ARM: at91: remove at91rm9200 legacy boards files

Remove old board files that use at91rm9200 Atmel SoC. The
device tree is mature on this SoCs. It must be used now.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>

1 files changed, 0 insertions, 160 deletions

diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644
index 4e75321a8f2a..000000000000
--- a/arch/arm/mach-at91/board-eco920.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eco920_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
-	.vbus_pin	= AT91_PIN_PB12,
-	.pullup_pin	= AT91_PIN_PB13,
-};
-
-static struct mci_platform_data __initdata eco920_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 1,
-		.detect_pin	= -EINVAL,
-		.wp_pin		= -EINVAL,
-	},
-};
-
-static struct physmap_flash_data eco920_flash_data = {
-	.width  = 2,
-};
-
-static struct resource eco920_flash_resource = {
-	.start          = 0x11000000,
-	.end            = 0x11ffffff,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &eco920_flash_data,
-	},
-	.resource       = &eco920_flash_resource,
-	.num_resources  = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "tlv5638",
-		.chip_select	= 3,
-		.max_speed_hz	= 20 * 1000 * 1000,
-		.mode		= SPI_CPHA,
-	},
-};
-
-/*
- * LEDs
- */
-static struct gpio_led eco920_leds[] = {
-	{       /* D1 */
-		.name                   = "led1",
-		.gpio                   = AT91_PIN_PB0,
-		.active_low             = 1,
-		.default_trigger        = "heartbeat",
-	},
-	{       /* D2 */
-		.name                   = "led2",
-		.gpio                   = AT91_PIN_PB1,
-		.active_low             = 1,
-		.default_trigger        = "timer",
-	}
-};
-
-static void __init eco920_board_init(void)
-{
-	/* DBGU on ttyS0. (Rx & Tx only */
-	at91_register_uart(0, 0, 0);
-	at91_add_device_serial();
-	at91_add_device_eth(&eco920_eth_data);
-	at91_add_device_usbh(&eco920_usbh_data);
-	at91_add_device_udc(&eco920_udc_data);
-
-	at91_add_device_mci(0, &eco920_mci0_data);
-	platform_device_register(&eco920_flash);
-
-	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
-				| AT91_SMC_RWSETUP_(1)
-				| AT91_SMC_DBW_8
-				| AT91_SMC_WSEN
-				| AT91_SMC_NWS_(15));
-
-	at91_set_A_periph(AT91_PIN_PC6, 1);
-
-	at91_set_gpio_input(AT91_PIN_PA23, 0);
-	at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
-	at91_ramc_write(0, AT91_SMC_CSR(3),
-		AT91_SMC_DBW_16  |	/* 16 bit */
-		AT91_SMC_WSEN    |
-		AT91_SMC_NWS_(5) |	/* wait states */
-		AT91_SMC_TDF_(1)	/* float time */
-	);
-
-	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
-	/* LEDs */
-	at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
-}
-
-MACHINE_START(ECO920, "eco920")
-	/* Maintainer: Sascha Hauer */
-	.init_time	= at91rm9200_timer_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= eco920_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= eco920_board_init,
-MACHINE_END