diff options
| author | Tuomas Tynkkynen <tuomas@tuxera.com> | 2017-12-22 23:57:37 +0300 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-02-13 11:37:22 +0300 |
| commit | 45e01f401a2a16a8d7ca910fe01c124451980bd8 (patch) | |
| tree | f18e6a5308ef03cce298d440115fb8d893463618 /arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | |
| parent | 88c23c05ef18f543fad7b26c95a3acc0ffb378cc (diff) | |
| download | linux-45e01f401a2a16a8d7ca910fe01c124451980bd8.tar.xz | |
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
Using the cd-inverted property is not useful when GPIOs are used as card
detects since the polarity can be specified with the usual
GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for
U-Boot developers, so migrate all sunxi boards away from cd-inverted.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index f3edf9ca435c..aab6c1720ef7 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -102,8 +102,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; |