ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files

Remove old board files that use at91sam9260 or at91sam9g20 Atmel SoCs. The
device tree is mature on these SoCs. It must be used now.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 0 insertions, 228 deletions

diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
deleted file mode 100644
index 9c26b94ce448..000000000000
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- *                     taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/*
- * copied and adjusted from board-stamp9g20.c
- * by Peter Gsellmann <pgsellmann@portner-elektronik.at>
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "stamp9g20.h"
-#include "gpio.h"
-
-
-static void __init pcontrol_g20_init_early(void)
-{
-	stamp9g20_init_early();
-}
-
-static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
-	.ncs_read_setup		= 16,
-	.nrd_setup		= 18,
-	.ncs_write_setup	= 16,
-	.nwe_setup		= 18,
-
-	.ncs_read_pulse		= 63,
-	.nrd_pulse		= 55,
-	.ncs_write_pulse	= 63,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 127,
-	.write_cycle		= 127,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
-			| AT91_SMC_DBW_8 | AT91_SMC_PS_4
-			| AT91_SMC_TDFMODE,
-	.tdf_cycles		= 3,
-}, {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 0,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 8,
-	.nrd_pulse		= 8,
-	.ncs_write_pulse	= 5,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 8,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
-			| AT91_SMC_DBW_16 | AT91_SMC_PS_8
-			| AT91_SMC_TDFMODE,
-	.tdf_cycles		= 1,
-} };
-
-static void __init add_device_pcontrol(void)
-{
-	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
-	sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
-	/* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A  D4 ) */
-	sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
-	.vbus_pin	= AT91_PIN_PA22,	/* Detect +5V bus voltage */
-	.pullup_pin	= AT91_PIN_PA4,		/* K-state, active low */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA28,
-	.is_rmii	= 1,
-};
-
-
-/*
- * I2C devices: eeprom and phy/switch
- */
-static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = {
-{		/* D7  address width=2, 8KiB */
-	I2C_BOARD_INFO("24c64", 0x50)
-}, {		/* D8  address width=1, 1 byte has 32 bits! */
-	I2C_BOARD_INFO("lan9303", 0x0a)
-}, };
-
-
-/*
- * LEDs
- */
-static struct gpio_led pcontrol_g20_leds[] = {
-	{
-		.name			= "LED1",	/* red  H5 */
-		.gpio			= AT91_PIN_PB18,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* supervisor */
-	}, {
-		.name			= "LED2",	/* yellow  H7 */
-		.gpio			= AT91_PIN_PB19,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",	/* SD-card activity */
-	}, {
-		.name			= "LED3",	/* green  H2 */
-		.gpio			= AT91_PIN_PB20,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",	/* blinky */
-	}, {
-		.name			= "LED4",	/* red  H3 */
-		.gpio			= AT91_PIN_PC6,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* connection lost */
-	}, {
-		.name			= "LED5",	/* yellow  H6 */
-		.gpio			= AT91_PIN_PC7,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* unsent data */
-	}, {
-		.name			= "LED6",	/* green  H1 */
-		.gpio			= AT91_PIN_PC9,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* snafu */
-	}
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info pcontrol_g20_spi_devices[] = {
-	{
-		.modalias	= "spidev",	/* HMI port  X4 */
-		.chip_select	= 1,
-		.max_speed_hz	= 50 * 1000 * 1000,
-		.bus_num	= 0,
-	}, {
-		.modalias	= "spidev",	/* piggyback  A2 */
-		.chip_select	= 0,
-		.max_speed_hz	= 50 * 1000 * 1000,
-		.bus_num	= 1,
-	},
-};
-
-
-static void __init pcontrol_g20_board_init(void)
-{
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
-	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-	stamp9g20_board_init();
-	at91_add_device_usbh(&usbh_data);
-	at91_add_device_eth(&macb_data);
-	at91_add_device_i2c(pcontrol_g20_i2c_devices,
-		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_device_pcontrol();
-	at91_add_device_spi(pcontrol_g20_spi_devices,
-		ARRAY_SIZE(pcontrol_g20_spi_devices));
-	at91_add_device_udc(&pcontrol_g20_udc_data);
-	at91_gpio_leds(pcontrol_g20_leds,
-		ARRAY_SIZE(pcontrol_g20_leds));
-	/* piggyback  A2 */
-	at91_set_gpio_output(AT91_PIN_PB31, 1);
-}
-
-
-MACHINE_START(PCONTROL_G20, "PControl G20")
-	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.init_time	= at91_init_time,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= pcontrol_g20_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= pcontrol_g20_board_init,
-MACHINE_END