ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 234 deletions

diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
deleted file mode 100644
index 03471d30bfd9..000000000000
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie d2 Network";
-	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
-			label = "Front Push Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_on {
-			label = "Power rocker switch (on|auto)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_off {
-			label = "Power rocker switch (auto|off)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372b";
-		reg = <0x32>;
-	};
-
-	fan@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-
-		/* Not enough HW info */
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
-	pinctrl-names = "default";
-
-	pmx_board_id: pmx-board-id {
-		marvell,pins = "mpp0", "mpp1", "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp8", "mpp9", "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_fail: pmx-fan-fail {
-		marvell,pins = "mpp5";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP6: Red front LED
-	 * MPP16: Blue front LED blink control
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp6", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata0_power: pmx-sata0-power {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	pmx_sata1_power: pmx-sata1-power {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};