diff options
| author | Hugues Fruchet <hugues.fruchet@st.com> | 2019-02-28 17:25:45 +0300 |
|---|---|---|
| committer | Alexandre Torgue <alexandre.torgue@st.com> | 2019-05-21 12:57:31 +0300 |
| commit | d0352ebdd8e087a7db7367784b0163a18bedcb4f (patch) | |
| tree | 6cc3c5b90273785c2ebf21f192ac47c21584f19a /arch/arm/boot/dts/stm32mp157c-ev1.dts | |
| parent | 46cf917d0658c069aaddaf73cdef6baf2fe423da (diff) | |
| download | linux-d0352ebdd8e087a7db7367784b0163a18bedcb4f.tar.xz | |
ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
Enable OV5640 camera sensor driver of MB1379A extension
board connected on CN7 connector of stm32mp157c-ev1 board:
bus-width is set to 8, data-shift is set to 2 (lines 9:2 are used),
hsync-active is set to 0 for horizontal synchro line active low,
vsync-active is set to 0 for vertical synchro line active low and
pclk-sample is set to 1 for pixel clock polarity sampling data
on rising edge of the pixel clock signal.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Diffstat (limited to 'arch/arm/boot/dts/stm32mp157c-ev1.dts')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp157c-ev1.dts | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index d3acbb78f754..8ef2cb0f5a7d 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -22,6 +22,14 @@ ethernet0 = ðernet0; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + joystick { compatible = "gpio-keys"; #size-cells = <0>; @@ -73,6 +81,23 @@ status = "okay"; }; +&dcmi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_a>; + pinctrl-1 = <&dcmi_sleep_pins_a>; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &dsi { #address-cells = <1>; #size-cells = <0>; @@ -138,6 +163,31 @@ i2c-scl-falling-time-ns = <20>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&ov5640_pins>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&v2v8>; + powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + rotation = <180>; + status = "okay"; + + port { + ov5640_0: endpoint { + remote-endpoint = <&dcmi_0>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + stmfx: stmfx@42 { compatible = "st,stmfx-0300"; reg = <0x42>; @@ -158,6 +208,12 @@ drive-push-pull; bias-pull-down; }; + + ov5640_pins: camera { + pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ + drive-push-pull; + output-low; + }; }; }; }; |