ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 179 deletions

diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
deleted file mode 100644
index c6b79ba8bbc9..000000000000
--- a/arch/arm/boot/dts/omap4-kc1.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Amazon Kindle Fire (first generation)";
-	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "green";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		led-2 {
-			label = "orange";
-			pwms = <&twl_pwm 1 7812500>;
-			max-brightness = <127>;
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-
-	uart3_pins: uart3-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
-		>;
-	};
-
-	i2c1_pins: i2c1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: i2c2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: i2c3-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: i2c4-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc2_pins: mmc2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
-			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
-			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
-			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
-			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
-			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
-			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
-			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
-			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
-			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
-		>;
-	};
-
-	usb_otg_hs_pins: usb-otg-hs-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
-			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
-			OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dm */
-		>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-
-		twl_power: power {
-			compatible = "ti,twl6030-power";
-			ti,system-power-controller;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	vmmc-supply = <&vaux1>;
-	ti,non-removable;
-	bus-width = <8>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_otg_hs_pins>;
-
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};