diff options
| author | Stephan Gerhold <stephan@gerhold.net> | 2019-12-19 23:20:50 +0300 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2019-12-26 02:11:59 +0300 |
| commit | fbb7c4a13c96c1e76d92b007a6852cecb27f7b0f (patch) | |
| tree | 56f657b45cdcfbda1cd6613707f543099523c574 /arch/arm/boot/dts/ste-ux500-samsung-golden.dts | |
| parent | 234a0387f73cd109e03aee8c2d6f26a54b69d403 (diff) | |
| download | linux-fbb7c4a13c96c1e76d92b007a6852cecb27f7b0f.tar.xz | |
ARM: dts: ux500: samsung-golden: Add WiFi
samsung-golden uses a BCM4334 WiFi+BT combo chip, connected to SDIO.
It is supported by the brcmfmac driver in mainline,
so we only need to set up the device tree to make it work correctly.
Note: brcmfmac requires (proprietary) firmware + a device-specific
NVRAM file. Both can be extracted from the stock Android system
used on samsung-golden:
- /system/etc/wifi/bcmdhd_sta.bin_b2 -> /lib/firmware/brcm/brcmfmac4334-sdio.bin
- /system/etc/wifi/nvram_net.txt_GPIO4 -> /lib/firmware/brcm/brcmfmac4334-sdio.samsung,golden.txt
brcmfmac4334-sdio.bin from linux-firmware also seems to work,
but results in occasional errors for some reason.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-8-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-ux500-samsung-golden.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index e75a425d177e..d22b2879c46a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -64,9 +64,27 @@ non-removable; cap-sd-highspeed; + vmmc-supply = <&wl_reg_on>; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc1_a_2_default>; pinctrl-1 = <&mc1_a_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + /* GPIO216 (WLAN_HOST_WAKE) */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default>; + }; }; /* eMMC */ @@ -290,6 +308,28 @@ pinctrl-names = "default"; pinctrl-0 = <&sd_level_translator_default>; }; + + /* + * WL_REG_ON takes WLAN out of reset and enables the internal regulators. + * The voltage specified here is only used to determine the OCR mask, + * the BCM chip is actually connected directly to VBAT. + */ + wl_reg_on: regulator-wl-reg-on { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg-on"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + startup-delay-us = <100000>; + + /* GPIO215 (WLAN_EN) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; }; &pinctrl { @@ -340,6 +380,22 @@ }; }; + wlan { + wlan_default: wlan_default { + golden_cfg1 { + pins = "GPIO216_AG12"; /* WLAN_HOST_WAKE */ + ste,config = <&gpio_in_pd>; + }; + }; + + wlan_en_default: wlan_en_default { + golden_cfg1 { + pins = "GPIO215_AH13"; /* WLAN_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + vibrator { vibrator_default: vibrator_default { golden_cfg1 { |