Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...

1 files changed, 845 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/socionext/uniphier-pxs2.dtsi b/arch/arm/boot/dts/socionext/uniphier-pxs2.dtsi
new file mode 100644
index 000000000000..f97a57222101
--- /dev/null
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2.dtsi
@@ -0,0 +1,845 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cpu_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;	/* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;	/* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-size = <(1280 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1";
+			ngpios = <232>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-pxs2-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ain1>,
+				    <&pinctrl_ain2>,
+				    <&pinctrl_ainiec1>,
+				    <&pinctrl_aout2>,
+				    <&pinctrl_aout3>,
+				    <&pinctrl_aoutiec1>,
+				    <&pinctrl_aoutiec2>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_line: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_aux: endpoint {
+				};
+			};
+
+			spdif_port0: port@3 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			spdif_port1: port@4 {
+				spdif_iecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@5 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port1: port@6 {
+				comp_spdif_iecout1: endpoint {
+				};
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-pxs2-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs2-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs2-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-pxs2-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs2-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs2-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a000000 0x800>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs2-pinctrl";
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x58>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs2-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-pxs2-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs2-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs2-reset";
+				#reset-cells = <1>;
+			};
+
+			pvtctl: thermal-sensor {
+				compatible = "socionext,uniphier-pxs2-thermal";
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f86 0x6844>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs2-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ahci: sata@65600000 {
+			compatible = "socionext,uniphier-pxs2-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci_phy: phy@10 {
+				compatible = "socionext,uniphier-pxs2-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"