Merge tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

A lot more love for rk3288 in general and veyron specially with changes
all over the place.

* tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
  ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices
  ARM: dts: rockchip: Add HDMI i2c unwedging for rk3288-veyron
  ARM: dts: rockchip: Add unwedge pinctrl entries for dw_hdmi on rk3288
  ARM: dts: rockchip: Switch to builtin HDMI DDC bus on rk3288-veyron
  ARM: dts: rockchip: Add pin names for rk3288-veyron jaq, mickey, speedy
  ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3
  ARM: dts: rockchip: Configure the GPU thermal zone for mickey
  ARM: dts: rockchip: Use the GPU to cool CPU thermal zone of veyron mickey
  ARM: dts: rockchip: remove GPU 500 MHz OPP on rk3288
  ARM: dts: rockchip: Use GPU as cooling device for the GPU thermal zone of the rk3288
  ARM: dts: rockchip: Add #cooling-cells entry for rk3288 GPU
  ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend
  ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry
  ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie
  ARM: dts: raise GPU trip point temperature for speedy to 80 degC
  ARM: dts: rockchip: raise GPU trip point temperatures for veyron
  ARM: dts: rockchip: raise CPU trip point temperature for veyron to 100 degC
  ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200
  ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again
  ARM: dts: rockchip: Remove bogus 'i2s_clk_out' from rk3288-veyron-mickey
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

9 files changed, 1143 insertions, 66 deletions

diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index fbef34578100..5727017f34b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -70,6 +70,21 @@
 		pinctrl-0 = <&ac_present_ap>;
 	};
 
+	lid_switch: lid-switch {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_lid_int_l>;
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <1>;
+		};
+	};
+
 	panel: panel {
 		compatible ="innolux,n116bge", "simple-panel";
 		status = "okay";
@@ -149,18 +164,6 @@
 	status = "okay";
 };
 
-&gpio_keys {
-	pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
-	lid {
-		label = "Lid";
-		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-		linux,code = <0>; /* SW_LID */
-		linux,input-type = <5>; /* EV_SW */
-		debounce-interval = <1>;
-	};
-};
-
 &pwm0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index e248f55ee8d2..fcd119168cb6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -135,6 +135,213 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",	/* Maybe missing from mighty? */
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "ALS_INT",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "SDMMC_WP",		/* mighty only */
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFALUT1",		/* nFAULT1 on jaq */
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	backlight {
 		bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index b1613af83d5d..164561f04c1d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -103,6 +103,213 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFAULT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFAULT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	backlight {
 		bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index e852594417b5..aa352d40c991 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -75,9 +75,7 @@
 	cooling-maps {
 		/*
 		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
-		 * and don't let the GPU go faster than 400 MHz.  Note that we
-		 * won't throttle the GPU lower than 400 MHz due to CPU
-		 * heat--we'll let the GPU do the rest itself.
+		 * and don't let the GPU go faster than 400 MHz.
 		 */
 		cpu_warm_limit_cpu {
 			trip = <&cpu_alert_warm>;
@@ -86,6 +84,10 @@
 					 <&cpu2 THERMAL_NO_LIMIT 4>,
 					 <&cpu3 THERMAL_NO_LIMIT 4>;
 		};
+		cpu_warm_limit_gpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device = <&gpu 1 1>;
+		};
 
 		/*
 		 * Add some discrete steps to help throttling system deal
@@ -125,11 +127,80 @@
 					 <&cpu2 8 THERMAL_NO_LIMIT>,
 					 <&cpu3 8 THERMAL_NO_LIMIT>;
 		};
+
+		/* At very hot, don't let GPU go over 300 MHz */
+		cpu_very_hot_limit_gpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device = <&gpu 2 2>;
+		};
 	};
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
+&gpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		gpu_alert_warmish: gpu_alert_warmish {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_warm: gpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_hotter: gpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_very_very_hot: gpu_alert_very_very_hot {
+			temperature = <86000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/* After 1st level throttle the GPU down to as low as 400 MHz */
+		gpu_warmish_limit_gpu {
+			trip = <&gpu_alert_warmish>;
+			cooling-device = <&gpu THERMAL_NO_LIMIT 1>;
+		};
+
+		/*
+		 * Slightly after we throttle the GPU, we'll also make sure that
+		 * the CPU can't go faster than 1.4 GHz.  Note that we won't
+		 * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll
+		 * let the CPU do the rest itself.
+		 */
+		gpu_warm_limit_cpu {
+			trip = <&gpu_alert_warm>;
+			cooling-device = <&cpu0 4 4>,
+					 <&cpu1 4 4>,
+					 <&cpu2 4 4>,
+					 <&cpu3 4 4>;
+		};
+
+		/* When hot, GPU goes down to 300 MHz */
+		gpu_hotter_limit_gpu {
+			trip = <&gpu_alert_hotter>;
+			cooling-device = <&gpu 2 2>;
+		};
+
+		/* When really hot, don't let GPU go _above_ 300 MHz */
+		gpu_very_very_hot_limit_gpu {
+			trip = <&gpu_alert_very_very_hot>;
+			cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+		};
+	};
 };
 
 &i2c2 {
@@ -142,8 +213,6 @@
 
 &i2s {
 	status = "okay";
-	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
 };
 
 &rk808 {
@@ -183,6 +252,157 @@
 	};
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "",
+			  "",
+			  "",
+			  "PMIC_INT_L",
+			  "POWER_BUTTON_L",
+			  "",
+			  "",
+
+			  "",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OT_RESET",
+			  "",
+			  "",
+			  "AP_WARM_RESET_H",
+			  "",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "",
+			  "nFALUT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS_L",
+			  "UART0_RTS_L",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "PWM_LOG",
+			  "",
+			  "",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "HDMI_WAKE",
+			  "POWER_HDMI_ON",
+			  "DVS1",
+			  "",
+			  "",
+			  "DVS2",
+
+			  "HDMI_CEC",
+			  "",
+			  "",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	hdmi {
 		power_hdmi_on: power-hdmi-on {
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 468a1818545d..b2cc70a08554 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -48,6 +48,26 @@
 		regulator-boot-on;
 		vin-supply = <&vcc18_wl>;
 	};
+
+	volume_buttons: volume-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&volum_down_l &volum_up_l>;
+
+		volum_down {
+			label = "Volum_down";
+			gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <100>;
+		};
+
+		volum_up {
+			label = "Volum_up";
+			gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <100>;
+		};
+	};
 };
 
 &backlight {
@@ -90,28 +110,6 @@
 	pwm-off-delay-ms = <200>;
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
-&gpio_keys {
-	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
-
-	volum_down {
-		label = "Volum_down";
-		gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_VOLUMEDOWN>;
-		debounce-interval = <100>;
-	};
-
-	volum_up {
-		label = "Volum_up";
-		gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_VOLUMEUP>;
-		debounce-interval = <100>;
-	};
-};
-
 &i2c_tunnel {
 	battery: bq27500@55 {
 		compatible = "ti,bq27500";
@@ -188,6 +186,218 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PROCHOT#",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN",
+			  "TOUCH_INT",
+			  "TOUCH_RST",
+
+			  "I2C3_SCL_TP",
+			  "I2C3_SDA_TP";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "dev_wake",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "Volum_Up#",
+			  "Volum_Down#",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "SDMMC_WP",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	backlight {
 		bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 9645be7b3d8c..9b6f4d9b03b6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -35,7 +35,7 @@
 	force-hpd;
 };
 
-&gpio_keys {
+&lid_switch {
 	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
 
 	power {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 2ac8748a3a0c..9b140db04456 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -64,6 +64,10 @@
 	temperature = <70000>;
 };
 
+&cpu_crit {
+	temperature = <90000>;
+};
+
 &edp {
 	/delete-property/pinctrl-names;
 	/delete-property/pinctrl-0;
@@ -71,6 +75,14 @@
 	force-hpd;
 };
 
+&gpu_alert0 {
+	temperature = <80000>;
+};
+
+&gpu_crit {
+	temperature = <90000>;
+};
+
 &panel {
 	power-supply= <&panel_regulator>;
 };
@@ -101,6 +113,213 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PWRLIMIT#_CPU",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "ALS_INT",		/* not connected */
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "",
+			  "EDP_HOTPLUG",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	backlight {
 		bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..3257ca90f0e8 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,11 +23,11 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	gpio_keys: gpio-keys {
+	power_button: power-button {
 		compatible = "gpio-keys";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key_l>;
+
 		power {
 			label = "Power";
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -123,6 +123,10 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&cpu_crit {
+	temperature = <100000>;
+};
+
 /* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
 &cpu_opp_table {
 	/delete-node/ opp-312000000;
@@ -162,8 +166,18 @@
 	status = "okay";
 };
 
+&gpu_alert0 {
+	temperature = <72500>;
+};
+
+&gpu_crit {
+	temperature = <100000>;
+};
+
 &hdmi {
-	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default", "unwedge";
+	pinctrl-0 = <&hdmi_ddc>;
+	pinctrl-1 = <&hdmi_ddc_unwedge>;
 	status = "okay";
 };
 
@@ -334,14 +348,6 @@
 	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
 };
 
-&i2c5 {
-	status = "okay";
-
-	clock-frequency = <100000>;
-	i2c-scl-falling-time-ns = <300>;
-	i2c-scl-rising-time-ns = <1000>;
-};
-
 &io_domains {
 	status = "okay";
 
@@ -394,6 +400,7 @@
 
 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-temp = <125000>;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aa017abf4f42..cc893e154fe5 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -231,6 +231,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
 	};
 
 	timer: timer@ff810000 {
@@ -551,10 +552,7 @@
 				map0 {
 					trip = <&gpu_alert0>;
 					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -682,7 +680,7 @@
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
-		clocks = <&cru PCLK_PWM>;
+		clocks = <&cru PCLK_RKPWM>;
 		clock-names = "pwm";
 		status = "disabled";
 	};
@@ -693,7 +691,7 @@
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
-		clocks = <&cru PCLK_PWM>;
+		clocks = <&cru PCLK_RKPWM>;
 		clock-names = "pwm";
 		status = "disabled";
 	};
@@ -704,7 +702,7 @@
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
-		clocks = <&cru PCLK_PWM>;
+		clocks = <&cru PCLK_RKPWM>;
 		clock-names = "pwm";
 		status = "disabled";
 	};
@@ -712,10 +710,10 @@
 	pwm3: pwm@ff680030 {
 		compatible = "rockchip,rk3288-pwm";
 		reg = <0x0 0xff680030 0x0 0x10>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
-		clocks = <&cru PCLK_PWM>;
+		clocks = <&cru PCLK_RKPWM>;
 		clock-names = "pwm";
 		status = "disabled";
 	};
@@ -1285,6 +1283,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		operating-points-v2 = <&gpu_opp_table>;
+		#cooling-cells = <2>; /* min followed by max */
 		power-domains = <&power RK3288_PD_GPU>;
 		status = "disabled";
 	};
@@ -1308,10 +1307,6 @@
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1200000>;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1250000>;
@@ -1552,6 +1547,15 @@
 				rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
 						<7 RK_PC4 2 &pcfg_pull_none>;
 			};
+
+			hdmi_ddc_unwedge: hdmi-ddc-unwedge {
+				rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
+						<7 RK_PC4 2 &pcfg_pull_none>;
+			};
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
 		};
 
 		pcfg_pull_up: pcfg-pull-up {