diff options
| author | Sebastian Reichel <sebastian.reichel@collabora.co.uk> | 2017-07-24 20:33:11 +0300 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2017-12-21 17:46:54 +0300 |
| commit | 252130d8d6e082041589ff5b22708e39971303c0 (patch) | |
| tree | fd4133ba0767c70471ead3c5864ccd6d969d7198 /arch/arm/boot/dts/omap3-n950.dts | |
| parent | d6c95d54b8a827618dbeccb5054aff4fb6903215 (diff) | |
| download | linux-252130d8d6e082041589ff5b22708e39971303c0.tar.xz | |
ARM: dts: n950: add display support
Add basic panel support for the Nokia N950. It must be tweaked a
little bit later, since the panel was built into the device
upside-down. Also the first 5 and the last 5 pixels are covered
by plastic.
Signed-off-By: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap3-n950.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3-n950.dts | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index c354a1ed1e70..2354e09343f3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -51,6 +51,26 @@ }; }; +&omap3_pmx_core { + dsi_pins: pinmux_dsi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+ */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk- */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */ + >; + }; + + display_pins: pinmux_display_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -186,3 +206,71 @@ st,max-limit-y = <32>; st,max-limit-z = <32>; }; + +&dss { + status = "ok"; + + vdda_video-supply = <&vdac>; +}; + +&dsi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dsi_pins>; + + vdd-supply = <&vpll2>; + + port { + dsi_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <2 3 0 1 4 5>; + }; + }; + + lcd0: display { + compatible = "nokia,himalaya", "panel-dsi-cm"; + label = "lcd0"; + + pinctrl-names = "default"; + pinctrl-0 = <&display_pins>; + + vpnl-supply = <&vmmc2>; + vddi-supply = <&vio>; + + reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; /* 62 */ + + width-mm = <49>; /* 48.960 mm */ + height-mm = <88>; /* 88.128 mm */ + + /* TODO: + * - panel is upside-down + * - top + bottom 5px are not visible + */ + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <480>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <864>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi_out_ep>; + }; + }; + }; +}; |