Merge tag 'at91-ab-4.8-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Merge "DT Changes for 4.8 #3" from Alexandre Belloni:
 - Lot of fixes for dtc warnings
 - Separate dtb compilation for ARMv4 and ARMv5

* tag 'at91-ab-4.8-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: Don't build unnecessary dtbs
  ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions
  ARM: dts: at91: at91sam9g25ek: fix isi endpoint node
  ARM: dts: at91: move isi definition to at91sam9g25ek
  ARM: dts: at91: fix i2c-gpio node name
  ARM: dts: at91: vinco: fix regulator name
  ARM: dts: at91: ariag25 : fix onewire node
  ARM: dts: at91: sama5d4_ma5d4evk: fix regulator names
  ARM: dts: at91: sama5d4_ma5d4: fix regulator names
  ARM: dts: at91: sama5d4_xplained: fix regulator names
  ARM: dts: at91: sama5d3_xplained: fix regulator name
  ARM: dts: at91: sama5d4ek: remove useless lcd_bus
  ARM: dts: at91: Fix USB endpoint nodes
  Documentation: dt: usb: atmel-usb: add unit-address
  ARM: dts: at91: Fix ADC trigger nodes
  Documentation: dt: iio: at91_adc: fix trigger node names

45 files changed, 238 insertions, 249 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b25cc6af35c8..9f0ae00cf159 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -7,9 +7,10 @@ dtb-$(CONFIG_MACH_ARTPEC6) += \
 dtb-$(CONFIG_MACH_ASM9260) += \
 	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+dtb-$(CONFIG_SOC_AT91RM9200) += \
 	at91rm9200ek.dtb \
-	mpa1600.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
 	animeo_ip.dtb \
 	at91-qil_a9260.dtb \
 	aks-cdu.dtb \
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index f16a9b85a450..4da011a7a698 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -169,7 +169,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 07c9bacf1ae6..50d5e719b451 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -125,7 +125,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
 		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 0e3f34e084b5..b4f147c193fd 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -96,7 +96,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		rtc: pcf8563@51 {
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 5ad3d90f9d39..8f019184fccf 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -178,7 +178,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 814753ab26a0..171243ca4f2f 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -99,7 +99,7 @@
 
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index f3e2b96c06a3..c51fc652f6c7 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -297,7 +297,7 @@
 		};
 	};
 
-	vcc_mmc0_reg: fixedregulator@0 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index 99d57131782f..a92c6e0ca854 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -109,7 +109,7 @@
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -118,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc0_reg: fixedregulator@1 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
 		regulator-name = "RST_n MCI0";
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index abaaba58fbec..eac4ea2744cc 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -159,7 +159,7 @@
 		};
 	};
 
-	vcc_mmc1_reg: fixedregulator@2 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index da84e65b56ef..ed7fce297738 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -252,7 +252,7 @@
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -261,7 +261,7 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc1_reg: fixedregulator@1 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 4e98cda97403..f8b96cef5e1a 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -69,26 +69,6 @@
 
 	ahb {
 		apb {
-			lcd_bus@f0000000 {
-				status = "okay";
-
-				lcd@f0000000 {
-					status = "okay";
-				};
-
-				lcdovl1@f0000140 {
-					status = "okay";
-				};
-
-				lcdovl2@f0000240 {
-					status = "okay";
-				};
-
-				lcdheo1@f0000340 {
-					status = "okay";
-				};
-			};
-
 			adc0: adc@fc034000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 6a366ee952a8..e0c0b2897a49 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -245,7 +245,7 @@
 
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index f6cb7a80a2f5..4e913c2ccb79 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -948,7 +948,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index af5ba315315f..a3e363d79122 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -938,25 +938,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0xd>;
 					trigger-external;
@@ -1017,7 +1013,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 0a29bd0dd9bf..2c87f58448e7 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -185,7 +185,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 5e09de4eb9cd..32752d7883f1 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -860,7 +860,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 93446420af25..aeb1a36373f4 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -1019,7 +1019,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 59df9d73d276..127cc42e9e29 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -215,7 +215,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 1395b30adad6..27847a47c108 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -176,7 +176,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 707fd4ea58f5..91a71774472e 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -26,7 +26,24 @@
 
 			i2c0: i2c@f8010000 {
 				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck0>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck0>;
+					assigned-clock-rates = <25000000>;
 					status = "okay";
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
 				};
 			};
 
@@ -37,6 +54,15 @@
 
 			isi: isi@f8048000 {
 				status = "okay";
+				port {
+					isi_0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 8837b7e4292c..b3501ae2a3bd 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1044,28 +1044,24 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1169,13 +1165,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1183,7 +1179,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1191,21 +1187,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1213,7 +1209,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1320,7 +1316,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 95569a87b6c9..3b3eb3edcb47 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -1030,7 +1030,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 6d829db4e887..70adf940d98c 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -265,25 +265,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0x13>;
 					trigger-external;
@@ -301,13 +297,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -315,7 +311,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -323,21 +319,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -345,7 +341,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1093,7 +1089,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
@@ -1107,7 +1103,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index f10566f759cd..2e567d90fba8 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -227,11 +227,11 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index cd0cd5fd09a3..ed4e4bd8a8f1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1048,29 +1048,25 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1119,13 +1115,13 @@
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1133,7 +1129,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1141,21 +1137,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1163,7 +1159,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1242,7 +1238,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
@@ -1257,7 +1253,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
 			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
@@ -1272,7 +1268,7 @@
 		status = "disabled";
 	};
 
-	i2c@2 {
+	i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 52425a4ca97e..696b8ba064a6 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -60,18 +60,6 @@
 				status = "okay";
 			};
 
-			isi: isi@f8048000 {
-				status = "disabled";
-				port {
-					isi_0: endpoint@0 {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
@@ -79,27 +67,6 @@
 					compatible = "wm8731";
 					reg = <0x1a>;
 				};
-
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "disabled";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
 			};
 
 			adc0: adc@f804c000 {
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 298ee2fd2b51..4687229a3ab9 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -83,7 +83,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		pcf8563@50 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index 312d3e80b538..20a4481b6e12 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -52,7 +52,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index 30e66e57870c..116ce78bea4f 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -52,7 +52,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 5d63206aab91..c885d2b153ca 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -117,13 +117,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -131,7 +131,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -139,7 +139,7 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -147,7 +147,7 @@
 				atmel,can-isoc;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -155,7 +155,7 @@
 				atmel,can-isoc;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -163,7 +163,7 @@
 				atmel,can-isoc;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -171,7 +171,7 @@
 				atmel,can-isoc;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -179,56 +179,56 @@
 				atmel,can-isoc;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 36301bd9a14a..4c84d333fc7e 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -326,26 +326,22 @@
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1341,13 +1337,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1355,7 +1351,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1363,84 +1359,84 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 04eec0dfcf7d..25e4c0b2d786 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index cbd6a3ff1545..c517b87a1de2 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index 878aa164275a..c8b8449fdc3e 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index e812f5c1bf70..6e261fcf576c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -9,6 +9,8 @@
 /dts-v1/;
 #include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6f9826..cd458b85a205 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -10,6 +10,8 @@
 #include "sama5d36.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 2cf9c3611db6..b5e111b29da1 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,40 +34,6 @@
 			spi0: spi@f0004000 {
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
 			};
-
-			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 89010422812d..6d252ad050f6 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -117,18 +117,6 @@
 				status = "okay";
 			};
 
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-					reg = <1>;
-				};
-			};
-
 			pinctrl@fffff200 {
 				board {
 					pinctrl_mmc0_cd: mmc0_cd {
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
new file mode 100644
index 000000000000..2fd14f371a04
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
@@ -0,0 +1,26 @@
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
new file mode 100644
index 000000000000..65aea7a75b1d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,48 @@
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 4e2cc30d6615..65e725fb5679 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -135,13 +135,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -149,7 +149,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -157,7 +157,7 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -165,7 +165,7 @@
 				atmel,can-isoc;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -173,7 +173,7 @@
 				atmel,can-isoc;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -181,7 +181,7 @@
 				atmel,can-isoc;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -189,7 +189,7 @@
 				atmel,can-isoc;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -197,56 +197,56 @@
 				atmel,can-isoc;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -1226,22 +1226,22 @@
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "disabled";
 
-				trigger@0 {
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 2f39f85158f7..9161cd9889b4 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -90,7 +90,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 0f3a02b336a2..7514b347cdd2 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -110,7 +110,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 94c615072f3b..bfc48a272417 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -138,7 +138,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 6156ee878345..088c2c3685ab 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -19,7 +19,7 @@
 		reg = <0x20000000 0x4000000>;
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;