old driver from the machine.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 0 insertions, 913 deletions

diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 1ebe45356b09..99b63946b61e 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -7,6 +7,4 @@
 obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
-
-obj-$(CONFIG_PCI)			+= pci_v3.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index a1af634f8709..8efe484fac13 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -36,7 +36,6 @@
 #include "hardware.h"
 #include "cm.h"
 #include "common.h"
-#include "pci_v3.h"
 #include "lm.h"
 
 /* Regmap to the AP system controller */
@@ -74,7 +73,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
-	pci_v3_early_init();
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
deleted file mode 100644
index 2565f0e7b5cf..000000000000
--- a/arch/arm/mach-integrator/pci_v3.c
+++ /dev/null
@@ -1,900 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/pci_v3.c
- *
- *  PCI functions for V3 host PCI bridge
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-#include <video/vga.h>
-
-#include <asm/mach/map.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include <asm/irq_regs.h>
-
-#include "pci_v3.h"
-#include "hardware.h"
-
-/*
- * Where in the memory map does PCI live?
- *
- * This represents a fairly liberal usage of address space.  Even though
- * the V3 only has two windows (therefore we need to map stuff on the fly),
- * we maintain the same addresses, even if they're not mapped.
- */
-#define PHYS_PCI_MEM_BASE               0x40000000 /* 256M */
-#define PHYS_PCI_PRE_BASE               0x50000000 /* 256M */
-#define PHYS_PCI_IO_BASE                0x60000000 /* 16M */
-#define PHYS_PCI_CONFIG_BASE            0x61000000 /* 16M */
-#define PHYS_PCI_V3_BASE                0x62000000 /* 64K */
-
-#define PCI_MEMORY_VADDR               IOMEM(0xe8000000)
-#define PCI_CONFIG_VADDR               IOMEM(0xec000000)
-
-/*
- * V3 Local Bus to PCI Bridge definitions
- *
- * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- * All V3 register names are prefaced by V3_ to avoid clashing with any other
- * PCI definitions.  Their names match the user's manual.
- *
- * I'm assuming that I20 is disabled.
- *
- */
-#define V3_PCI_VENDOR                   0x00000000
-#define V3_PCI_DEVICE                   0x00000002
-#define V3_PCI_CMD                      0x00000004
-#define V3_PCI_STAT                     0x00000006
-#define V3_PCI_CC_REV                   0x00000008
-#define V3_PCI_HDR_CFG                  0x0000000C
-#define V3_PCI_IO_BASE                  0x00000010
-#define V3_PCI_BASE0                    0x00000014
-#define V3_PCI_BASE1                    0x00000018
-#define V3_PCI_SUB_VENDOR               0x0000002C
-#define V3_PCI_SUB_ID                   0x0000002E
-#define V3_PCI_ROM                      0x00000030
-#define V3_PCI_BPARAM                   0x0000003C
-#define V3_PCI_MAP0                     0x00000040
-#define V3_PCI_MAP1                     0x00000044
-#define V3_PCI_INT_STAT                 0x00000048
-#define V3_PCI_INT_CFG                  0x0000004C
-#define V3_LB_BASE0                     0x00000054
-#define V3_LB_BASE1                     0x00000058
-#define V3_LB_MAP0                      0x0000005E
-#define V3_LB_MAP1                      0x00000062
-#define V3_LB_BASE2                     0x00000064
-#define V3_LB_MAP2                      0x00000066
-#define V3_LB_SIZE                      0x00000068
-#define V3_LB_IO_BASE                   0x0000006E
-#define V3_FIFO_CFG                     0x00000070
-#define V3_FIFO_PRIORITY                0x00000072
-#define V3_FIFO_STAT                    0x00000074
-#define V3_LB_ISTAT                     0x00000076
-#define V3_LB_IMASK                     0x00000077
-#define V3_SYSTEM                       0x00000078
-#define V3_LB_CFG                       0x0000007A
-#define V3_PCI_CFG                      0x0000007C
-#define V3_DMA_PCI_ADR0                 0x00000080
-#define V3_DMA_PCI_ADR1                 0x00000090
-#define V3_DMA_LOCAL_ADR0               0x00000084
-#define V3_DMA_LOCAL_ADR1               0x00000094
-#define V3_DMA_LENGTH0                  0x00000088
-#define V3_DMA_LENGTH1                  0x00000098
-#define V3_DMA_CSR0                     0x0000008B
-#define V3_DMA_CSR1                     0x0000009B
-#define V3_DMA_CTLB_ADR0                0x0000008C
-#define V3_DMA_CTLB_ADR1                0x0000009C
-#define V3_DMA_DELAY                    0x000000E0
-#define V3_MAIL_DATA                    0x000000C0
-#define V3_PCI_MAIL_IEWR                0x000000D0
-#define V3_PCI_MAIL_IERD                0x000000D2
-#define V3_LB_MAIL_IEWR                 0x000000D4
-#define V3_LB_MAIL_IERD                 0x000000D6
-#define V3_MAIL_WR_STAT                 0x000000D8
-#define V3_MAIL_RD_STAT                 0x000000DA
-#define V3_QBA_MAP                      0x000000DC
-
-/*  PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
-
-/*  SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
-
-/*  PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
-#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
-#define V3_PCI_CFG_M_EN3V		(1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
-
-/*  PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
-#define V3_PCI_BASE_M_TYPE              (3 << 1)
-#define V3_PCI_BASE_M_IO                (1 << 0)
-
-/*  PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
-#define V3_PCI_MAP_M_SWAP               (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
-
-/*
- *  LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE		0xfff00000
-#define V3_LB_BASE_SWAP			(3 << 8)
-#define V3_LB_BASE_ADR_SIZE		(15 << 4)
-#define V3_LB_BASE_PREFETCH		(1 << 3)
-#define V3_LB_BASE_ENABLE		(1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
-
-#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- *  LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR		0xfff0
-#define V3_LB_MAP_TYPE			(7 << 1)
-#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK		(0 << 1)
-#define V3_LB_MAP_TYPE_IO		(1 << 1)
-#define V3_LB_MAP_TYPE_MEM		(3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
-
-#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- *  LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE		0xff00
-#define V3_LB_BASE2_SWAP		(3 << 6)
-#define V3_LB_BASE2_ENABLE		(1 << 0)
-
-#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- *  LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR		0xff00
-
-#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-/*
- * The V3 PCI interface chip in Integrator provides several windows from
- * local bus memory into the PCI memory areas.   Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse
- * one of the windows for access to PCI configuration space.  The
- * memory map is as follows:
- *
- * Local Bus Memory         Usage
- *
- * 40000000 - 4FFFFFFF      PCI memory.  256M non-prefetchable
- * 50000000 - 5FFFFFFF      PCI memory.  256M prefetchable
- * 60000000 - 60FFFFFF      PCI IO.  16M
- * 61000000 - 61FFFFFF      PCI Configuration. 16M
- *
- * There are three V3 windows, each described by a pair of V3 registers.
- * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
- * Base0 and Base1 can be used for any type of PCI memory access.   Base2
- * can be used either for PCI I/O or for I20 accesses.  By default, uHAL
- * uses this only for PCI IO space.
- *
- * Normally these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
- * Mem   50000000 - 5FFFFFFF      LB_BASE1/LB_MAP1
- * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
- * Cfg   61000000 - 61FFFFFF
- *
- * This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI
- * configuration space primitives) we must remap the spaces as follows:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0
- * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
- * Cfg   61000000 - 61FFFFFF      LB_BASE1/LB_MAP1
- *
- * To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within
- * each of the BASE/MAP pairs in turn (in ascending register number
- * order).  It will use the first matching pair.   So, for example,
- * if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from
- * LB_BASE0/LB_MAP0.
- *
- * To allow PCI Configuration space access, the code enlarges the
- * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M.  This occludes
- * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
- * be remapped for use by configuration cycles.
- *
- * At the end of the PCI Configuration space accesses,
- * LB_BASE1/LB_MAP1 is reset to map PCI Memory.  Finally the window
- * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
- * reveal the now restored LB_BASE1/LB_MAP1 window.
- *
- * NOTE: We do not set up I2O mapping.  I suspect that this is only
- * for an intelligent (target) device.  Using I2O disables most of
- * the mappings into PCI memory.
- */
-
-/* Filled in by probe */
-static void __iomem *pci_v3_base;
-/* CPU side memory ranges */
-static struct resource conf_mem; /* FIXME: remap this instead of static map */
-static struct resource io_mem;
-static struct resource non_mem;
-static struct resource pre_mem;
-/* PCI side memory ranges */
-static u64 non_mem_pci;
-static u64 non_mem_pci_sz;
-static u64 pre_mem_pci;
-static u64 pre_mem_pci_sz;
-
-// V3 access routines
-#define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o))
-#define v3_readb(o)    (__raw_readb(pci_v3_base + (unsigned int)(o)))
-
-#define v3_writew(o,v) __raw_writew(v, pci_v3_base + (unsigned int)(o))
-#define v3_readw(o)    (__raw_readw(pci_v3_base + (unsigned int)(o)))
-
-#define v3_writel(o,v) __raw_writel(v, pci_v3_base + (unsigned int)(o))
-#define v3_readl(o)    (__raw_readl(pci_v3_base + (unsigned int)(o)))
-
-/*============================================================================
- *
- * routine:	uHALir_PCIMakeConfigAddress()
- *
- * parameters:	bus = which bus
- *              device = which device
- *              function = which function
- *		offset = configuration space register we are interested in
- *
- * description:	this routine will generate a platform dependent config
- *		address.
- *
- * calls:	none
- *
- * returns:	configuration address to play on the PCI bus
- *
- * To generate the appropriate PCI configuration cycles in the PCI
- * configuration address space, you present the V3 with the following pattern
- * (which is very nearly a type 1 (except that the lower two bits are 00 and
- * not 01).   In order for this mapping to work you need to set up one of
- * the local to PCI aperatures to 16Mbytes in length translating to
- * PCI configuration space starting at 0x0000.0000.
- *
- * PCI configuration cycles look like this:
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *
- */
-
-#undef V3_LB_BASE_PREFETCH
-#define V3_LB_BASE_PREFETCH 0
-
-static void __iomem *v3_open_config_window(struct pci_bus *bus,
-					   unsigned int devfn, int offset)
-{
-	unsigned int address, mapaddress, busnr;
-
-	busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	BUG_ON(offset > 255);
-	BUG_ON(busnr > 255);
-	BUG_ON(devfn > 255);
-
-	if (busnr == 0) {
-		int slot = PCI_SLOT(devfn);
-
-		/*
-		 * local bus segment so need a type 0 config cycle
-		 *
-		 * build the PCI configuration "address" with one-hot in
-		 * A31-A11
-		 *
-		 * mapaddress:
-		 *  3:1 = config cycle (101)
-		 *  0   = PCI A1 & A0 are 0 (0)
-		 */
-		address = PCI_FUNC(devfn) << 8;
-		mapaddress = V3_LB_MAP_TYPE_CONFIG;
-
-		if (slot > 12)
-			/*
-			 * high order bits are handled by the MAP register
-			 */
-			mapaddress |= 1 << (slot - 5);
-		else
-			/*
-			 * low order bits handled directly in the address
-			 */
-			address |= 1 << (slot + 11);
-	} else {
-        	/*
-		 * not the local bus segment so need a type 1 config cycle
-		 *
-		 * address:
-		 *  23:16 = bus number
-		 *  15:11 = slot number (7:3 of devfn)
-		 *  10:8  = func number (2:0 of devfn)
-		 *
-		 * mapaddress:
-		 *  3:1 = config cycle (101)
-		 *  0   = PCI A1 & A0 from host bus (1)
-		 */
-		mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
-		address = (busnr << 16) | (devfn << 8);
-	}
-
-	/*
-	 * Set up base0 to see all 512Mbytes of memory space (not
-	 * prefetchable), this frees up base1 for re-use by
-	 * configuration memory
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
-			V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
-
-	/*
-	 * Set up base1/map1 to point into configuration space.
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
-			V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, mapaddress);
-
-	return PCI_CONFIG_VADDR + address + offset;
-}
-
-static void v3_close_config_window(void)
-{
-	/*
-	 * Reassign base1 for use by prefetchable PCI memory
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
-			V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
-	/*
-	 * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
-}
-
-static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-			  int size, u32 *val)
-{
-	int ret = pci_generic_config_read(bus, devfn, where, size, val);
-	v3_close_config_window();
-	return ret;
-}
-
-static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-			   int size, u32 val)
-{
-	int ret = pci_generic_config_write(bus, devfn, where, size, val);
-	v3_close_config_window();
-	return ret;
-}
-
-static struct pci_ops pci_v3_ops = {
-	.map_bus = v3_open_config_window,
-	.read	= v3_read_config,
-	.write	= v3_write_config,
-};
-
-static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
-{
-	if (request_resource(&iomem_resource, &non_mem)) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pre_mem)) {
-		release_resource(&non_mem);
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region\n");
-		return -EBUSY;
-	}
-
-	/*
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	return 1;
-}
-
-/*
- * These don't seem to be implemented on the Integrator I have, which
- * means I can't get additional information on the reason for the pm2fb
- * problems.  I suppose I'll just have to mind-meld with the machine. ;)
- */
-static void __iomem *ap_syscon_base;
-#define INTEGRATOR_SC_PCIENABLE_OFFSET	0x18
-#define INTEGRATOR_SC_LBFADDR_OFFSET	0x20
-#define INTEGRATOR_SC_LBFCODE_OFFSET	0x24
-
-static int
-v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-#if 0
-	char buf[128];
-
-	sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
-		addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
-		v3_readb(V3_LB_ISTAT));
-	printk(KERN_DEBUG "%s", buf);
-#endif
-
-	v3_writeb(V3_LB_ISTAT, 0);
-	__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 12) & 15;
-		unsigned long val;
-
-		if (instr & 0x00400000)
-			val = 255;
-		else
-			val = -1;
-
-		regs->uregs[reg] = val;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	if ((instr & 0x0e100090) == 0x00100090) {
-		int reg = (instr >> 12) & 15;
-
-		regs->uregs[reg] = -1;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	return 1;
-}
-
-static irqreturn_t v3_irq(int irq, void *devid)
-{
-#ifdef CONFIG_DEBUG_LL
-	struct pt_regs *regs = get_irq_regs();
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-	char buf[128];
-	extern void printascii(const char *);
-
-	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
-		"ISTAT=%02x\n", irq, pc, instr,
-		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
-		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
-		v3_readb(V3_LB_ISTAT));
-	printascii(buf);
-#endif
-
-	v3_writew(V3_PCI_STAT, 0xf000);
-	v3_writeb(V3_LB_ISTAT, 0);
-	__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-
-#ifdef CONFIG_DEBUG_LL
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 16) & 15;
-		sprintf(buf, "   reg%d = %08lx\n", reg, regs->uregs[reg]);
-		printascii(buf);
-	}
-#endif
-	return IRQ_HANDLED;
-}
-
-static int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	if (!ap_syscon_base)
-		return -EINVAL;
-
-	if (nr == 0) {
-		sys->mem_offset = non_mem.start;
-		ret = pci_v3_setup_resources(sys);
-	}
-
-	return ret;
-}
-
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP?  - pci bus address
- */
-static void __init pci_v3_preinit(void)
-{
-	unsigned int temp;
-	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
-
-	pcibios_min_mem = 0x00100000;
-
-	/*
-	 * Hook in our fault handler for PCI errors
-	 */
-	hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
-	hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
-	hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-	hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-
-	/*
-	 * Unlock V3 registers, but only if they were previously locked.
-	 */
-	if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
-		v3_writew(V3_SYSTEM, 0xa05f);
-
-	/*
-	 * Setup window 0 - PCI non-prefetchable memory
-	 *  Local: 0x40000000 Bus: 0x00000000 Size: 256MB
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(non_mem_pci) |
-			V3_LB_MAP_TYPE_MEM);
-
-	/*
-	 * Setup window 1 - PCI prefetchable memory
-	 *  Local: 0x50000000 Bus: 0x10000000 Size: 256MB
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
-			V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
-	/*
-	 * Setup window 2 - PCI IO
-	 */
-	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
-
-	/*
-	 * Disable PCI to host IO cycles
-	 */
-	temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
-	temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
-	v3_writew(V3_PCI_CFG, temp);
-
-	printk(KERN_DEBUG "FIFO_CFG: %04x  FIFO_PRIO: %04x\n",
-		v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
-
-	/*
-	 * Set the V3 FIFO such that writes have higher priority than
-	 * reads, and local bus write causes local bus read fifo flush.
-	 * Same for PCI.
-	 */
-	v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
-
-	/*
-	 * Re-lock the system register.
-	 */
-	temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
-	v3_writew(V3_SYSTEM, temp);
-
-	/*
-	 * Clear any error conditions, and enable write errors.
-	 */
-	v3_writeb(V3_LB_ISTAT, 0);
-	v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
-	v3_writeb(V3_LB_IMASK, 0x28);
-	__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-}
-
-static void __init pci_v3_postinit(void)
-{
-	unsigned int pci_cmd;
-	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
-
-	pci_cmd = PCI_COMMAND_MEMORY |
-		  PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-
-	v3_writew(V3_PCI_CMD, pci_cmd);
-
-	v3_writeb(V3_LB_ISTAT, ~0x40);
-	v3_writeb(V3_LB_IMASK, 0x68);
-
-#if 0
-	ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
-	if (ret)
-		printk(KERN_ERR "PCI: unable to grab local bus timeout "
-		       "interrupt: %d\n", ret);
-#endif
-
-	register_isa_ports(non_mem.start, io_address, 0);
-}
-
-/*
- * A small note about bridges and interrupts.  The DECchip 21050 (and
- * later) adheres to the PCI-PCI bridge specification.  This says that
- * the interrupts on the other side of a bridge are swizzled in the
- * following manner:
- *
- * Dev    Interrupt   Interrupt
- *        Pin on      Pin on
- *        Device      Connector
- *
- *   4    A           A
- *        B           B
- *        C           C
- *        D           D
- *
- *   5    A           B
- *        B           C
- *        C           D
- *        D           A
- *
- *   6    A           C
- *        B           D
- *        C           A
- *        D           B
- *
- *   7    A           D
- *        B           A
- *        C           B
- *        D           C
- *
- * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
- * Thus, each swizzle is ((pin-1) + (device#-4)) % 4
- */
-
-/*
- * This routine handles multiple bridges.
- */
-static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	if (*pinp == 0)
-		*pinp = 1;
-
-	return pci_common_swizzle(dev, pinp);
-}
-
-static struct hw_pci pci_v3 __initdata = {
-	.swizzle		= pci_v3_swizzle,
-	.setup			= pci_v3_setup,
-	.nr_controllers		= 1,
-	.ops			= &pci_v3_ops,
-	.preinit		= pci_v3_preinit,
-	.postinit		= pci_v3_postinit,
-};
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource *res;
-	int irq, ret;
-
-	/* Remap the Integrator system controller */
-	ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
-	if (!ap_syscon_base) {
-		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
-		return -ENODEV;
-	}
-
-	/* Device tree probe path */
-	if (!np) {
-		dev_err(&pdev->dev, "no device tree node for PCIv3\n");
-		return -ENODEV;
-	}
-
-	if (of_pci_range_parser_init(&parser, np))
-		return -EINVAL;
-
-	/* Get base for bridge registers */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "unable to obtain PCIv3 base\n");
-		return -ENODEV;
-	}
-	pci_v3_base = devm_ioremap(&pdev->dev, res->start,
-				   resource_size(res));
-	if (!pci_v3_base) {
-		dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
-		return -ENODEV;
-	}
-
-	/* Get and request error IRQ resource */
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n");
-		return -ENODEV;
-	}
-	ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0,
-			"PCIv3 error", NULL);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret);
-		return ret;
-	}
-
-	for_each_of_pci_range(&parser, &range) {
-		if (!range.flags) {
-			ret = of_pci_range_to_resource(&range, np, &conf_mem);
-			conf_mem.name = "PCIv3 config";
-		}
-		if (range.flags & IORESOURCE_IO) {
-			ret = of_pci_range_to_resource(&range, np, &io_mem);
-			io_mem.name = "PCIv3 I/O";
-		}
-		if ((range.flags & IORESOURCE_MEM) &&
-			!(range.flags & IORESOURCE_PREFETCH)) {
-			non_mem_pci = range.pci_addr;
-			non_mem_pci_sz = range.size;
-			ret = of_pci_range_to_resource(&range, np, &non_mem);
-			non_mem.name = "PCIv3 non-prefetched mem";
-		}
-		if ((range.flags & IORESOURCE_MEM) &&
-			(range.flags & IORESOURCE_PREFETCH)) {
-			pre_mem_pci = range.pci_addr;
-			pre_mem_pci_sz = range.size;
-			ret = of_pci_range_to_resource(&range, np, &pre_mem);
-			pre_mem.name = "PCIv3 prefetched mem";
-		}
-
-		if (ret < 0) {
-			dev_err(&pdev->dev, "missing ranges in device node\n");
-			return ret;
-		}
-	}
-
-	pci_v3.map_irq = of_irq_parse_and_map_pci;
-	pci_common_init_dev(&pdev->dev, &pci_v3);
-
-	return 0;
-}
-
-static const struct of_device_id pci_ids[] = {
-	{ .compatible = "v3,v360epc-pci", },
-	{},
-};
-
-static struct platform_driver pci_v3_driver = {
-	.driver = {
-		.name = "pci-v3",
-		.of_match_table = pci_ids,
-	},
-};
-
-static int __init pci_v3_init(void)
-{
-	return platform_driver_probe(&pci_v3_driver, pci_v3_probe);
-}
-
-subsys_initcall(pci_v3_init);
-
-/*
- * Static mappings for the PCIv3 bridge
- *
- * e8000000	40000000	PCI memory		PHYS_PCI_MEM_BASE	(max 512M)
- * ec000000	61000000	PCI config space	PHYS_PCI_CONFIG_BASE	(max 16M)
- * fee00000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
- */
-static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = {
-	{
-		.virtual	= (unsigned long)PCI_MEMORY_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= (unsigned long)PCI_CONFIG_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}
-};
-
-int __init pci_v3_early_init(void)
-{
-	iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc));
-	vga_base = (unsigned long)PCI_MEMORY_VADDR;
-	pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
-	return 0;
-}
diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h
deleted file mode 100644
index 06a9e2e7d007..000000000000
--- a/arch/arm/mach-integrator/pci_v3.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Simple oneliner include to the PCIv3 early init */
-#ifdef CONFIG_PCI
-extern int pci_v3_early_init(void);
-#else
-static inline int pci_v3_early_init(void)
-{
-	return 0;
-}
-#endif