Merge tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.11" from Maxime Ripard:

The usual chunk of DT changes, most notably:
  - Support for the H2+ and the V3s
  - CPUFreq support for the A33
  - SPDIF support for the A31 and H3
  - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
    Orange Pi Zero

* tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (42 commits)
  ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
  ARM: dts: sun8i-h3: Add the SPDIF block to the H3
  ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
  ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB
  ARM: sun8i: sina33: Enable display
  ARM: sun8i: a23/a33: Add the oscillators accuracy
  ARM: sun8i: a23/a33: Enable the real LOSC and use it
  ARM: dts: sunxi: add support for Lichee Pi Zero board
  ARM: dts: sunxi: add dtsi file for V3s SoC
  ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode
  ARM: dts: sun8i: reference-design: use AXP223 DTSI
  ARM: dts: sun8i: parrot: use AXP223 DTSI
  ARM: dts: sun8i: sina33: use AXP223 DTSI
  ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI
  ARM: dts: add DTSI for AXP223
  dt-bindings: power: axp20x-usb: add axp223 compatible
  ARM: dts: sun7i: Add wifi dt node on Banana Pro
  ARM: dts: sun6i: Add SPDIF to the Mele I7
  devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
  ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec
  ...

1 files changed, 22 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 53e940738c7f..8b0b6a2dafba 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -547,6 +547,7 @@
 						 "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc1_pins_a: mmc1@0 {
@@ -554,6 +555,7 @@
 						 "PG4", "PG5";
 				function = "mmc1";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_pins_a: mmc2@0 {
@@ -571,6 +573,7 @@
 						 "PC24";
 				function = "mmc2";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc3_8bit_emmc_pins: mmc3@1 {
@@ -580,6 +583,12 @@
 						 "PC24";
 				function = "mmc3";
 				drive-strength = <40>;
+				bias-pull-up;
+			};
+
+			spdif_pins_a: spdif@0 {
+				pins = "PH28";
+				function = "spdif";
 			};
 
 			uart0_pins_a: uart0@0 {
@@ -604,6 +613,19 @@
 			reg = <0x01c20ca0 0x20>;
 		};
 
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_APB1_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;