Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

1 files changed, 122 insertions, 42 deletions

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c2..8d40c00d64bb 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -91,7 +91,7 @@
 			reg = <0x01c00000 0x1000>;
 		};
 
-		dma: dma-controller@01c02000 {
+		dma: dma-controller@1c02000 {
 			compatible = "allwinner,sun8i-h3-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -100,7 +100,7 @@
 			#dma-cells = <1>;
 		};
 
-		mmc0: mmc@01c0f000 {
+		mmc0: mmc@1c0f000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c0f000 0x1000>;
 			resets = <&ccu RST_BUS_MMC0>;
@@ -111,7 +111,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc1: mmc@01c10000 {
+		mmc1: mmc@1c10000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c10000 0x1000>;
 			resets = <&ccu RST_BUS_MMC1>;
@@ -122,7 +122,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc2: mmc@01c11000 {
+		mmc2: mmc@1c11000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c11000 0x1000>;
 			resets = <&ccu RST_BUS_MMC2>;
@@ -133,7 +133,7 @@
 			#size-cells = <0>;
 		};
 
-		usb_otg: usb@01c19000 {
+		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-h3-musb";
 			reg = <0x01c19000 0x400>;
 			clocks = <&ccu CLK_BUS_OTG>;
@@ -146,7 +146,7 @@
 			status = "disabled";
 		};
 
-		usbphy: phy@01c19400 {
+		usbphy: phy@1c19400 {
 			compatible = "allwinner,sun8i-h3-usb-phy";
 			reg = <0x01c19400 0x2c>,
 			      <0x01c1a800 0x4>,
@@ -178,7 +178,7 @@
 			#phy-cells = <1>;
 		};
 
-		ehci0: usb@01c1a000 {
+		ehci0: usb@1c1a000 {
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -187,7 +187,7 @@
 			status = "disabled";
 		};
 
-		ohci0: usb@01c1a400 {
+		ohci0: usb@1c1a400 {
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -197,7 +197,7 @@
 			status = "disabled";
 		};
 
-		ehci1: usb@01c1b000 {
+		ehci1: usb@1c1b000 {
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -208,7 +208,7 @@
 			status = "disabled";
 		};
 
-		ohci1: usb@01c1b400 {
+		ohci1: usb@1c1b400 {
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,7 +220,7 @@
 			status = "disabled";
 		};
 
-		ehci2: usb@01c1c000 {
+		ehci2: usb@1c1c000 {
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1c000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -231,7 +231,7 @@
 			status = "disabled";
 		};
 
-		ohci2: usb@01c1c400 {
+		ohci2: usb@1c1c400 {
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -243,7 +243,7 @@
 			status = "disabled";
 		};
 
-		ehci3: usb@01c1d000 {
+		ehci3: usb@1c1d000 {
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1d000 0x100>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
@@ -254,7 +254,7 @@
 			status = "disabled";
 		};
 
-		ohci3: usb@01c1d400 {
+		ohci3: usb@1c1d400 {
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1d400 0x100>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -266,7 +266,7 @@
 			status = "disabled";
 		};
 
-		ccu: clock@01c20000 {
+		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
 			clocks = <&osc24M>, <&osc32k>;
@@ -275,7 +275,7 @@
 			#reset-cells = <1>;
 		};
 
-		pio: pinctrl@01c20800 {
+		pio: pinctrl@1c20800 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -310,7 +310,7 @@
 				function = "i2c2";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins_a: mmc0 {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
 				function = "mmc0";
@@ -318,13 +318,13 @@
 				bias-pull-up;
 			};
 
-			mmc0_cd_pin: mmc0_cd_pin@0 {
+			mmc0_cd_pin: mmc0_cd_pin {
 				pins = "PF6";
 				function = "gpio_in";
 				bias-pull-up;
 			};
 
-			mmc1_pins_a: mmc1@0 {
+			mmc1_pins_a: mmc1 {
 				pins = "PG0", "PG1", "PG2", "PG3",
 				       "PG4", "PG5";
 				function = "mmc1";
@@ -342,7 +342,7 @@
 				bias-pull-up;
 			};
 
-			spdif_tx_pins_a: spdif@0 {
+			spdif_tx_pins_a: spdif {
 				pins = "PA17";
 				function = "spdif";
 			};
@@ -357,7 +357,7 @@
 				function = "spi1";
 			};
 
-			uart0_pins_a: uart0@0 {
+			uart0_pins_a: uart0 {
 				pins = "PA4", "PA5";
 				function = "uart0";
 			};
@@ -381,9 +381,14 @@
 				pins = "PA13", "PA14";
 				function = "uart3";
 			};
+
+			uart3_rts_cts_pins: uart3_rts_cts {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
 		};
 
-		timer@01c20c00 {
+		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -391,7 +396,56 @@
 			clocks = <&osc24M>;
 		};
 
-		spi0: spi@01c68000 {
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -407,7 +461,7 @@
 			#size-cells = <0>;
 		};
 
-		spi1: spi@01c69000 {
+		spi1: spi@1c69000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c69000 0x1000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -423,13 +477,13 @@
 			#size-cells = <0>;
 		};
 
-		wdt0: watchdog@01c20ca0 {
+		wdt0: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		spdif: spdif@01c21000 {
+		spdif: spdif@1c21000 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-spdif";
 			reg = <0x01c21000 0x400>;
@@ -442,7 +496,7 @@
 			status = "disabled";
 		};
 
-		pwm: pwm@01c21400 {
+		pwm: pwm@1c21400 {
 			compatible = "allwinner,sun8i-h3-pwm";
 			reg = <0x01c21400 0x8>;
 			clocks = <&osc24M>;
@@ -450,7 +504,33 @@
 			status = "disabled";
 		};
 
-		codec: codec@01c22c00 {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
 			reg = <0x01c22c00 0x400>;
@@ -464,7 +544,7 @@
 			status = "disabled";
 		};
 
-		uart0: serial@01c28000 {
+		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -477,7 +557,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@01c28400 {
+		uart1: serial@1c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +570,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@01c28800 {
+		uart2: serial@1c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -503,7 +583,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@01c28c00 {
+		uart3: serial@1c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -516,7 +596,7 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@01c2ac00 {
+		i2c0: i2c@1c2ac00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -529,7 +609,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c1: i2c@01c2b000 {
+		i2c1: i2c@1c2b000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -542,9 +622,9 @@
 			#size-cells = <0>;
 		};
 
-		i2c2: i2c@01c2b400 {
+		i2c2: i2c@1c2b400 {
 			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b000 0x400>;
+			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
@@ -555,7 +635,7 @@
 			#size-cells = <0>;
 		};
 
-		gic: interrupt-controller@01c81000 {
+		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,
@@ -566,7 +646,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		rtc: rtc@01f00000 {
+		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -583,12 +663,12 @@
 			#reset-cells = <1>;
 		};
 
-		codec_analog: codec-analog@01f015c0 {
+		codec_analog: codec-analog@1f015c0 {
 			compatible = "allwinner,sun8i-h3-codec-analog";
 			reg = <0x01f015c0 0x4>;
 		};
 
-		ir: ir@01f02000 {
+		ir: ir@1f02000 {
 			compatible = "allwinner,sun5i-a13-ir";
 			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 			clock-names = "apb", "ir";
@@ -598,7 +678,7 @@
 			status = "disabled";
 		};
 
-		r_pio: pinctrl@01f02c00 {
+		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -609,7 +689,7 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			ir_pins_a: ir@0 {
+			ir_pins_a: ir {
 				pins = "PL11";
 				function = "s_cir_rx";
 			};