Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:

mvebu DT changes for v3.16

 - kirkwood
    - rework nsa3x0 board to add nsa320
    - large cleanup to facilitate use in barebox
    - guruplug phy updates
    - audio updates for t5325

 - mvebu
    - use clocks vice clock-frequency for uart nodes

    - armada 375/380/385
       - add watchdog node
       - add coherency fabric
       - add smp support
       - add sdhci
       - add ahci
       - add thermal sensor

    - armada 370/XP
       - and pmsu

* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
  ARM: Kirkwood: t5325: Use simple card to instantiate audio
  ARM: Kirkwood: DT: Add missing #sound-dai-cells property
  ARM: Kirkwood: Add node for audio codec
  ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
  ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
  ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
  ARM: dts: kirkwood: set default pinctrl for I2C0
  ARM: dts: kirkwood: set default pinctrl for NAND
  ARM: dts: kirkwood: set default pinctrl for SPI0
  ARM: dts: kirkwood: set default pinctrl for UART0/1
  ARM: dts: kirkwood: set default pinctrl for GBE1
  ARM: dts: kirkwood: consolidate common pinctrl settings
  ARM: dts: kirkwood: add pinctrl node to common SoC include
  ARM: dts: kirkwood: rename pin-controller nodes
  ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
  ARM: dts: kirkwood: add stdout-path property to all boards
  ARM: dts: kirkwood: add node labels
  ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
  ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
  ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 3 insertions, 54 deletions

diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index 27ca6a79c48a..3d2b3d494c19 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
 
 /*
  * There are at least two different NSA310 designs. This variant does
@@ -17,10 +17,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
 
 			pmx_led_esata_green: pmx-led-esata-green {
@@ -38,11 +39,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_sys_green: pmx-led-sys-green {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
@@ -53,26 +49,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_hdd_green: pmx-led-hdd-green {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
@@ -83,11 +59,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
 		};
 
 		i2c@11000 {
@@ -100,28 +71,6 @@
 		};
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";