Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

1 files changed, 243 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
new file mode 100644
index 000000000000..f5aeb3959afd
--- /dev/null
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -0,0 +1,243 @@
+/*
+ * Common CPCAP configuration used on Motorola phones
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&mcspi1 {
+	cpcap: pmic@0 {
+		compatible = "motorola,cpcap", "st,6556002";
+		reg = <0>;	/* cs0 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <3000000>;
+		spi-cs-high;
+
+		cpcap_adc: adc {
+			compatible = "motorola,mapphone-cpcap-adc";
+			interrupts-extended = <&cpcap 8 0>;
+			interrupt-names = "adcdone";
+			#io-channel-cells = <1>;
+		};
+
+		cpcap_charger: charger {
+			compatible = "motorola,mapphone-cpcap-charger";
+			interrupts-extended = <
+				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+				&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+			>;
+			interrupt-names =
+				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+				"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+				      &gpio3 23 GPIO_ACTIVE_LOW>;
+			io-channels = <&cpcap_adc 0 &cpcap_adc 1
+				       &cpcap_adc 2 &cpcap_adc 5
+				       &cpcap_adc 6>;
+			io-channel-names = "battdetb", "battp",
+					   "vbus", "chg_isense",
+					   "batti";
+		};
+
+		cpcap_regulator: regulator {
+			compatible = "motorola,mapphone-cpcap-regulator";
+
+			cpcap_regulators: regulators {
+			};
+		};
+
+		cpcap_rtc: rtc {
+			compatible = "motorola,cpcap-rtc";
+
+			interrupt-parent = <&cpcap>;
+			interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+		};
+
+		power_button: button {
+			compatible = "motorola,cpcap-pwrbutton";
+
+			interrupts = <23 IRQ_TYPE_NONE>;
+		};
+
+		cpcap_usb2_phy: phy {
+			compatible = "motorola,mapphone-cpcap-usb-phy";
+			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+			pinctrl-1 = <&usb_ulpi_pins>;
+			pinctrl-2 = <&usb_utmi_pins>;
+			pinctrl-3 = <&uart3_pins>;
+			pinctrl-names = "default", "ulpi", "utmi", "uart";
+			#phy-cells = <0>;
+			interrupts-extended = <
+				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+				&cpcap 48 1
+			>;
+			interrupt-names =
+				"id_ground", "id_float", "se0conn", "vbusvld",
+				"sessvld", "sessend", "se1", "dm", "dp";
+			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+				      &gpio1 0 GPIO_ACTIVE_HIGH>;
+			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+			io-channel-names = "vbus", "id";
+			vusb-supply = <&vusb>;
+		};
+
+		led_red: led-red {
+			compatible = "motorola,cpcap-led-red";
+			vdd-supply = <&sw5>;
+			label = "status-led:red";
+		};
+
+		led_green: led-green {
+			compatible = "motorola,cpcap-led-green";
+			vdd-supply = <&sw5>;
+			label = "status-led:green";
+		};
+
+		led_blue: led-blue {
+			compatible = "motorola,cpcap-led-blue";
+			vdd-supply = <&sw5>;
+			label = "status-led:blue";
+		};
+
+		led_adl: led-adl {
+			compatible = "motorola,cpcap-led-adl";
+			vdd-supply = <&sw5>;
+			label = "button-backlight";
+		};
+
+		led_cp: led-cp {
+			compatible = "motorola,cpcap-led-cp";
+			vdd-supply = <&sw5>;
+			label = "shift-key-light";
+		};
+	};
+};
+
+&cpcap_regulators {
+	sw5: SW5 {
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		regulator-enable-ramp-delay = <50000>;
+		regulator-boot-on;
+	};
+
+	vcam: VCAM {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	/* Used by DSS */
+	vcsi: VCSI {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <1000>;
+		regulator-boot-on;
+	};
+
+	vdac: VDAC {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vdig: VDIG {
+		regulator-min-microvolt = <1875000>;
+		regulator-max-microvolt = <1875000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vfuse: VFUSE {
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vhvio: VHVIO {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+		regulator-always-on;
+	};
+
+	/* Used by eMMC at mmc2 */
+	vsdio: VSDIO {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vpll: VPLL {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <100>;
+	};
+
+	vrf1: VRF1 {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vrf2: VRF2 {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vrfref: VRFREF {
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <100>;
+	};
+
+	vwlan1: VWLAN1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	/* Used by micro-SDIO at mmc1 */
+	vwlan2: VWLAN2 {
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vsim: VSIM {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vsimcard: VSIMCARD {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vvib: VVIB {
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-enable-ramp-delay = <500>;
+	};
+
+	vusb: VUSB {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vaudio: VAUDIO {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+};