ARM: 7038/1: mach-davinci: move GPIO driver to GPIO subsystem

As per example from the other ARM boards, push the DaVinci GPIO
driver down to the GPIO subsystem so it can be consolidated.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 1 insertions, 459 deletions

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1ca2bb3..8f3c8ee43ffa 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o dma.o usb.o common.o sram.o aemif.o
+			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
deleted file mode 100644
index a8066e8edade..000000000000
--- a/arch/arm/mach-davinci/gpio.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006-2007 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-struct davinci_gpio_regs {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-#define chip2controller(chip)	\
-	container_of(chip, struct davinci_gpio_controller, chip)
-
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static void __iomem *gpio_base;
-
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
-{
-	void __iomem *ptr;
-
-	if (gpio < 32 * 1)
-		ptr = gpio_base + 0x10;
-	else if (gpio < 32 * 2)
-		ptr = gpio_base + 0x38;
-	else if (gpio < 32 * 3)
-		ptr = gpio_base + 0x60;
-	else if (gpio < 32 * 4)
-		ptr = gpio_base + 0x88;
-	else if (gpio < 32 * 5)
-		ptr = gpio_base + 0xb0;
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
-{
-	struct davinci_gpio_regs __iomem *g;
-
-	g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
-
-	return g;
-}
-
-static int __init davinci_gpio_irq_setup(void);
-
-/*--------------------------------------------------------------------------*/
-
-/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
-static inline int __davinci_direction(struct gpio_chip *chip,
-			unsigned offset, bool out, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-	unsigned long flags;
-	u32 temp;
-	u32 mask = 1 << offset;
-
-	spin_lock_irqsave(&d->lock, flags);
-	temp = __raw_readl(&g->dir);
-	if (out) {
-		temp &= ~mask;
-		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	} else {
-		temp |= mask;
-	}
-	__raw_writel(temp, &g->dir);
-	spin_unlock_irqrestore(&d->lock, flags);
-
-	return 0;
-}
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	return __davinci_direction(chip, offset, false, 0);
-}
-
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	return __davinci_direction(chip, offset, true, value);
-}
-
-/*
- * Read the pin's value (works even if it's set up as output);
- * returns zero/nonzero.
- *
- * Note that changes are synched to the GPIO clock, so reading values back
- * right after you've set them may give old values.
- */
-static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	return (1 << offset) & __raw_readl(&g->in_data);
-}
-
-/*
- * Assuming the pin is muxed as a gpio output, set its output value.
- */
-static void
-davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
-}
-
-static int __init davinci_gpio_setup(void)
-{
-	int i, base;
-	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs *regs;
-
-	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
-		return 0;
-
-	/*
-	 * The gpio banks conceptually expose a segmented bitmap,
-	 * and "ngpio" is one more than the largest zero-based
-	 * bit index that's valid.
-	 */
-	ngpio = soc_info->gpio_num;
-	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
-		return -EINVAL;
-	}
-
-	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
-		ngpio = DAVINCI_N_GPIO;
-
-	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!gpio_base))
-		return -ENOMEM;
-
-	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		chips[i].chip.label = "DaVinci";
-
-		chips[i].chip.direction_input = davinci_direction_in;
-		chips[i].chip.get = davinci_gpio_get;
-		chips[i].chip.direction_output = davinci_direction_out;
-		chips[i].chip.set = davinci_gpio_set;
-
-		chips[i].chip.base = base;
-		chips[i].chip.ngpio = ngpio - base;
-		if (chips[i].chip.ngpio > 32)
-			chips[i].chip.ngpio = 32;
-
-		spin_lock_init(&chips[i].lock);
-
-		regs = gpio2regs(base);
-		chips[i].regs = regs;
-		chips[i].set_data = &regs->set_data;
-		chips[i].clr_data = &regs->clr_data;
-		chips[i].in_data = &regs->in_data;
-
-		gpiochip_add(&chips[i].chip);
-	}
-
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
-	davinci_gpio_irq_setup();
-	return 0;
-}
-pure_initcall(davinci_gpio_setup);
-
-/*--------------------------------------------------------------------------*/
-/*
- * We expect irqs will normally be set up as input pins, but they can also be
- * used as output pins ... which is convenient for testing.
- *
- * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead.
- *
- * All those INTC hookups (direct, plus several IRQ banks) can also
- * serve as EDMA event triggers.
- */
-
-static void gpio_irq_disable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	__raw_writel(mask, &g->clr_falling);
-	__raw_writel(mask, &g->clr_rising);
-}
-
-static void gpio_irq_enable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-	unsigned status = irqd_get_trigger_type(d);
-
-	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-	if (!status)
-		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-
-	if (status & IRQ_TYPE_EDGE_FALLING)
-		__raw_writel(mask, &g->set_falling);
-	if (status & IRQ_TYPE_EDGE_RISING)
-		__raw_writel(mask, &g->set_rising);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_enable	= gpio_irq_enable,
-	.irq_disable	= gpio_irq_disable,
-	.irq_set_type	= gpio_irq_type,
-	.flags		= IRQCHIP_SET_TYPE_MASKED,
-};
-
-static void
-gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
-	struct davinci_gpio_regs __iomem *g;
-	u32 mask = 0xffff;
-	struct davinci_gpio_controller *d;
-
-	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
-	g = (struct davinci_gpio_regs __iomem *)d->regs;
-
-	/* we only care about one bank */
-	if (irq & 1)
-		mask <<= 16;
-
-	/* temporarily mask (level sensitive) parent IRQ */
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-	while (1) {
-		u32		status;
-		int		n;
-		int		res;
-
-		/* ack any irqs */
-		status = __raw_readl(&g->intstat) & mask;
-		if (!status)
-			break;
-		__raw_writel(status, &g->intstat);
-
-		/* now demux them to the right lowlevel handler */
-		n = d->irq_base;
-		if (irq & 1) {
-			n += 16;
-			status >>= 16;
-		}
-
-		while (status) {
-			res = ffs(status);
-			n += res;
-			generic_handle_irq(n - 1);
-			status >>= res;
-		}
-	}
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-	/* now it may re-trigger */
-}
-
-static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-
-	if (d->irq_base >= 0)
-		return d->irq_base + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	/* NOTE:  we assume for now that only irqs in the first gpio_chip
-	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
-	 */
-	if (offset < soc_info->gpio_unbanked)
-		return soc_info->gpio_irq + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
-
-	return 0;
-}
-
-/*
- * NOTE:  for suspend/resume, probably best to make a platform_device with
- * suspend_late/resume_resume calls hooking into results of the set_wake()
- * calls ... so if no gpios are wakeup events the clock can be disabled,
- * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * (dm6446) can be set appropriately for GPIOV33 pins.
- */
-
-static int __init davinci_gpio_irq_setup(void)
-{
-	unsigned	gpio, irq, bank;
-	struct clk	*clk;
-	u32		binten = 0;
-	unsigned	ngpio, bank_irq;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs	__iomem *g;
-
-	ngpio = soc_info->gpio_num;
-
-	bank_irq = soc_info->gpio_irq;
-	if (bank_irq == 0) {
-		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
-		return -EINVAL;
-	}
-
-	clk = clk_get(NULL, "gpio");
-	if (IS_ERR(clk)) {
-		printk(KERN_ERR "Error %ld getting gpio clock?\n",
-		       PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-	clk_enable(clk);
-
-	/* Arrange gpio_to_irq() support, handling either direct IRQs or
-	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
-	 * IRQs, while the others use banked IRQs, would need some setup
-	 * tweaks to recognize hardware which can do that.
-	 */
-	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
-		chips[bank].chip.to_irq = gpio_to_irq_banked;
-		chips[bank].irq_base = soc_info->gpio_unbanked
-			? -EINVAL
-			: (soc_info->intc_irq_num + gpio);
-	}
-
-	/*
-	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
-	 * controller only handling trigger modes.  We currently assume no
-	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
-	 */
-	if (soc_info->gpio_unbanked) {
-		static struct irq_chip gpio_irqchip_unbanked;
-
-		/* pass "bank 0" GPIO IRQs to AINTC */
-		chips[0].chip.to_irq = gpio_to_irq_unbanked;
-		binten = BIT(0);
-
-		/* AINTC handles mask/unmask; GPIO handles triggering */
-		irq = bank_irq;
-		gpio_irqchip_unbanked = *irq_get_chip(irq);
-		gpio_irqchip_unbanked.name = "GPIO-AINTC";
-		gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
-
-		/* default trigger: both edges */
-		g = gpio2regs(0);
-		__raw_writel(~0, &g->set_falling);
-		__raw_writel(~0, &g->set_rising);
-
-		/* set the direct IRQs up to use that irqchip */
-		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
-			irq_set_chip(irq, &gpio_irqchip_unbanked);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
-		}
-
-		goto done;
-	}
-
-	/*
-	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
-	 * then chain through our own handler.
-	 */
-	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
-			gpio < ngpio;
-			bank++, bank_irq++) {
-		unsigned		i;
-
-		/* disabled by default, enabled only as needed */
-		g = gpio2regs(gpio);
-		__raw_writel(~0, &g->clr_falling);
-		__raw_writel(~0, &g->clr_rising);
-
-		/* set up all irqs in this bank */
-		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-
-		/*
-		 * Each chip handles 32 gpios, and each irq bank consists of 16
-		 * gpio irqs. Pass the irq bank's corresponding controller to
-		 * the chained irq handler.
-		 */
-		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
-
-		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
-			irq_set_chip(irq, &gpio_irqchip);
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_handler(irq, handle_simple_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-
-		binten |= BIT(bank);
-	}
-
-done:
-	/* BINTEN -- per-bank interrupt enable. genirq would also let these
-	 * bits be set/cleared dynamically.
-	 */
-	__raw_writel(binten, gpio_base + 0x08);
-
-	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
-
-	return 0;
-}