ARM: imx: rename mach dir for mx21 and mx27 to mach-imx

Finally all imx code should end up there, start with mach-mx2.  While
touching all files rename some files to use a hyphen instead of an
underscore.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

1 files changed, 373 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
new file mode 100644
index 000000000000..2183e3d4875a
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -0,0 +1,373 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+	.width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx27ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx27ads_flash_resource,
+};
+
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx27ads_nor_mtd_device,
+	&mxc_fec_device,
+	&mxc_w1_master_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mx27ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+	unsigned long fref = 26000000;
+
+	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+		fref = 27000000;
+
+	mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+	.init	= mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+	{
+		.virtual = PBC_BASE_ADDRESS,
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+		.length = SZ_1M,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx27ads_map_io(void)
+{
+	mx27_map_io();
+	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27ads_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27ads_board_init,
+	.timer          = &mx27ads_timer,
+MACHINE_END