Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Olof Johansson:
 "As always, a large number of DT updates. Too many to enumerate them
  all, but at a glance:

  New SoCs introduced in this release:

   - Amlogic:
      + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
        set top boxes and other products.

   - Mediatek:
      + MT7623A, which is a flavor of the MT7623 family with other
        on-chip ethernet options.

   - Qualcomm:
      + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
        (Cortex-A75/A55 derivative) SoC that's one of the current
        high-end mobile SoCs.

        It's great to see mainline support for it. So far, you can't do
        much with it, since a lot of peripherals are not yet in the DTs
        but driver support for USB, GPU and other pieces are starting to
        trickle in. This might end up being a well-supported SoC
        upstream if the momentum keeps up.

   - Renesas:
      + R8A77990, a.k.a R-Car E3, a new automotive
        entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
        enabled, we are eagerly awaiting more. So far, basic drivers
        such as serial, gpios, PMU and ethernet are enabled.
      + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
        GPU. Same here, basic set of drivers such as serial, gpios and
        ethernet enabled, and SMP support is also forthcoming.

   - STMicroelectronics:
      + STM32F469, very similar tih STM32F429 but with display support

  Enhancements to SoCs/platforms (DTS contents, some driver portions
  might not be in yet):
   - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
   - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
   - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
   - Marvell Berlin2CD: SMP support, thermal sensors
   - Mediatek MT7623: Highspeed DMA, audio support
   - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
   - Renesas: Watchdog and PMU support across many platforms
   - Rockchip RK3399: USB3 OTG support
   - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
   - STMicro STM32: Lots of peripherals added to STM32MP175C
   - Uniphier: Ethernet support

  New boards:
   - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
   - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
   - Allwinner A33: Nintendo NES/SuperNES Classic Edition
   - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
   - Berlin2CD: Valve Steam Link
   - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
   - Broadcom: Raspberry Pi 3 B+
   - Mediatek MT7623N and MT7623A: reference boards
   - Meson 8M2: Tronsmart MXIII Plus
   - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
   - Qualcomm MSM8974: Sony Xperia Z1 Compact support
   - Qualcomm SDM845: MTP development board
   - Renesas: Ebisu R8A77990 board
   - Renesas RZ/G1C: iwg23s: iWave G235-SDB
   - TI am335x: Pocketbeagle support"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
  ARM: dts: aspeed: Fix hwrng register address
  arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
  arm64: dts: sprd: Add GPIO and GPIO keys device nodes
  arm64: dts: sprd: fix typo in 'remote-endpoint'
  arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
  arm64: dts: fix regulator property name for wlan pcie endpoint
  arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
  ARM: dts: pxa3xx: fix MMC clocks
  ARM: pxa: dts: add pin definitions for extended GPIOs
  ARM: pxa: dts: add gpio-ranges to gpio controller
  ARM: dts: ipq8074: Enable few peripherals for hk01 board
  ARM: dts: ipq8074: Add pcie nodes
  ARM: dts: ipq8074: Add peripheral nodes
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
  ARM: dts: ipq4019: Change the max opp frequency
  ...

1 files changed, 0 insertions, 94 deletions

diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
deleted file mode 100644
index 6eaaf638e52e..000000000000
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-ccu8540-pinctrl.dtsi"
-
-/ {
-	model = "ST-Ericsson U8540 platform with Device Tree";
-	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
-	};
-
-	soc {
-		pinctrl {
-			compatible = "stericsson,db8540-pinctrl";
-		};
-
-		prcmu@80157000 {
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c0: i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c1: i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c2: i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-		};
-
-		i2c3: i2c@80110000 {
-			status = "disabled";
-		};
-
-		i2c4: i2c@8012a000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
-			pinctrl-1 = <&i2c4_sleep_mode>;
-		};
-
-		i2c5: i2c@80001000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
-			pinctrl-1 = <&i2c5_sleep_mode>;
-		};
-	};
-};