ARM: tegra: Remove commas from unit addresses on Tegra124

Remove commas from unit addresses as suggested by Rob Herring upon me
posting initial Apalis TK1 support:

	http://article.gmane.org/gmane.linux.ports.tegra/26608

Please keep the remaining 0, notation on the GPU node in place as a
former mainline U-Boot version was looking for that particular notation
in order to perform required fix-ups on it.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 35 insertions, 35 deletions

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 9ce385e3aca5..e52b82449a79 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -10,8 +10,8 @@
 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 
 		/* This order keeps the mapping DB9 connector <-> ttyS0 */
 		serial0 = &uartd;
@@ -27,7 +27,7 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -40,21 +40,21 @@
 
 		/* Mini PCIe */
 		pci@1,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 
 		/* Gigabit Ethernet */
 		pci@2,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			hdmi-supply = <&vdd_5v0_hdmi>;
@@ -75,7 +75,7 @@
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1400,12 +1400,12 @@
 	};
 
 	/* DB9 serial port */
-	serial@0,70006300 {
+	serial@70006300 {
 		status = "okay";
 	};
 
 	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -1433,25 +1433,25 @@
 	};
 
 	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -1642,12 +1642,12 @@
 	};
 
 	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 	};
 
 	/* Internal SPI */
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -1657,7 +1657,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -1676,10 +1676,10 @@
 	};
 
 	/* Serial ATA */
-	sata@0,70020000 {
+	sata@70020000 {
 		status = "okay";
 
-		phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>;
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
 
 		hvdd-supply = <&vdd_3v3_lp0>;
@@ -1690,15 +1690,15 @@
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -1713,7 +1713,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -1800,7 +1800,7 @@
 	};
 
 	/* SD card */
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1810,40 +1810,40 @@
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
 	/* mini-PCIe USB */
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 	};
 
 	/* USB A connector */
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};