diff options
| author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2012-02-22 20:50:54 +0400 |
|---|---|---|
| committer | Nicolas Ferre <nicolas.ferre@atmel.com> | 2012-02-23 12:26:41 +0400 |
| commit | 8ff12ad3df62ee343d5f5ec29572b9d2c5c2cedd (patch) | |
| tree | 96a4c446fc380bffb040418beffbc3ba7cc438b1 /arch/arm/mach-at91/pm_slowclock.S | |
| parent | 0dcfed1486739afdce053ebdccac28076e9d9e1f (diff) | |
| download | linux-8ff12ad3df62ee343d5f5ec29572b9d2c5c2cedd.tar.xz | |
ARM: at91/pm_slowclock: function slow_clock() accepts parameters
Change slow_clock()/at91_slow_clock() prototype to accept the PMC
base address and one or two RAM controller addresses by parameters.
The r0, r1 and r2 registers are used differently and preserved during
function call.
Those values are defined in pm.c and slow_clock() function is called
from there with its new parameters.
This will allow to have a soc independent pm_slowclock.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Ached-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'arch/arm/mach-at91/pm_slowclock.S')
| -rw-r--r-- | arch/arm/mach-at91/pm_slowclock.S | 41 |
1 files changed, 9 insertions, 32 deletions
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index c802d309582f..e31a5f222d86 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -46,11 +46,11 @@ #define PLLALOCK_TIMEOUT 1000 #define PLLBLOCK_TIMEOUT 1000 -pmc .req r1 -sdramc .req r2 +pmc .req r0 +sdramc .req r1 +ramc1 .req r2 tmp1 .req r3 tmp2 .req r4 -ramc1 .req r5 /* * Wait until master clock is ready (after switching master clock source) @@ -110,21 +110,19 @@ ramc1 .req r5 .text +/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, void __iomem *ramc1) */ ENTRY(at91_slow_clock) /* Save registers on stack */ - stmfd sp!, {r0 - r12, lr} + stmfd sp!, {r3 - r12, lr} /* * Register usage: - * R1 = Base address of AT91_PMC - * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R0 = Base address of AT91_PMC + * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R2 = Base address of second RAM Controller or 0 if not present * R3 = temporary register * R4 = temporary register - * R5 = Base address of second RAM Controller or 0 if not present */ - ldr pmc, .at91_va_base_pmc - ldr sdramc, .at91_va_base_sdramc - ldr ramc1, .at91_va_base_ramc1 /* Drain write buffer */ mov tmp1, #0 @@ -283,7 +281,7 @@ ENTRY(at91_slow_clock) #endif /* Restore registers, and return */ - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r3 - r12, pc} .saved_mckr: @@ -301,26 +299,5 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr1: .word 0 -.at91_va_base_pmc: - .word AT91_VA_BASE_SYS + AT91_PMC - -#ifdef CONFIG_ARCH_AT91RM9200 -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91SAM9G45) -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 -#else -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -#endif - -.at91_va_base_ramc1: -#if defined(CONFIG_ARCH_AT91SAM9G45) - .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 -#else - .word 0 -#endif - ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock |