Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

1 files changed, 37 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ee0da970e8ad..b2a2b5c38caa 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -450,6 +450,8 @@
 				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
 				interrupt-parent = <&adc>;
 				interrupts = <0>;
+				dmas = <&dma2 0 0 0x400 0x0>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 
@@ -460,6 +462,8 @@
 				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
 				interrupt-parent = <&adc>;
 				interrupts = <1>;
+				dmas = <&dma2 3 1 0x400 0x0>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 
@@ -470,6 +474,8 @@
 				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
 				interrupt-parent = <&adc>;
 				interrupts = <2>;
+				dmas = <&dma2 1 2 0x400 0x0>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 		};
@@ -666,6 +672,28 @@
 				};
 			};
 
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
 			usbotg_hs_pins_a: usbotg_hs@0 {
 				pins {
 					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
@@ -805,6 +833,15 @@
 			status = "disabled";
 		};
 
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 39>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
 		rng: rng@50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;