ARM: ux500: move last AB8505 set-up to DT

This moves the set-up of the HREF500 with its AB8505 ASIC to
a device tree include. Since there is not yet any device tree
for this board the DTSI is currently unused. After this delete
the board file for pins for good and migration of pins to the
device tree is complete.

Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 240 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..6006d62086a2
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				ab8505-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio34_default_mode>,
+						    <&gpio50_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi2_default_mode>,
+						    <&modsclsda_default_mode>,
+						    <&resethw_default_mode>,
+						    <&service_default_mode>;
+
+					/*
+					 * Pins 2, 10, 11, 13, 34 and 50
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio2_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO2_R5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio10_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO10_B16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio11_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO11_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio13_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO13_D17";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					gpio34 {
+						gpio34_default_mode: gpio34_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio34_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO34_H14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio50 {
+						gpio50_default_mode: gpio50_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio50_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO50_L4";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pin 14 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								ste,function = "pwmout";
+								ste,pins = "pwmout1_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO14_C16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 2 */
+					adi2 {
+						adi2_default_mode: adi2_default {
+							default_mux {
+								ste,function = "adi2";
+								ste,pins = "adi2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO17_P2",
+									 "GPIO18_N3",
+									 "GPIO19_T1",
+									 "GPIO20_P3";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								ste,function = "modsclsda";
+								ste,pins = "modsclsda_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO40_J15",
+									"GPIO41_J14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					resethw {
+						resethw_default_mode: resethw_default {
+							default_mux {
+								ste,function = "resethw";
+								ste,pins = "resethw_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO52_D16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					service {
+						service_default_mode: service_default {
+							default_mux {
+								ste,function = "service";
+								ste,pins = "service_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO53_D15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio1_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio3_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};