Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 64 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b421f7fa197b..6b24876ed462 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -48,8 +48,12 @@
  */
 
 /dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A13-Olinuxino";
@@ -65,7 +69,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -87,22 +91,62 @@
 			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
 				allwinner,pins = "PG0";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
 				allwinner,pins = "PG11";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
 			};
 		};
 
@@ -116,6 +160,15 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins_a>;
 			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		i2c1: i2c@01c2b000 {
@@ -137,14 +190,14 @@
 		pinctrl-0 = <&led_pins_olinuxino>;
 
 		power {
-			gpios = <&pio 6 9 0>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
 	reg_usb1_vbus: usb1-vbus {
 		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 0>;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };