Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree conversions (part 2) from Olof Johansson:
 "These continue the device tree work from part 1, this set is for the
  tegra, mxs and imx platforms, all of which have dependencies on clock
  or pinctrl changes submitted earlier."

Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: dt: tegra: invert status=disable vs status=okay
  ARM: dt: tegra: consistent basic property ordering
  ARM: dt: tegra: sort nodes based on bus order
  ARM: dt: tegra: remove duplicate device_type property
  ARM: dt: tegra: consistenly use lower-case for hex constants
  ARM: dt: tegra: format regs properties consistently
  ARM: dt: tegra: gpio comment cleanup
  ARM: dt: tegra: remove unnecessary unit addresses
  ARM: dt: tegra: whitespace cleanup
  ARM: dt: tegra cardhu: fix typo in SDHCI node name
  ARM: dt: tegra: cardhu: register core regulator tps62361
  ARM: dt: tegra30.dtsi: Add SMMU node
  ARM: dt: tegra20.dtsi: Add GART node
  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra: Add device tree support for AHB
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ...

1 files changed, 46 insertions, 9 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3df360a52c17..b47e98b7d539 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -64,18 +66,53 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	/* min rx data delay */
-	phy_write(phydev, 0x0b, 0x8105);
-	phy_write(phydev, 0x0c, 0x0000);
+	if (IS_ENABLED(CONFIG_PHYLIB)) {
+		/* min rx data delay */
+		phy_write(phydev, 0x0b, 0x8105);
+		phy_write(phydev, 0x0c, 0x0000);
 
-	/* max rx/tx clock delay, min rx/tx control delay */
-	phy_write(phydev, 0x0b, 0x8104);
-	phy_write(phydev, 0x0c, 0xf0f0);
-	phy_write(phydev, 0x0b, 0x104);
+		/* max rx/tx clock delay, min rx/tx control delay */
+		phy_write(phydev, 0x0b, 0x8104);
+		phy_write(phydev, 0x0c, 0xf0f0);
+		phy_write(phydev, 0x0b, 0x104);
+	}
 
 	return 0;
 }
 
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+	struct clk *cko1_sel, *ahb, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	ahb = clk_get_sys(NULL, "ahb");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+		pr_err("cko1 setup failed!\n");
+		goto put_clk;
+	}
+	clk_set_parent(cko1_sel, ahb);
+	rate = clk_round_rate(cko1, 16000000);
+	clk_set_rate(cko1, rate);
+	clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(ahb))
+		clk_put(ahb);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
+static void __init imx6q_sabrelite_init(void)
+{
+	if (IS_ENABLED(CONFIG_PHYLIB))
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+	imx6q_sabrelite_cko1_setup();
+}
+
 static void __init imx6q_init_machine(void)
 {
 	/*
@@ -85,8 +122,7 @@ static void __init imx6q_init_machine(void)
 	pinctrl_provide_dummies();
 
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-					   ksz9021rn_phy_fixup);
+		imx6q_sabrelite_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
@@ -139,6 +175,7 @@ static struct sys_timer imx6q_timer = {
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6q-arm2",
 	"fsl,imx6q-sabrelite",
+	"fsl,imx6q-sabresd",
 	"fsl,imx6q",
 	NULL,
 };