ARM: i.MX: Remove mach-cpuimx27sd board file

eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

1 files changed, 0 insertions, 321 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644
index e6d4b9929571..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-	/* OTG */
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= eukrea_cpuimx27_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= eukrea_cpuimx27_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	/* in which case UART4 is also used for Bluetooth */
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
-	serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
-	serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
-	serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
-	platform_device_register(&serial_device);
-#endif
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	} else {
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= eukrea_cpuimx27_timer_init,
-	.init_machine = eukrea_cpuimx27_init,
-	.restart	= mxc_restart,
-MACHINE_END