ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 1376 deletions

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
deleted file mode 100644
index 5ef5026fb7bc..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ /dev/null
@@ -1,1376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm IPQ8064";
-	compatible = "qcom,ipq8064";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	thermal-zones {
-		sensor0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor8-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor9-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		sensor10-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
-					  IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nss@40000000 {
-			reg = <0x40000000 0x1000000>;
-			no-map;
-		};
-
-		smem: smem@41000000 {
-			compatible = "qcom,smem";
-			reg = <0x41000000 0x200000>;
-			no-map;
-
-			hwlocks = <&sfpb_mutex 3>;
-		};
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq806x", "qcom,scm";
-		};
-	};
-
-	stmmac_axi_setup: stmmac-axi-config {
-		snps,wr_osr_lmt = <7>;
-		snps,rd_osr_lmt = <7>;
-		snps,blen = <16 0 0 0 0 0 0>;
-	};
-
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-ipq8064";
-			reg = <0x00108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-				#clock-cells = <1>;
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			speedbin_efuse: speedbin@c0 {
-				reg = <0xc0 0x4>;
-			};
-			tsens_calib: calib@400 {
-				reg = <0x400 0xb>;
-			};
-			tsens_calib_backup: calib_backup@410 {
-				reg = <0x410 0xb>;
-			};
-		};
-
-		qcom_pinmux: pinmux@800000 {
-			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x00800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&qcom_pinmux 0 0 69>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pcie0_pins: pcie0_pinmux {
-				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie1_pins: pcie1_pinmux {
-				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie2_pins: pcie2_pinmux {
-				mux {
-					pins = "gpio63";
-					function = "pcie3_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			i2c4_pins: i2c4-default {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				drive-strength = <12>;
-				bias-disable;
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
-			};
-
-			leds_pins: leds_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9",
-					       "gpio26", "gpio53";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-					output-low;
-				};
-			};
-
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			nand_pins: nand_pins {
-				mux {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38", "gpio39",
-					       "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				pullups {
-					pins = "gpio39";
-					function = "nand";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-bus-hold;
-				};
-			};
-
-			mdio0_pins: mdio0-pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2-pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29",
-					       "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59",
-					       "gpio60", "gpio61", "gpio62";
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064", "syscon";
-			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
-			clock-names = "pxo", "cxo", "pll4";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			tsens: thermal-sensor {
-				compatible = "qcom,ipq8064-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		sfpb_mutex: hwlock@1200600 {
-			compatible = "qcom,sfpb-mutex";
-			reg = <0x01200600 0x100>;
-
-			#hwlock-cells = <1>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <25000000>;
-			clocks = <&sleep_clk>;
-			clock-names = "sleep";
-			cpu-offset = <0x80000>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
-			reg = <0x02011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			#clock-cells = <0>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu0_aux";
-			#clock-cells = <0>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		nss_common: syscon@3000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
-		};
-
-		usb3_0: usb@100f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x100f8800 0x8000>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_0: usb@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_0>, <&ss_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_0: phy@100f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_0: phy@100f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb3_1: usb@110f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x110f8800 0x8000>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_1: usb@11000000 {
-				compatible = "snps,dwc3";
-				reg = <0x11000000 0xcd00>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_1>, <&ss_phy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_1: phy@110f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x110f8800 0x30>;
-			clocks = <&gcc USB30_1_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_1: phy@110f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x110f8830 0x30>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sdcc3bam: dma-controller@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc1bam: dma-controller@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		gsbi1: gsbi@12440000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x12440000 0x100>;
-			cell-index = <1>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi1_serial: serial@12450000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12450000 0x100>,
-				      <0x12400000 0x03>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-
-				status = "disabled";
-			};
-
-			gsbi1_i2c: i2c@12460000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x12460000 0x1000>;
-				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		gsbi2: gsbi@12480000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_serial: serial@12490000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12490000 0x1000>,
-				      <0x12480000 0x1000>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi2_i2c: i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x100>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi4_serial: serial@16340000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16340000 0x1000>,
-				      <0x16300000 0x1000>;
-				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16500000 0x100>;
-			cell-index = <6>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-
-			gsbi6_spi: spi@16580000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		adm_dma: dma-controller@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				 <&gcc ADM0_PBUS_RESET>,
-				 <&gcc ADM0_C0_RESET>,
-				 <&gcc ADM0_C1_RESET>,
-				 <&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "pbus", "c0", "c1", "c2";
-			qcom,ee = <0>;
-
-			status = "disabled";
-		};
-
-		gsbi5: gsbi@1a200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x1000>,
-				      <0x1a200000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@1a280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-ipq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		nand: nand-controller@1ac00000 {
-			compatible = "qcom,ipq806x-nand";
-			reg = <0x1ac00000 0x800>;
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			clocks = <&gcc EBI2_CLK>,
-				 <&gcc EBI2_AON_CLK>;
-			clock-names = "core", "aon";
-
-			dmas = <&adm_dma 3>;
-			dma-names = "rxtx";
-			qcom,cmd-crci = <15>;
-			qcom,data-crci = <3>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
-
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		pcie0: pci@1b500000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_CLK>,
-				 <&gcc PCIE_AUX_CLK>,
-				 <&gcc PCIE_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>,
-				 <&gcc PCIE_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-		};
-
-		pcie1: pci@1b700000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b700000 0x1000
-			       0x1b702000 0x80
-			       0x1b800000 0x100
-			       0x31f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <1>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_1_A_CLK>,
-				 <&gcc PCIE_1_H_CLK>,
-				 <&gcc PCIE_1_PHY_CLK>,
-				 <&gcc PCIE_1_AUX_CLK>,
-				 <&gcc PCIE_1_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_1_ACLK_RESET>,
-				 <&gcc PCIE_1_HCLK_RESET>,
-				 <&gcc PCIE_1_POR_RESET>,
-				 <&gcc PCIE_1_PCI_RESET>,
-				 <&gcc PCIE_1_PHY_RESET>,
-				 <&gcc PCIE_1_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-		};
-
-		pcie2: pci@1b900000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b900000 0x1000
-			       0x1b902000 0x80
-			       0x1ba00000 0x100
-			       0x35f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <2>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
-				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
-
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_2_A_CLK>,
-				 <&gcc PCIE_2_H_CLK>,
-				 <&gcc PCIE_2_PHY_CLK>,
-				 <&gcc PCIE_2_AUX_CLK>,
-				 <&gcc PCIE_2_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_2_ACLK_RESET>,
-				 <&gcc PCIE_2_HCLK_RESET>,
-				 <&gcc PCIE_2_POR_RESET>,
-				 <&gcc PCIE_2_PCI_RESET>,
-				 <&gcc PCIE_2_PHY_RESET>,
-				 <&gcc PCIE_2_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie2_pins>;
-			pinctrl-names = "default";
-
-			status = "disabled";
-			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-		};
-
-		qsgmii_csr: syscon@1bb00000 {
-			compatible = "syscon";
-			reg = <0x1bb00000 0x000001FF>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
-		};
-
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
-
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
-
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		gmac0: ethernet@37000000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37000000 0x200000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE1_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE1_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac1: ethernet@37200000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37200000 0x200000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE2_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE2_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac2: ethernet@37400000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37400000 0x200000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE3_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE3_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-
-		gmac3: ethernet@37600000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37600000 0x200000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE4_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE4_RESET>,
-				 <&gcc GMAC_AHB_RESET>;
-			reset-names = "stmmaceth", "ahb";
-
-			status = "disabled";
-		};
-	};
-};