Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

1 files changed, 37 insertions, 2 deletions

diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 873c708fd340..5a12dc26f496 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -498,6 +500,37 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+	{
+		.name			= "origen::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= EXYNOS4_GPX1(3),
+		.active_low		= 1,
+	},
+	{
+		.name			= "origen::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= EXYNOS4_GPX1(4),
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+	.leds		= origen_gpio_leds,
+	.num_leds	= ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &origen_gpio_led_info,
+	},
+};
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -654,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -676,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
+	&origen_leds_gpio,
 	&origen_device_bluetooth,
 };
 
@@ -711,7 +746,7 @@ static void s5p_tv_setup(void)
 static void __init origen_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
@@ -743,7 +778,7 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);