ARM: nomadik: initial devicetree support

Support basic device tree boot on the Nomadik. Implement the
support in the cpu file with the intent of deleting the board
files later. At this stage IRQ controllers, system timer,
l2x0 cache, UARTs and thus console boot is fully functional.
Patch out the code adding devices by initcalls for now so
as not to disturb the boot.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 101 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40d984f..7bc5ba738041 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
new file mode 100644
index 000000000000..97b7d1df5aaa
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -0,0 +1,20 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+/include/ "ste-nomadik-stn8815.dtsi"
+
+/ {
+	model = "Calao Systems USB-S8815";
+	compatible = "calaosystems,usb-s8815";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+	};
+
+	/* Custom board node with GPIO pins to active etc */
+	usb-s8815 {
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
new file mode 100644
index 000000000000..0a5b670430de
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0x00000000 0x04000000>,
+		    <0x08000000 0x04000000>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,l210-cache";
+		reg = <0x10210000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <30>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	mtu0 {
+		/* Nomadik system timer */
+		reg = <0x101e2000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <4>;
+	};
+
+	mtu1 {
+		/* Secondary timer */
+		reg = <0x101e3000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <5>;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vica: intc@0x10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x20>;
+		};
+
+		vicb: intc@0x10140020 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140020 0x20>;
+		};
+
+		uart0: uart@101fd000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fd000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <12>;
+		};
+
+		uart1: uart@101fb000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fb000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <17>;
+		};
+
+		uart2: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <28>;
+			status = "disabled";
+		};
+	};
+};