Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "A large cleanup branch this release, with a healthy 10k negative line
  delta.

  Most of this is removal of legacy (non-DT) support of shmobile
  platforms.  There is also removal of two non-DT platforms on OMAP, and
  the plat-samsung directory is cleaned out by moving most of the
  previously shared-location-but-not-actually-shared files from there to
  the appropriate mach directories instead.

  There are other sets of changes in here as well:

   - Rob Herring removed use of set_irq_flags under all platforms and
     moved to genirq alternatives

   - a series of timer API conversions to set-state interface

   - ep93xx, nomadik and ux500 cleanups from Linus Walleij

   - __init annotation fixes from Nicolas Pitre

   + a bunch of other changes that all add up to a nice set of cleanups"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits)
  ARM/fb: ep93xx: switch framebuffer to use modedb only
  ARM: gemini: Setup timer3 as free running timer
  ARM: gemini: Use timer1 for clockevent
  ARM: gemini: Add missing register definitions for gemini timer
  ARM: ep93xx/timer: Migrate to new 'set-state' interface
  ARM: nomadik: push accelerometer down to boards
  ARM: nomadik: move l2x0 setup to device tree
  ARM: nomadik: selectively enable UART0 on boards
  ARM: nomadik: move hog code to use DT hogs
  ARM: shmobile: Fix mismerges
  ARM: ux500: simplify secondary CPU boot
  ARM: SAMSUNG: remove keypad-core header in plat-samsung
  ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
  ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
  ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
  ARM: SAMSUNG: local backlight header in mach-s3c64xx
  ARM: SAMSUNG: local ata-core header in mach-s3c64xx
  ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
  ARM: SAMSUNG: local spi-core header in mach-s3c24xx
  ARM: SAMSUNG: local nand-core header in mach-s3c24xx
  ...

1 files changed, 58 insertions, 5 deletions

diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 6bc1c181581d..5cced5988498 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -29,6 +29,8 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/mmc/host.h>
 
+#include <sound/cs4271.h>
+
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
@@ -104,8 +106,6 @@ static void vision_lcd_blank(int blank_mode, struct fb_info *info)
 }
 
 static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 	.setup		= vision_lcd_setup,
 	.teardown	= vision_lcd_teardown,
@@ -169,6 +169,35 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 };
 
 /*************************************************************************
+ * SPI CS4271 Audio Codec
+ *************************************************************************/
+static struct cs4271_platform_data vision_cs4271_data = {
+	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+};
+
+static int vision_cs4271_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+				GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void vision_cs4271_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_cs4271_hw = {
+	.setup		= vision_cs4271_hw_setup,
+	.cleanup	= vision_cs4271_hw_cleanup,
+	.cs_control	= vision_cs4271_hw_cs_control,
+};
+
+/*************************************************************************
  * SPI Flash
  *************************************************************************/
 #define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
@@ -262,12 +291,20 @@ static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
  *************************************************************************/
 static struct spi_board_info vision_spi_board_info[] __initdata = {
 	{
+		.modalias		= "cs4271",
+		.platform_data		= &vision_cs4271_data,
+		.controller_data	= &vision_cs4271_hw,
+		.max_speed_hz		= 6000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	}, {
 		.modalias		= "sst25l",
 		.platform_data		= &vision_spi_flash_data,
 		.controller_data	= &vision_spi_flash_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
-		.chip_select		= 0,
+		.chip_select		= 1,
 		.mode			= SPI_MODE_3,
 	}, {
 		.modalias		= "mmc_spi",
@@ -275,16 +312,31 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 		.controller_data	= &vision_spi_mmc_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
-		.chip_select		= 1,
+		.chip_select		= 2,
 		.mode			= SPI_MODE_3,
 	},
 };
 
 static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
+	.num_chipselect	= ARRAY_SIZE(vision_spi_board_info),
+	.use_dma	= 1,
 };
 
 /*************************************************************************
+ * I2S Audio
+ *************************************************************************/
+static struct platform_device vision_audio_device = {
+	.name		= "edb93xx-audio",
+	.id		= -1,
+};
+
+static void __init vision_register_i2s(void)
+{
+	ep93xx_register_i2s();
+	platform_device_register(&vision_audio_device);
+}
+
+/*************************************************************************
  * Machine Initialization
  *************************************************************************/
 static void __init vision_init_machine(void)
@@ -309,6 +361,7 @@ static void __init vision_init_machine(void)
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
 				ARRAY_SIZE(vision_spi_board_info));
+	vision_register_i2s();
 }
 
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")